Protected by Copyscape Plagiarism Checker - Do not copy content from this page.

AUDIO/VIDEO @ HOME > Listen anywhere > Wireless speakers

NicoShop is Marmitek Preferred Partner
 NicoShop.com®, SINCE 2002 Leader in ON-LINE X-10 Home Automation, is Authorized Marmitek Distributor and Marmitek Preferred Partner. We offer the complete Marmitek product range for Audio & Video at Home, Home Automation & Security, Video Door phones, IP Cameras. 

Wireless speaker cable

Make the back speakers for your surround set wireless!

Have you bought a surround sound set only to discover that it can be very hard to hide the cables that run to the rear speakers? Running cables across walkways is dangerous and it is not always possible to bridge the full distance with cable plinths.

So can it be done wirelessly?
With the Marmitek Surround Anywhere220 you can connect your existing rear speakers wirelessly. And the fact that the data is transmitted uncompressed and digitally means that you retain the original quality, without any disruptions or delays.

So how does it work?
Connect the speaker output from your surround amplifier to the digital audio transmitter using the audio cables supplied. Then connect to a power source. Connect both speakers to the digital audio receiver and plug in the power source. You can set the volume balance to precisely the right level during installation. The back speakers will then automatically copy the volume of the amplifier. The built-in amplifier means that this system provides sufficient power for your rear surround speakers.

Result:
Enjoy perfect surround sound, without having to run cables all over the floor.


Marmitek 08043 Surround Anywhere220 Set (Wireless Audio)
Make the back speakers for your surround set wireless!

Features

  • Connect your present home cinema rear speakers wirelessly; no more loose cables in your living room.
  • Uncompressed digital transfer ensures sound that goes beyond CD quality, without interference or delay.
  • The built-in amplifier in the receiver provides more than enough power for your rear surround speakers.
  • Automatic ON/OFF function of both transmitter and receiver for trouble-free use.
  • The volume is adjusted with your own remote, because the transmitter is directly connected to the speaker output.
  • Local volume on transmitter and receiver for the correct balance between front- and rear speakers.

Applications

Have you ever bought a surround sound set? If so, you probably quickly realised that it is tricky to work away the cables effectively. This particularly applies to the cables to the back speakers. Sometimes you have a skirting board under which you can place the cable but this is not always possible. Result: loose cables lying around your living room.

Today, Marmitek is introducing the Surround Anywhere220. A wireless, digital transmitter for your surround sound set which allows you to wirelessly connect your back speakers to your surround amplifier.

Surround Anywhere220

During installation, you can set the volume balance to precisely the right level and, after that, you shouldn't need to look at it again. This product is unique because it can simply be connected to the speaker output on the surround amplifier. The back speakers then copy the volume of the amplifier. The fact that the data is transmitted uncompressed and digitally means that the sound is better than CD quality and does not encounter any disruptions or delays.

So get rid of all of those loose cables and enjoy wireless surround sound from your surround set with the Marmitek Surround Anywhere220.

Watch the Marmitek video about the Surround Anywhere220!

Technical info

Supply voltage: 230 Vac + 10% -15% 50 Hz

Automatic power down feature: 30 Minutes

TRANSMITTER

  • Supply voltage: 230 Vac +10% -15% 50 Hz, 9V/250mA
  • Audio transmission method: Digital
  • Transmitter frequency: 5.8 GHz
  • Error correction: 1/2 rate FEC
  • Audio sampling method: 128 times oversampling
  • Transmitted data rate: > 3 Mbps
  • Transmitter operating range: max. 30 m line of sight, max. 10 m through walls and ceilings
  • Size: 150 x 120 x 70 mm (including antenna)

RECEIVER

  • Supply voltage: 230 Vac +10% -15% 50 Hz, 24V/1000mA
  • Output power: 2 x 30 W (2 X 15 W RMS)
  • Frequency response: 20 Hz - 23 KHz @ 8 Ohms
  • Signal-to-noise ratio: 91 dB (Transmitter / Amplifier, A-weighted)
  • Total harmonic distortion: typ. 0.05 % @ 10 W
  • Overall audio latency: < 1 ms
  • Power efficiency: 78%
  • Channel separation: typ. 75 dB

Brochure/Manual

Brochure Surround Anywhere220 Brochure
Manual Surround Anywhere220 Manual

FAQ

FAQ Frequently Asked Questions

Contacts

Contacts Contacts
Get more info by clicking on the title. To install the latest version of Adobe Reader, please click here.

 
 
 EUR 119,95
 

Availability: 2-3 business days

 
 
 
 
 
 		 Quantity
 
  view cart
NicoShop

Nicoshop - Rapetti Nicoletta
Headquarters: via A. Vespucci 40A/4A
16156 Genova-Pegli (Genova) - Italy
P.I. 01327480990, R.E.A. GE-401792
© 2002 NicoShop. All rights reserved
Any form of reproduction is forbidden