|
Home automation > X-10 Wall switch
Since 2002, 
is Authorized  Distributor.
We offer the complete product range for Domotica, Home Automation & Security, Video surveillance & Multimedia.
 Download the X-10 Products, to discover their key features and find many new operating ideas. English version (1.73
MB).
Download the X-10 Transmission. English version (616 KB).
|
HAU-SWT-LW11 |
|
Marmitek Wall dimmer LW11 (X-10 Wall switch)
Replaces any normal dimmer for X10 control of lighting
 
Applications
The X10 wall mounted dimmer is a 500W receiver module that is controlled by any X10 controller. It can be used like an ordinary dimmer and can be also controlled by external momentary action switches connected to its terminal 2. The LW11 responds to standard X10 commands like: "ALL LIGHTS ON", "ALL UNITS OFF" sent by any X10 controller set to its "House Code" regardless of the "Unit Code", or individual unit control by "ON", "OFF", "BRIGHT", "DIM" commands. Combined with the memory dim feature, the LW11 can change the room lighting instantly or progressively. The unit is currently supplied with 1 cover plates and 1 mounting frame. This unit is used for scene lighting, typically in living rooms, dining rooms and study/reading rooms. The ideal light intensity can be pre-programmed in your controller or Computer Interface CM11.
Download the Multilingual Manual of this product.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 59,95
Technical info:
Replaces any normal dimmer for X10 lighting control, rated between 60W and 500W Works with X10 controllers and momentary action wall switches Can also be used as an ordinary dimmer Remembers its light level for smooth dimming
Availability:
in stock |
|
HAU-SWT-SS13 |
|
Marmitek Slimline wireless RF wall switch SS13E (X-10 Wall switch)
Add wall switches anywhere, without running wires!
Have you ever wanted a light switch in a certain location, without to rip a hole in a wall and connect electrical wires?
Applications
Now you can, with this slimline wireless remote wall switch that can be mounted to any surface! Easy single pushbutton programming has this remote wall switch set for each button to control a different lamp or appliance. It's only 7 millimeters thin! You can also use it as a portable 4-button wireless remote.
Press button left side to turn On, right side to turn Off modules set to "Unit Code" "1", "2", "3" on "House Code" "A" (default setting) Press and hold 4th button left side to brighten or right side to dim
Micro thin! Only 7 millimeters! Completely indistinguishable from an ordinary wall plate! Single pushbutton
programmability! 3 on/off buttons PLUS 4th button dimmer control! Adheres to any surface! Mount it anywhere to have the perfect wall switch right where you've always wanted -- no wiring! Or use it as a portable 4- button wireless remote! Fits comfortably in the palm of your hand; slim and sleek, it glides effortlessly into your pocket for control on the go!
Download the Multilingual Manual of this product.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 34,95
Note: the slimline wireless RF wall switch requires to work any X10 Transceiver (i.e. TM13).
Availability:
5 business days |
|
HAU-SWT-SW10 |
|
Marmitek Shutter Switch SW10 (X-10 Wall switch)
Automated control of curtains, blinds etc.
 
Applications
The Shutter Switch SW10 is used to remotely or automatically control blinds, curtains, sun blinds or roll-down shutters. When installed the Shutter Switch learns the height of the window and store this information in its memory. The Shutter Switch is controlled manually, remotely or automatically with X10 Controllers. Make your house look "lived-in" when you're away with presence simulation of your shutters or curtains.
Download the Multilingual Manual of this product.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 64,95
Technical info:
Supply voltage: 230 V +10% -15% 50Hz Power Consumption: <1W. Making Capacity: 6 A - 250 VAC (motors) Signal Sensitivity: 50 m V pp min. at 120 kHz Connections: screw type terminals for phase, neutral, motor forward and motor reverse
Availability:
5 business days |
|
HAU-SWT-MPL1 |
|
MPL1 Shutter Module (X-10 Wall switch)
Suitable for switching 2 motorized (230V) shutters/blinds/curtains.
Motorized window coverings are an important addition to any automated home. The extra security benefits, energy efficiency, and UV protection they offer are of great value to anyone that owns a home. This technology allows any homeowner the ability to operate their window coverings at the touch of a button or via computer.
Features
Make your house look "lived-in" when you are away with presence simulation of your shutters or curtains. Having your blinds operating while you are away will make people believe that someone is home even though you are not. Security is a very real concern and peace of mind is so important in this day and age. When going out, one button can control all shutters. During the daylight hours, you can automatically close the shutters to protect the rooms and their furniture from sunlight. You can program your own macros with help of the CM11 Computer interface.
Applications
The MPL1 module enables to receive X-10 signals, acting over two motors in an independent way. Moreover, the MPL1 has the right connections to control the motorized elements by means of momentary switches. When the MPL1 has the power supply connected, its LED will flicker with 2 seconds frequency. This will indicate it is in the operative mode. At this state, the MPL1 can be controlled by ON/OFF X-10 signals. When the MPL1 receives an ON X-10 signal, it carries out an UP movement of the element connected. When the MPL1 receives an OFF X-10 signal, it carries out a DOWN movement. The MPL1 can also be controlled by momentary switches. The module has been designed with micro-switches in order to provide an easy installation and testing, it is possible to use any type of momentary switch "normally opened". Each motor is controlled by a momentary switch. The MPL1 carries out a different sequence depending on duration of the press.
Short Press: The execution order will change at each short press. The sequence is: UP-STOP-DOWN-STOP. Long Press: By a long press the movement will be the opposite of the one before. The movement will stop as soon as the momentary switch is not pressed.
IMPORTANT: Due to almost all the 230V motors have their own limit switch; the MPL1 does not oversee the limit switch. Due to that reason, it must be exclusively used with motor which possess such characteristic. Thus, in order to allow any motor to arrive to the end of the distance, the MPL1 keeps the power supply during 1 minute. Once passed this time, the MPL1 will disconnect the power supply to the phase.
EUR 174,00
Technical info
Power Supply: 230Vac, 50Hz Power: < 1.8W Maximum Output Current: 5 A Fuses: 5x20, 220Vac, 6,3A temporised. Sensibility of the X-10 signal: 30mVpp Ambient temperature: 0-45° C Relative Humidity: 90% not condensed Dimensions: 120x75x42mm (LxWxD) It requires Ground Protection
Availability:
in stock |
|
HAU-SWT-ADDAMOTOR80 |
|
Add-A-Motor 80 (X-10 Wall switch)
Adds motorization to new and existing draperies, vertical blinds and many shades.
Features
No drilling, no electrical work. No modification to window covering. Easy installation. Helps elderly and disabled. Add-a-Motor 80 fits all drapery and vertical blinds, and many shades. Simply remove tension pulley or other device on the window covering cord or chain. Motor attaches to loop end of cord or chain. Add-a-Motor 80 resolves child safety problem related to exposed cords and chains Two adjustable stop positions
Applications
Adds motorization to all new and existing draperies and vertical blinds, and many shades. Attaches to the window covering without modification. Fits all cords and bead-chains with loop-ends, and many split cords and chains. A simple dial allows you to adjust motor so it will automatically stop at the open and closed position that you prefer. Examples: Full open, closed, or any in-between. Can traverse draperies up to 60 pounds and 12 feet wide. Can traverse, or rotate vertical blinds.
Can lift and lower large shades. Plug-in ready, with compact size that conceals behind fabric or furniture. Compatible with most lamp timer-switches. Compatible with IBM Home Director, Honeywell Home Controller, and all other X-10 home automation systems. Simply plug the AC-DC Adapter into an X-10 appliance module or controlled wall outlet. Then you can open and close your window covering using compatible wall switch, timer, remote control including TV remote, and your home computer. The system only works with continuous drapery cords. Split cords can often be reconnected and made compatible with Add-A-Motor 80.
Motor specifications
Drapery
Up to 60 pounds of fabric. Traverse up to 12 feet in one direction, over 20 feet center open.
Vertical Blinds
Traverse vertical blinds the same as drapery; or, attach to chain to rotate vertical blinds.
Shades
Lift and lower shades up to 25-square feet. Example: Shade 5-feet wide by 5-feet long, 6 by 4, etc.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 119,00
WARNING: The AC-DC Adapter is NOT included.
The required Adapter description is:
Plug-in, Class 2 transformer. Output Voltage: Any between 12VDC and 15VDC. Output Current: Any between 600mA and 1 Amp. Output Plug: Center-Positive barrel type, 5.5mm OD, 2.5mm ID.
 Don't forget to order the 220VAC/12VDC 1000mA Power Supply.
Availability:
5 business days |
|
