Applications
RETBC2 wired camera can be used for professional Video surveillance applications. It can be connected, through A/V cable, directly to TV/monitor or can be integrated in a wireless system using Wireless Transmitters. This B/W camera is very useful for shots in low-light conditions and environments (even in the dark by using Infrared Illuminators).
The camera is complete of built-in microphone for Audio reception and it's compatible with all the range of NSH Lenses. RETBC2 mounts the fascinating Sony SuperHAD(TM) CCD sensor, unbeatable for brightness and with a resolution higher than the average cameras on the market. Last generation DSP digital electronics guarantees an extraordinary fidelity of colors and an S/N ratio more than 48 dB, warranty of clear crisp images.

On the camera rear there are some micro-switches, to optimize images under different environmental conditions, to take advantage of the DSP digital control:

• BLC On/Off (Backlight compensation)

• Auto-iris or Electronic Shutter (EE-AI). Select EE for automatic shutter control, when using fixed-iris lenses. Select AI when using auto-iris lenses.

• AGC On/Off. Automatic Gain Control to improve performances under low-light conditions.

Cabling and installation
RETBC2 camera can be directly connected to TV/monitor through an A/V cable. 12VDC power is supplied by an REAL4S 220VAC/12VDC adapter (sold separately). If you want to control many cameras you can use a Switcher, Quad or Multiplexer. Last generation Stand-alone Digital Video Recorders don't need any additional devices to control the cameras, that can be directly connected to the DVR inputs. Connecting the camera to an Wireless Transmitter, you can build your own Wireless CCTV system.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Don't forget to order the REAL4S Power Supply, the REST1 Support bracket and the Lenses. If the video cable has an RCA connector you'll need an REBNCRCA1 Adapter.

Applications
RETCC2 wired camera can be used for professional Video surveillance applications. It can be connected, through A/V cable, directly to TV/monitor or can be integrated in a wireless system using Wireless Transmitters. This color camera needs more environmental brightness than a B/W camera, but offers a more realistic image.
The camera is complete of built-in microphone for Audio reception and it's compatible with all the range of NSH Lenses. RETBC2 mounts the fascinating Sony SuperHAD(TM) CCD sensor, unbeatable for brightness and with a resolution higher than the average cameras on the market. Last generation DSP digital electronics guarantees an extraordinary fidelity of colors and an S/N ratio more than 48 dB, warranty of clear crisp images.

On the camera rear there are some micro-switches, to optimize images under different environmental conditions, to take advantage of the DSP digital control:

• BLC On/Off (Backlight compensation)

• Auto-iris or Electronic Shutter (EE-AI). Select EE for automatic shutter control, when using fixed-iris lenses. Select AI when using auto-iris lenses.

• AWB On/Off. Automatic white balance.

Cabling and installation
RETCC2 camera can be directly connected to TV/monitor through an A/V cable. 12VDC power is supplied by an REAL4S 220VAC/12VDC adapter (sold separately). If you want to control many cameras you can use a Switcher, Quad or Multiplexer. Last generation Stand-alone Digital Video Recorders don't need any additional devices to control the cameras, that can be directly connected to the DVR inputs. Connecting the camera to an Wireless Transmitter, you can build your own Wireless CCTV system.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Don't forget to order the REAL4S Power Supply, the REST1 Support bracket and the Lenses. If the video cable has an RCA connector you'll need an REBNCRCA1 Adapter.

Applications
RETBC5 wired camera can be used for professional Video surveillance applications. It can be connected, through A/V cable, directly to TV/monitor or can be integrated in a wireless system using Wireless Transmitters. This B/W camera is very useful for shots in low-light conditions and environments (even in the dark by using Infrared Illuminators).
The camera is complete of built-in microphone for Audio reception and it's compatible with all the range of NSH Lenses. RETBC5 mounts the fascinating Sony EXview HAD(TM) CCD sensor, the only one that guarantees shots under very-low light conditions (up to 0.001 Lux) and with an high-resolution, better than the average cameras on the market. Last generation DSP digital electronics guarantees an extraordinary fidelity of colors and an S/N ratio more than 52 dB, warranty of clear crisp images.

On the camera rear there are some micro-switches, to optimize images under different environmental conditions, to take advantage of the DSP digital control:

• BLC On/Off (Backlight compensation)

• Auto-iris or Electronic Shutter (EE-AI). Select EE for automatic shutter control, when using fixed-iris lenses. Select AI when using auto-iris lenses.

• AGC On/Off. Automatic Gain Control to improve performances under low-light conditions.

• AWB On/Off. Automatic white balance.

Cabling and installation
RETBC5 camera can be directly connected to TV/monitor through an A/V cable. 12VDC power is supplied by an REAL4S 220VAC/12VDC adapter (sold separately). If you want to control many cameras you can use a Switcher, Quad or Multiplexer. Last generation Stand-alone Digital Video Recorders don't need any additional devices to control the cameras, that can be directly connected to the DVR inputs. Connecting the camera to an Wireless Transmitter, you can build your own Wireless CCTV system.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Don't forget to order the REAL4S Power Supply, the REST1 Support bracket and the Lenses. If the video cable has an RCA connector you'll need an REBNCRCA1 Adapter.

Applications
This camera is based on the fantastic Sony EXview HAD CCD sensor, the only one that's able to allow both high-resolution and very high sensitivity for night vision. The high-resolution of the sensor means more defined images on the monitor, reachness of details and sharp contours. RETCC5 is a color camera with Day & Night function. This function allows to take color shots under good illumination conditions (up to 0.1 Lux) while "transforming" in B/W in low-light conditions (up to 0.001 Lux). During B/W operations, RETCC5 can be used together with Infrared Illuminators, for shots under complete darkness. The camera is supplied complete of built-in microphone for Audio reception and it's compatible with all NicoShop Lenses.

On the camera rear there are some micro-switches, to optimize images under different environmental conditions, to take advantage of the DSP digital control:

• BLC On/Off (Backlight compensation)

• Auto-iris or Electronic Shutter (EE-AI). Select EE for automatic shutter control, when using fixed-iris lenses. Select AI when using auto-iris lenses.

• AGC On/Off. Automatic Gain Control to improve performances under low-light conditions.

• AWB On/Off. Automatic white balance.

Cabling and installation
RETCC5 camera can be directly connected to TV/monitor through an A/V cable. 12VDC power is supplied by an REAL4S 220VAC/12VDC adapter (sold separately). If you want to control many cameras you can use a Switcher, Quad or Multiplexer. Last generation Stand-alone Digital Video Recorders don't need any additional devices to control the cameras, that can be directly connected to the DVR inputs. Connecting the camera to an Wireless Transmitter, you can build your own Wireless CCTV system.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Don't forget to order the REAL4S Power Supply, the REST1 Support bracket and the Lenses. If the video cable has an RCA connector you'll need an REBNCRCA1 Adapter.

Applications
RETBC6 wired camera can be used for professional Video surveillance applications. It can be connected, through A/V cable, directly to TV/monitor or can be integrated in a wireless system using Wireless Transmitters. This B/W camera is very useful for shots in low-light conditions and environments (even in the dark by using Infrared Illuminators).
The camera is compatible with all the range of NSH Lenses. RETBC6 mounts a Samsung CCD sensor, that guarantees very good images, reliability and duration. Last generation DSP digital electronics guarantees an extraordinary fidelity of colors and an S/N ratio more than 48 dB, warranty of clear crisp images.

On the camera rear there are some micro-switches, to optimize images under different environmental conditions, to take advantage of the DSP digital control:

• BLC On/Off (Backlight compensation)

• Auto-iris or Electronic Shutter (EE-AI). Select EE for automatic shutter control, when using fixed-iris lenses. Select AI when using auto-iris lenses.

Cabling and installation
RETBC6 camera can be directly connected to TV/monitor through an A/V cable. 12VDC power is supplied by an REAL4S 220VAC/12VDC adapter (sold separately). If you want to control many cameras you can use a Switcher, Quad or Multiplexer. Last generation Stand-alone Digital Video Recorders don't need any additional devices to control the cameras, that can be directly connected to the DVR inputs. Connecting the camera to an Wireless Transmitter, you can build your own Wireless CCTV system.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Don't forget to order the REAL4S Power Supply, the REST1 Support bracket and the Lenses. If the video cable has an RCA connector you'll need an REBNCRCA1 Adapter.

Applications
RETCC6 wired camera can be used for professional Video surveillance applications. It can be connected, through A/V cable, directly to TV/monitor or can be integrated in a wireless system using Wireless Transmitters. This color camera needs more environmental brightness than a B/W camera, but offers a more realistic image.
The camera is compatible with all the range of NSH Lenses. RETCC6 mounts an Sharp CCD sensor, that guarantees very good images, reliability and duration. Last generation DSP digital electronics guarantees an extraordinary fidelity of colors and an S/N ratio more than 48 dB, warranty of clear crisp images.

On the camera rear there are some micro-switches, to optimize images under different environmental conditions, to take advantage of the DSP digital control:

• BLC On/Off (Backlight compensation)

• Auto-iris or Electronic Shutter (EE-AI). Select EE for automatic shutter control, when using fixed-iris lenses. Select AI when using auto-iris lenses.

Cabling and installation
RETCC6 camera can be directly connected to TV/monitor through an A/V cable. 12VDC power is supplied by an REAL4S 220VAC/12VDC adapter (sold separately). If you want to control many cameras you can use a Switcher, Quad or Multiplexer. Last generation Stand-alone Digital Video Recorders don't need any additional devices to control the cameras, that can be directly connected to the DVR inputs. Connecting the camera to an Wireless Transmitter, you can build your own Wireless CCTV system.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Don't forget to order the REAL4S Power Supply, the REST1 Support bracket and the Lenses. If the video cable has an RCA connector you'll need an REBNCRCA1 Adapter.

Applications
There are several reasons to choose the RETCC7 zoom camera. Of course this camera is the right choice if zooming towards the target is required. Moreover, this camera is ideal for all the applications requiring  a state of the art fixed camera, able to provide the best image quality and the most accurate settings.
RETCC7 features the outstanding Sony Ex-View CCD, the only one of its kind which combines high resolution with powerful night vision. 520 lines ultra-high resolution and superior Digital Signal Processing makes this camera the best choice for the most demanding CCTV systems.

520 TV lines ultra-high resolution
The image from a standard colour camera is usually made by 330 vertical lines. The image delivered by RETCC7 is made by 520 vertical lines.
The high resolution of the CCD translates into images with much higher definition, greater detail and clear, sharp outlines.

Day/Night function
RETCC7 is a colour camera with Day & Night function. This enables it to film in colour when there is good light (up to 0.1 Lux), and then switch to black/white when darkness falls, continuing to film down to a minimum illumination of only 0.005 Lux.
In B/W mode, RETCC7 is also compatible for use with infrared illuminators, enabling it to film in total darkness.

The camera
These cameras feature the outstanding high resolution Sony ExView CCD, the only CCD capable of filming in extremely dim light
The camera boasts high end DSP digital electronics which guarantees an S/N ratio over 52 dB, a level of signal purity which is higher than most cameras on the market, delivering the upmost clarity of images produced by its prestigious detection system.

Zoom lens
RETCC7 camera is supplied with a built-in zoom lens. This motor zoom, featuring 3.9 to 85.8 mm. focal length, provides 22x optical zoom. In addition, the camera includes 10x digital zoom.
Zoom and focus can be controlled in 3 different ways:
Built-in keypad control - Zoom/Focus/Configuration can be controlled manually by means of 5 pushbuttons on the back of the camera.
12VDC remote control - Zoom/Focus can be controlled by applying 12VDC to LC1/LC2 terminals. 12VDC control is ideal when the application requires an external equipment to control the camera. The RECZ2 controller is suitable to move the zoom of this camera as well as a Pan Tilt Unit.
RS485 remote control - Zoom/Focus/Configuration can be controlled via twisted pair RS485 serial BUS using SDCON1 keypad for speed dome cameras (PelcoD 2400 bps protocol).
The serial BUS allows a single keypad to control up to 64 cameras individually. Camera ID can be set in the configuration menu.
A few digital videorecorders like DR2000 or huperLab DVR cards can directly control zoom cameras via RS485 BUS. The remote control software of the DVR's allows controlling the RETCC7 zoom over an IP network (LAN) or via Internet.

22x optical zoom 3.9 to 85.8 mm varifocal length 10x digital zoom	Rear panel OSD pushbuttons, BNC video output, 12VDC power supply, LC1/LC2 12VDC zoom control, DATA+/- RS485 zoom control.

Using the camera without zoom remote control
RETCC7 can be an optimal choice even in some applications that do not require zooming. For example this camera could be used by all customers that require a high-end autofocus camera even if they do not actually need to control the zoom from remote. In such applications the focal length of the lens can be set manually in order to obtain the best angle of view that will not be modified in operation. This zoom level can be set as a start-up preset, so the camera will be able to restore the original position even after power failure.

Autofocus-Autoiris
Unlike all NSH cameras with CS separate lens, RETCC7 camera has autofocus feature that automatically adjust the focus according to the zoom level and the target distance.
In the settings menu it is possible to choose between adjustable autoiris lens and electronic shutter.

Removable IR filter (ICR)
All color cameras have an IR cutfilter in front of the CCD in order to reduce the infrared light which is always present in natural  daylight. Without IR cutfilter, the colors would be unnatural, very different from those we expect.
RETCC7 cameras feature the latest ICR technology (IR Cut Removable Filter) for better image quality both in natural light and with infrared. The IR filter, indispensable during the day, automatically cuts out in darkness, ensuring greater luminosity when filming with the IR illuminator as well as true colors with day light, particularly in low light condition.

Digital Slow Shutter (DSS)
Digital Slow Shutter is a special feature that provides extraordinary low-light performance.
Using DSS, RETCC7 camera is able to integrate several frames into a single one, dramatically increasing the light level of an almost dark video. Integration level can be set from 0 to 36 frames. Please note that high integration level, will provide high low lux performance, but low refresh rate of the video.

Advanced Back Light Compensation (BLC)
Back Light Compensation improve the camera performance when filming a dark target on a bright background.
RETCC7 provides a latest generation, advanced BLC feature with selectable BLC target area (48 image blocks).

Privacy masking areas
This function is used to prevent critical areas to be filmed by the camera, normally for protecting people's privacy.
Up to 4 privacy masks can be set. The size of the masks can be automatically resized according to the zoom control.

Text on video
RETCC7 cameras can over print the name of the camera on the video, as well as the zoom level.

Mirror function
Mirror function is used to rotate the image upside down vertically or horizontally. Cameras filming backwards, generally need this option to be set to ON.

Audio
RETCC7 cameras do not come with a built-in microphone. If you require audio, you can connect an external microphone which is easily fitted between the camera and the Audio/Video connector cable.

Cabling and installation
These cameras can be directly connected to a TV or monitor using a cable. You can use the ready-to-use 20 m cable RECT1 (video+audio+power), or for longer distances coaxial cables such as CVRG59 in rolls of 100 m.
The camera takes a 12 VDC power supply. To convert 220V mains power into 12 V, a min. 500 mA 220VAC/12VDC adaptor such as REAL4S is used.
We also supply brackets for wall-mounting and protective housings. If you need to control more than one camera you can connect them to a switcher or quad splitter.
If you wish to use a video recorder, the modern digital video recorders do not require these control devices and the camera can be directly connected to the video input sockets.
If the camera is connected to an external transmitter like RETX2/3/48/5, it can be integrated into a wireless system.
The zoom of the camera can be controlled from remote. You can do that by using 2 simple wires and a 12VDC controllers like RECZ2. Alternatively an RS485 keypad for speed domes, like SDCON1 can be used to manage up to 64 among RETCC7 and speed domes camera over a twisted pair. RS-485 zoom control can be also performed by means of DR2000 DVR's and huperLab DVR cards.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Applications
Applications
Watec wired camera with extraordinary technical features, high resolution and super high sensitivity enclosed in a very small case, allows mounting many types of lenses depending on the installation needs. Up to 2.5 times more sensible in the field of visible light wavelength. Up to 3 times more sensible in the field of infrared light wavelength. Increased signal amplification for a better S/N ratio. Very good visibility under low-light conditions.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Applications
Protected case
This camera, protected in an aluminum IP55 cylinder, is the best solution for surveillance of irksome sites, where a normal camera could be rapidly ruined from humidity, bad weather conditions, dusts or mechanical shocks. The camera is enclosed in an Aluminium case totally weatherproof, with IP55 grade of protection, protected from the penetration of dust and liquids. For this reason it might be used, without any protection, in sites like:

• Utensil machinery

• Workshops

• Industrial sites

• Outdoor sites totally exposed to weather

• Outdoor sites with high saline concentration

The camera
The camera can be connected directly to a TV or monitor using a video cable (purchasable separately) or it can be connected to a video transmitter to implement a wireless system. the camera has an DSP digital electronics that let it be an high-performance camera with an optimal quality/price ratio. The resolution is 380 lines. To better adjust to any light condition these cameras have a fast automatic diaphragm from 1/50 sec to 1/100.000 sec. The camera is available in color or B/W.

The lens
The camera is factory-set, due to its small dimensions, with an S socket for mini-lenses, factory-built with an RE036S mini-lens that gives an angle of view of 67° for B/W model and 53° for color model. The cameras are also compatible with all mini-lenses but RE025S and RE250S models. It is possible to order the camera without the lens mounted and another lens to order apart. To evaluate the angle of view of the lens you must consider that the REBBC2 B/W camera uses a CCD 1/3" sensor, while the color REBCC4 model a CCD 1/4" sensor.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Don't forget to order an REAL4S Power Supply.

Applications
The Automatic Number Plate Recognition (ANPR) is needed by several CCTV applications: from company access control to petrol station surveillance. The clear recognition of car's license plate can add a great value to CCTV video-recording systems. State-of-the-art technologies make REBCC7Y the best number plate recognition camera on the market today.

Automatic number plate recognition
Reading a vehicle number plate is a too difficult job for a standard CCTV camera. The main problem is the exposure caused by headlight at night, but even during the day the light reflection on the number plate can make the number recognition virtually impossible. REBCC7Y is a special camera, which has been specifically designed for ANPR systems.

Extra light compensation
To avoid exposure caused by headlights, REBCC7Y compensates the light coming from the vehicle with infrared light generated by built-in IR LED's. The camera comes with 2 CSD light sensors: one on the front, towards the vehicle, and the other on the back, sensing the effective light of the environment. When fixing the camera, please be sure the back light sensor is not covered by obstacles.

Infrared Cut-filter Removable (IRC) and Visible light Cut-filter
All NSH long-range IR cameras do include the ICR function (Infared Cut-filter Removable), a mechanical system which removes the IR cut-filter at night and enhances the camera sensitivity to the IR illumination. Besides the IRC function, REBCC7Y does much more then removing the IR cut-filter at night. This camera can replace the IR cut-filter with a visible light cut-filter, able to inhibit strong visible light from headlights to reach the CCD of the camera. During night view, this avoids exposure caused by car's headlights. The final result is a clear and precise shot of the car's plate, both with headlights switched On/Off.

High resolution camera, Infrared illuminator and Lens
REBCC7Y camera has been designed using the best CCTV components available today. Sony SuperHAD CCD, 550 TV lines extra high resolution, DSP chip with S/N ratio over 52 dB. REBCC7Y camera comes with a built-in infrared illuminator with 12 maxi LED's. The camera has a Day/Night function and is able to function in all conditions, including under complete darkness. This camera delivers colour images during the day. When the darkness comes, the illuminator goes on automatically and B/W images are delivered. The camera is supplied with a 16 mm lens. The product has been optimised for use with this lens, that cannot be changed.
ATTENTION. The REBCC7Y IR illuminator is specifically designed for number plate illumination and cannot illuminate the rest of the scene which will not be visible as shown in the sample images. For a general night view, you can install any of our standard IR cameras which do not affect the number plate reading function of the REBCC7Y camera.

Under full beam headlights	Under dipped beam headlights
Under no headlights

Optimum viewing distance
REBCC7Y camera has been focused for number plate recognition at approximately 10 metres distance from the lens. It is recommended to install the camera in order to respect the optimal distance from the target, because this will provide the best possible performance. Anyway, number plate recognition will still be possible even at longer or shorter distances from the camera.

Vehicle's speed
REBCC7Y cameras have been designed for use with normal CCTV systems (recording 25 f/sec) and therefore cannot read number plates if the vehicles are moving at high speed. The camera must be placed closed to access gates or barriers, so that the vehicles are forced to stop or lower the speed.

Waterproof housing and Audio
The camera is inside a robust, completely waterproof aluminium case which guarantees an IP67 protection level, meaning that the camera can be exposed to rain without a dropping water inside it. Due to their use, waterproof cameras don't come with a microphone. If you need audio, you can connect an external microphone which can be easily fitted between the camera and the Audio/Video connector cable.

Wiring
The camera can be connected directly to a TV or monitor by means of an audio/video cable (Audio OUT and Video OUT). On the back of the case there is a waterproof conduit bearing a 1 m cable which contains: wiring for the 12VDC power supply (terminal board with 2 positions) and video cable (BNC female). It's possible to use an REAL5 regulated 220VAC / 12VDC power supply (not included). To connect the camera to an extra monitor or TV you will need to use RG59 coaxial cable. By connecting the camera to an external Transmitter, it can be integrated into an NSH® wireless system.

Download the content by clicking on the title. If you've not installed Adobe Reader, please click on the logo below.

Applications
REBCC6L is supplied with an IP67 waterproof aluminium case, and it's the ideal solution for Video surveillance of critical environments, where a standard camera would be damaged by moisture, rain, dust or mechanical shocks. REBCC6L has an IP67 Protection Grade, this means that it is totally protected against dust and water. Therefore, it doesn't need protective housings and can be used in critical environments, like:

• Outdoor environments completely exposed to the weather

• Outdoor environments with high saline concentrations

• Aboard of operative machinery

• Industrial environments, workshops

• Aboard of boats

Camera
REBCC6L has a modern design and a pleasant aesthetics that make it suitable to be installed in any indoor and outdoor environment. The camera uses the fascinating Sony SuperHAD(TM) CCD color sensor, unbeatable in terms of lightness and quality. DSP digital electronics guarantees an excellent Signal/Noise ratio, higher than 48 dB. The Sony CCD sensor has an high resolution of 420 TV lines.
To better adjust to any light condition, even outdoors, this camera has a built-in technologically advanced electronics Iris (with an high-speed of up to 1/100,000 second) that's very useful in outdoor installations, without the need of using Auto-Iris optics.
The camera includes the Day/Night function that allows filming under any condition, even in total darkness. Like all Day/Night cameras, REBCC6L provides color images during daylight. At darkness, the Infrared illuminator activates automatically and the camera goes Black/White.

Lens
REBCC6L has a built-in Mini-lens with 3.6 mm focal length RE036S. Nevertheless, you might order the camera without lens, ordering it apart (pls. see the Lens Table). REBCC6L is compat