Applications

There are numerous wireless cameras on the market, but while they do transmit to receivers wirelessly, they still need to be plugged in to an electrical outlet for power. But the 2.4GHz Solar Color PIR Camera & Receiver is a truly wireless camera, receiving all of its required energy from the sun. With no wires to run, this camera installs easily, providing security and convenience in a simple, economical manner.

When the camera's PIR motion sensor detects motion, images and voices are transmitted. Upon receiving these signals, the receiver beeps twice, and the LED flashes for one minute, so you'll know when to record or to view on your TV or monitor. The actual transmission time is adjustable for 10, 20, 30 or 40 seconds, but the camera will continue to transmit as long as the PIR sensor is triggered.

The 2.4GHz Solar Color PIR Camera's solar panel uses the sun's rays to run and maintain a charge to the camera battery during daylight hours. A negligible amount of energy is released by the long-life rechargeable battery to operate the camera at night. While the camera will work after sunset, it requires a minimum light of 3 Lux to capture images.

Mount the camera in any convenient location that gets ample direct sunlight. You can adjust the camera's view angle in any direction, and the PIR motion sensor will sense movement up to 26 feet away. Connect a time-lapse VCR (sold separately) for constant image capturing, ideal for when you're away from home.

Specifications
Camera:	Color CMOS
TV System:	PAL/NTSC
Sensitivity:	3 Lux @ F1.2
Lens Angle:	78° diagonal
Lens:	4.3mm F2.0
Camera Angle:	Left & right 90° +/- 5°, down 45°
Microphone:	Built in
Channels:	4
Transmitting Frequency:	2400 ~ 2483 MHz (for 4 channels, selectable)
Receiver Operating Frequency:	2400 ~ 2483 MHz (for 4 channels, selectable)
Power:	Camera: 6-volt rechargeable solar battery with 9-volt backup battery. Receiver: 12V DC 500mA AC adapter
Power Supply:	4.3" x 6.3" (110mm x 160mm) solar panel
Battery Life:	2 years
Camera Dwell Time Switch:	4 positions for 10s/20s/30s/40s
PIR Detection Distance:	26 feet (8m)
PIR Detection Angle:	90°
Transmission Range:	246 feet (75m) max.
Antenna Type:	Rod
Receiver Connections:	RJ-45 for VCR controller; DC jack; 3 RCA jacks
Dimensions:	Camera: 7" x 6.3" x 5". Receiver: 5.5" x 4" x 1.75"

Applications

Want to install a motion- and heat-sensing solar floodlight without having to hire an electrician to wire it? Install this solar powered security light anywhere around your home without wiring hassles or expensive battery replacement! This maintenance-free security light uses solar energy to power the long lasting, bright, energy-efficient halogen bulb, so you won't be left in the dark. Install a Solar Floodlight with Heat & Motion Sensor near each of your entryways and you can be sure that your family can enter and exit your home safely, even when there's a power outage. The Solar Floodlight is powered by a rechargeable lead acid battery, which is included.

The light works for approximately 2 weeks without ANY sunlight (at an average of eight 30-second light intervals each night)! A built-in motion and heat sensor turns the light on for people, but not for swaying tree branches. You can adjust the sensitivity of the sensor to pick up a full 90° horizontally, at a distance of up to 30 feet. Set the darkness level to keep the light from coming on too early in the evening or too late at night. Choose either a 30- or 60-second duration for the light to remain on after the last motion detected. A 14-foot cable between the solar panel and the light lets you place the security light where you need it, while allowing the solar panel to be installed facing the sun.

The unit has a built-in siren that can be switched ON/OFF using a slider switch. When the switch is ON the siren will sound each time the unit is activated (triggered by the motion sensor). The siren will sound at the same time that the light will be turned ON. If you do not wish the siren to turn ON, leave the switch in the OFF position.