Applications

Remotely watch and listen with the D-Link SECURICAM Network(TM) DCS-5300G Internet Security Camera. The DCS-5300G is a fully-featured surveillance system that connects to an Ethernet or wireless broadband network to provide remote high-quality video and audio. Using the latest 802.11g wireless technology, the DCS-5300G securely communicates at a maximum wireless signal of up to 54Mbps.

You can safely access and control the DCS-5300G using Internet Explorer version 6. Watch and listen remotely as the DCS-5300G captures both sound and video of your site. The DCS-5300G Wireless Security Camera uses a CCD sensor that provides sharp and clear video with lifelike color representation.

The DCS-5300G Wireless Security Camera has a pan, tilt, and zoom function that can be controlled from the Web interface or from the included remote control. Pan the security camera up to 270 degrees horizontally and tilt it up to 90 degrees vertically. The pan/tilt speed can be adjusted to your preference. 4x digital zoom lets you remotely zoom in on all the action for close-up viewing.

The DCS-5300G adheres to the Universal Plug & Play UPnP(TM) specification which allows computers running Windows® XP/Me to automatically recognize the DCS-5300G and add it to your network. The DCS-5300G Wireless Security Camera can be accessed and viewed from "My Network Places" as a device on the network.

By signing up with one of the many free Dynamic DNS services available on the Web, you can assign an easy-to-remember name and domain to the camera (e.g. www.mycamera.myddns.com). This allows you to remotely access your security camera without having to remember the IP address, even if it has been changed by your Internet Service Provider.

Everything needed to get started is included with the DCS-5300G Wireless Security Camera. Simple installation procedures, along with the built-in Web-based interface offer easy integration into your network environment. Powerful surveillance software is included to enhance the monitoring and security management of the DCS-5300G. You can record high quality video to your hard drive using MPEG4 compression, playback video, monitor as many as 16 cameras on a single screen, and set up motion detection to trigger automatic recording and e-mail alerts. The DCS-5300G Wireless Security Camera is a cost-effective and versatile security solution for your home or business.

The DCS-5300G Wireless Security Camera comes with detachable antennas with reverse SMA connectors. By simply attaching a D-Link Wireless antenna, you can increase the wireless range of the DCS-5300G.

Applications

Remotely watch and listen with the D-Link Securicam Network(TM) DCS-5300W Internet Camera. The DCS-5300W is a powerful surveillance system that connects to a wired Ethernet or Enhanced 802.11b wireless network to provide high quality video and audio. The DCS-5300W provides advanced technology with DDNS and UPnP support.

From the Web browser you can view video from the DCS-5300W and manage the camera. The DCS-5300W comes with a CCD sensor that provides a sharp and clear image with life-like color representation. The built-in microphone monitors and records sound of your site. Record streaming video that utilizes high quality MPEG4 Compression to your hard drive.

The D-Link DCS-5300W also has a pan, tilt, and digital zoom function that can be controlled from the Web interface or from the included remote control. Auto pan mode enables the camera to move 270 degrees horizontally and the Patrol mode cycles through up to 20 preset positions. The pan/tilt speed can be adjusted to your preference. The built-in digital zoom lens enables the camera to obtain a closer view.

The bundled IP surveillance software further enhances the security features of the DCS-5300W, allowing you to archive streaming video to your hard drive, search and playback stored video, monitor as many as 16 cameras on a single screen, and set up motion detection to trigger automatic recording with e-mail alert notification.

The DCS-5300W Internet Camera maximizes your existing network investment using the latest Enhanced 802.11b wireless technology to communicate wirelessly with a maximum wireless signal rate of up to 22Mbps and 256-bit WEP security encryption.

By signing up with one of the many Dynamic DNS services, you can assign an easy-to-remember name and domain (e.g. www.mycamera.myddns.com). This allows you to remotely access your camera without having to remember the IP address, even if it has been changed by your Internet Service Provider.

The DCS-5300W is a full-featured wireless solution capable of meeting demanding security and home/ office monitoring needs. Secure your site with the D-Link Securicam DCS-5300W Internet Camera.

Applications

D-Link is pleased to introduce the D-Link SECURICAM Network DCS-950G Wireless Internet Camera, a full-featured surveillance system that connects to a broadband Ethernet or wireless network to provide remote high-quality audio and video. Using 802.11g wireless technology, the DCS-950G transfers video and audio wirelessly at up to 54Mbps.

You can access and control the DCS-950G Wireless Internet Camera using Internet Explorer version 6. As you watch and listen remotely to video and sound obtained by the DCS-950G, you can take snapshots or record directly from the Web browser to a local hard drive without installing any software, making it convenient to instantly capture any moment no matter where you are.

For more recording flexibility, you can configure the DCS-950G to record to network-attached storage (NAS), eliminating the need to set up a dedicated computer for storing recorded video.

With 0.5 lux light sensitivity, the DCS-950G Wireless Internet Camera is capable of capturing video in rooms with minimal lighting, making it ideal for use at night time.

The DCS-950G Wireless Internet Camera adheres to the Universal Plug & Play UPnP(TM) specification which allows computers running Windows® XP/Me to recognize the DCS-950G and automatically add it to the network. The DCS-950G can be accessed and viewed from "My Network Places" as a device on the network.

Securely connect the DCS-950G to a wireless network using WPA (Wi-Fi Protected Access), providing you a much higher level of security than has previously been available for Internet cameras. The DCS-950G also features a Site Survey tool, allowing users to easily find wireless networks within the range of the camera.

By signing up with one of the many free Dynamic DNS services available on the Web, you can assign an easy-to-remember name and domain to the camera (e.g. www.mycamera.myddns.com). This allows you to remotely access your camera without having to remember the IP address, even if it has been changed by your Internet Service Provider.

Everything needed to get started is included with the DCS-950G. Simple installation procedures, along with the built-in Web-based interface offer easy integration into your network environment. Powerful surveillance software is included to enhance the monitoring and management of the DCS-950G, allowing you to archive video straight to the hard drive, playback video, monitor up to four cameras on a single screen, and set up motion detection to trigger video/audio recording and send e-mail alerts. The DCS-950G is a cost-effective and versatile security solution for your home or business.

Applications

The DSL-504 uses ADSL (Asymmetric Digital Subscriber Line) technology to bring you Internet connection speeds up to 150 times faster than a 56K analog modem over a standard phone line.

Two computers can simultaneously connect to the DSL-504 to share its high-speed Internet connection. The DSL-504 can be connected to an Ethernet switch to allow more computers to share the Internet connection. With a simple to access web configuration interface, the DSL-504 can be managed by any computer on the network or even remotely with an Internet web browser.

The DSL-504 interface features G.dmt modulation for speeds of up to 8Mbps downstream and 640Kbps upstream.

G.lite is also supported, allowing 1.5Mbps downstream and 512Kbps upstream. The modem complies with G.dmt, G.lite, G.hs and T1.413 Issue 2 full-rate ADSL making it interoperable with a wide range of DSLAMs.

The DSL-504 supports Bridge RFC1483, Static IP, Dynamic IP, PPPoA, as well as PPPoE connections. IP Sharing is done through the use of Network Address Translation (NAT). NAT allows multiple computers to share an Internet connection with one public IP address, which eliminates the expense of having to purchase multiple Internet accounts.

The DSL-504 is easily upgradable in the field, making it future-proof for both end-users and service providers.

The DSL-504 is an ideal solution for your broadband needs, whether you're a home user who requires high-speed Internet access for faster web surfing and quicker downloads, or a small business that depends on the Internet to conduct daily business.

Built-in Switch with 4-ports 10/100Mbps
The DSL-504 has a 4-port switch 10/100Mbps NWay; each port has a dedicated bandwidth to connect to other devices or computers.

Applications

D-Link®, an industry pioneer in wireless networking, introduces a solution for businesses seeking to deploy and implement powerful and reliable Wireless LANs. D-Link unveils its new AirPremier DWL-3200AP 802.11g Managed Access Point, designed specifically for business-class environments such as large or enterprise corporations, to provide secure and manageable wireless LAN options for network administrators.

The DWL-3200AP Managed Access Point allows network administrators to deploy a highly manageable and extremely robust wireless network. This access point has two high-gain antennas for optimal wireless coverage. Enclosed in a plenum metal chassis, the DWL-3200AP adheres to strict fire codes and ensures complete safety. For advanced installations, this new high-speed Access Point has an integrated 802.3af Power over Ethernet (PoE) support to allow installation of this device in areas where power outlets are not readily available.

The DWL-3200AP delivers extremely reliable wireless performance with standard 802.11g wireless throughput rates of up to 54Mbps and has the added capability of reaching maximum wireless signal rates of up to 108Mbps powered by D-Link 108G technology. At the same time, the DWL-3200AP remains fully compatible with the IEEE 802.11b and 802.11g standards.

Since wireless security remains a strong concern among businesses, the DWL-3200AP provides the latest wireless security technologies by supporting both WPA-Enterprise and 802.1x to ensure complete network protection. In addition, the DWL-3200AP currently comes 802.11i-ready to fully support industrial grade wireless security. Other security features included in this Access Point are MAC Address Filtering, Wireless LAN segmentation, Disable SSID Broadcast, and support for Advanced Encryption Standard (AES) Encryption.

To maximize total return on investment, the DWL-3200AP can be configured in any one of three modes: Access Point, Wireless Distribution System (WDS), and WDS with AP Mode. WDS support allows the AP to provide network access to client devices and/or serve as the wireless network backbone. With WDS Support, network administrators have a wide selection of deployment options.

Network administrators can manage all the DWL-3200AP’s settings via its web-based configuration utility or with Telnet. For advanced network management, administrators can use D-Link’s AP Manager or D-View SNMP management module to configure and manage multiple access points from a single location. In addition to a streamlined management process, network administrators can also verify and conduct regular maintenance checks without wasting resources by sending personnel out to physically verify proper operation.

With integrated PoE support, extensive manageability, versatile operation modes, and solid security enhancements, the new D-Link AirPremier DWL-3200AP Wireless Access Point provides SMB environments with a business-class solution for deploying a wireless network in the workplace.

Applications

D-Link, the industry pioneer in wireless networking, offers a reliable high-performance wireless outdoor solution - The D-Link AirPremier DWL-2700AP Wireless Outdoor Access Point, capable of transfer rates with a maximum wireless signal rate of up to 54Mbps in any outdoor environment.

The DWL-2700AP is an ideal addition to business networks seeking to extend wireless signal coverage over outdoor real estate. Hotspot operators can use this rugged outdoor access point to support and deliver wireless connectivity to their customers - whether they are indoors, outdoors, on the terrace, or even on a boat in the middle of a lake. Another ideal deployment application includes bridging networks that are located in separate buildings.

Enclosed in die-cast watertight housing and equipped with a built-in heater with temperature sensor, the DWL-2700AP is designed to endure almost any outdoor condition. For advanced installations, this Access Point has an integrated 802.3af Power over Ethernet (PoE) port that allows you to install the device in areas where power outlets are not readily available.

In addition to easy installation, the DWL-2700AP can be configured to operate in any one of five modes: Access Point (AP), Point-to- Point (PtP) Bridge, Point-to-MultiPoint (PtMP) Bridge, Repeater, or Wireless Client. For compatibility with other D-Link networking devices, the DWL-2700AP uses Wireless Distribution System (WDS) technology when running in Repeater mode. The DWL-2700AP also supports both load balancing and redundancy, increasing total aggregate bandwidth while providing a failsafe response mechanism for your wireless network.

When used in any operation mode, the DWL-2700AP provides maximum security by supporting WEP Encryption (64/128/152-bit), 802.1x user authentication, and WPA. MAC Address Filtering, Wireless LAN segmentation, Disable SSID Broadcast, and support for AES (Advanced Encryption Standard) are just some of the other additional security features.

Network administrators can manage all the DWL-2700AP's settings via its Web-based configuration utility or with Telnet. For advanced network management, administrators can use D-Link's AP Manager or D-View SNMP management module to configure multiple access points from a single location.

With integrated PoE support, extensive manageability, versatile operation modes, and solid security enhancements all built into one sturdy box, the D-Link AirPremier DWL-2700AP Wireless Outdoor Access Point provides everything network administrators need to extend a wireless network to the outdoors.