|
Home automation > X-10 Professional
Since 2002, 
is Authorized  Distributor.
We offer the complete product range for Domotica, Home Automation & Security, Video surveillance & Multimedia.
 Download the X-10 Products, to discover their key features and find many new operating ideas. English version (1.73
MB).
Download the X-10 Transmission. English version (616 KB).
|
HAU-PRO-AD10 |
|
Marmitek DIN-Rail Switch AD10 (X-10 Professional)
Professional control of your appliances!
Applications
The X-10 DIN rail switch is a remote controlled relay. Discretly installed at the junction box, it switches hard-wired circuits with several switches (e.g. hallway lighting). The internal relay can be tripped either by external latched or momentary action wall switches or by an X-10 controller. The Din Rail Switch (AD10) responds to "standard" X-10 that is: "all units off" from any X-10 controller set to its house code regardless of unit code or alternatively individual unit control by "ON" and "OFF". When the relay is energized, the LED above the slide switch is illuminated. Professional installation recommended.
Slide Switch:
Position 0: the connected load is switched off permanently and cannot be switched on by the wall switches or an X-10 controller.
Position 1: the connected load is switched on permanently and cannot be switched off by the wall switches or an X-10
controller.
Position auto: the connected load can be switched by the wall switches or an X-10 controller.
Terminal 1 is designed for toggle switches: the relay picks up when phase is present and releases when there is no voltage at the terminal.
Terminal 2 is designed for pulse contacts: each time phase is applied the relay switches. Installation made by professionals is recommended.
Download the Multilingual Manual of this product.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 39,95
Technical info:
Supply voltage: 230 V Making capacity:
2000 W (incandescent lights)
3 A (motors)
16 A (resistive loads) Connections: screw type terminals for phase, neutral, switched phase, control 1 and 2.
Availability:
5 business days |
|
HAU-PRO-LD11 |
|
Marmitek DIN-Rail Dimmer LD11 (X-10 Professional)
DIN module for dimming of your lights!
 
Applications
The X10 DIN rail dimmer (LD11) is a 700 W receiver module that serves as remote controlled dimmer. Mounted on the DIN rail in the mains distribution box, it dims/switches hard-wired circuits with several wall switches (e.g. living room lighting). It is designed to operate with 230V and 12V lighting including halogen lamps. The LD11 can be turned on/off, and brightened/dimmed either by an X-10 controller or by external momentary action switches connected to terminal 2 - maximum connected cable length is 30 metres.
The LD11 responds to "standard" X10 commands like: "ALL LIGHTS ON" or "ALL UNITS OFF" from any X10 controller set to its "House Code" regardless of the "Unit Code" or alternatively individual unit control by "ON", "OFF", "BRIGHT" and "DIM". The LD11 also responds to "professional X-10". Combined with the memory dim feature, the LD11 can change the room lighting instantly or progressively.
This unit is especially designed for scene lighting where very often the lighting is 12V halogen, commonly used in living
room, study/reading rooms. The unit can be installed in sub-junction boxes for discrete control. Installation made by professionals is recommended.
Download the Multilingual Manual of this product.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 39,95
Technical info:
Supply voltage: 230 V +10% -15% 50 Hz Supply current : 20 mA capacitive Making capacity: 40 to 700 W (incandescent lamps only) Regulating time: 3,5 sec +/- 0,2sec from fully on to off Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz Input impedance: 60 W (L - N) at 120 kHz Fuse: 2,5 A (T) Connections: screw type terminals for phase, neutral, switched phase, control 2.
Availability:
5 business days |
|
HAU-PRO-FD10 |
|
Marmitek DIN Filter/ Coupler FD10 (X-10 Professional)
X-10 Filter and Phase Coupler!
 
Applications
The signal transmission of high frequency pulses via the mains network can be affected by active or passive interferences. When used correctly, the filter/phase coupler will extensively suppress these interferences. Typical active interference sources are appliances that do not dispose of a regular interference suppression according to the norms, as well as wireless intercommunication systems which use mains borne signaling, as they transmit high frequency signal resp, interferences into the mains network. These disturbances are usually carried into the house network from outside, e.g. from neighbours or industrial installations. They are suppressed by the filter/phase coupler. Remaining interferences generated within the house network are without significance as the special dynamic filtering techniques of the X-10 system ensure undisturbed performance.
The FD10 also include the ability to couple X-10 signals across phases. For installation with three phases, use three FD10 filters and couples the filters by connecting their terminals K to the next phase, respectively. Installation made by professionals is recommended.
Download the Multilingual Manual of this product.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 49,95
Technical info:
Installed at the breaker panel/fuse box. Supply voltage: 230 V +10% -15% 50 Hz Maximum current: 63 A Filter frequency: 120 Khz Filter bandwidth: 5 Khz min. (3 dB points) Forward attenuation: 20 dB min. at zero current 15 dB min. at 63 A Reverse attenuation: 15 dB min Coupling loss: 2 dB max. at 120 Khz
Availability:
5 business days |
|
HAU-PRO-CAT3000 |
|
Marmitek CAT3000 Active Repeater (X-10 Professional)
Repeats X-10 powerline carrier transmission signals on all phases.
Applications
The Marmitek CAT3000 repeats X-10 powerline carrier transmission signals on all three phases of a 230V/400V 50Hz system. In a 3-phase system the CAT3000 receives all X-10 signals on one of the three phases and then copies and repeats them on the other two; in a 1-phase system the CAT3000 is used to boost the signal when it's been attenuated by over 100-200 metres distance between transmitters and receivers. In this case the X-10 signal will be amplified and resent back to the original phase. Installation made by professionals is recommended.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 599,00
Technical info:
Repeats both the signals from MicroModules as well as regular Marmitek X10 transmitters. Pre installed in IP54 plastic cabinet: designed to install in the main distribution box. Status LED’s on cover. Can also be used as signal repeater in a one phase installation. Calculates signals on 2nd and 3rd phase from the 1 phase compatible signals of MicroModules. Repeats the 3 phase compatible signals of regular Marmitek X-10 transmitters. Two way mode and fuse protected.
Availability:
5 business days |
|
HAU-PRO-TF678 |
|
Signal Blocker TF678 250A (X-10 Professional)
Blocks X-10 signals from entering home and couples them across phases.
Applications
The Signal Blocker makes a barrier to unwanted X10 signals and noises from entering or leaving your house, causing interferences with your own X10 signals.
This unit tests the neutral wire feed entering the house. It senses the presence of X10 signals and generates an opposite offsetting voltage signal to nullify it. At the same time it acts as a passive (unamplified) signal coupler to allow X10 signals to travel between phases within the home. Professional installation recommended. Ideal for apartments and X10 systems close to each another, that may cause interferences. Installation made by professionals is recommended.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 150,00
Availability:
in stock
|
|
HAU-PRO-X10TEST |
|
X10 Signal strength indicator set (X-10 Professional)
Test the strength of X-10 signals!
Features
Applications
It sends a constant P1 ON/OFF X-10 signal at a constant output voltage and then measures the voltage of this signal in a different location. Plug the signal strength indicator into a wall outlet and send an X-10 command. The tester will tell you the quality of the X-10 signal between the 2 locations. You can choose between 5 signal strength levels. With this device you can also test for high-frequency noise affecting the X-10 signal, eventually being neutralized by installing Filters. Professional use recommended.
Download the content by clicking on the title.
If you've not installed Adobe Reader, please click on the logo below.
EUR 240,00
Availability:
imported upon request
|
|
HAU-PRO-PRU256 |
|
PRU256 Programmer/ Controller (X-10 Professional)
Sends and receives standard and extended X10 commands.
Features
Programming tool for Marmitek MicroModules Display signal strength on line from other transmitters and two way receivers Use to test potential installation sites for possible installation problems Pinpoint loads to be filtered by logging power grid noise levels (user defined time periods up to 24 hours)
Applications
The PRU256 Programmer/logger is able to send and receive both standard and extended X10 commands. The PRU256 keypad enable the selection of transmission signal levels, single or continuous signal transmission, user selection of zero crossing degree shift and display on the LCD display the level of noise and signal on the power line.
EUR 699,00
Availability:
5 business days
|
|
