Marmitek 08051 Digital TV Anywhere Set (Wireless Audio/Video)
Digital wireless sender for all your Digital TV Channels.

Features

• Watch digital TV far away from the decoder
• Watch and operate the digital TV channels from your decoder anywhere.
• Extra functionality such as Video on Demand, Pay TV, Electronic Programme Guide, Time Shift and Digital Video Recorder (DVR) also remain available and usable.
• Place your TV wherever you want, without having to consider the location of the aerial or satellite connection and without laying cables or drilling holes.
• Retain original sound and picture quality as a result of digital transmission.

Applications

Watch digital TV anywhere in the house!

Do you watch digital TV? Would you like to watch it on a second TV in your house but do not have the COAX connection for your decoder? You can solve this problem with the new Marmitek Digital TV Anywhere. This allows you to watch TV wherever you like, regardless of where the decoder is located!

The introduction of the Digital TV Anywhere finally provides an affordable solution for connecting your TV remotely and wirelessly to your decoder or satellite receiver while retaining picture and sound quality. Unique, digital technology means that the wireless connection is 100% free from interruptions. And, unless you live in a castle or under a radio/TV mast (extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, will encounter no problems at all with the Digital TV Anywhere), Marmitek guarantees signal transmission throughout the house without any loss of quality!

The Digital TV Anywhere works perfectly with all (SD = Standard Definition. If you would like to transfer HDTV or analogue TV or watch videos from your DVD player, Hard disk recorder or cameras, then take a look at the range of solutions that Marmitek offers in the product group Watch Anywhere) digital TV decoders from cable suppliers and satellite and IPTV. For example BT Vision, Freesat, Freeview, Sky TV and Virgin.

The ideal solution if:

• you want to place your TV wherever you want, without having to consider the location of the aerial or satellite connection;
• the Homeplug A/V solution that is provided by the digital TV provider does not work (effectively);
• you are transferring to a new TV provider with all of the corresponding technological changes (e.g. from COAX to IP, without having to install a network cable [UTP, CAT5/CAT6]).

The advantages

• no COAX connection required to the TV;
• no need to lay cables or drill holes;
• guaranteed range throughout the house;
• no loss of quality due to digital transfer.

Watch the Marmitek video on Digital TV Anywhere:

Technical info

General specifications

• Supply voltage: 100 - 240 VAC / 50/60Hz / 2 x DC adapter
• Power consumption: < 7 W
• Operation Frequency Range: 2400 ~ 2478 MHz, FHSS mode up to 25 channels
• AV RF transmission: digital
• Transmission range: Up to 200 m free field, up to 50 m through walls and ceilings
• IR frequency range: 30 ~ 60kHz
• LEDs: Power, Link
• Ambient temperature: 0 ~ +50°C (Operation) -20°C tot +70°C (storage)

Digital AV Transmitter

• Input jack: AV Jack (3.5 mm)
• AV Connection cable: AV Jack to SCART
• Dimension (Only unit): 160 x 120 x 30 (mm)

Digital AV Receiver

• Output Image Resolution: 720 x 480 (D1) 720 x 576 (480i, 576i)
• Output frame rate: 30 fps 25 fps
• Output jack: AV Jack (3.5 mm)
• AV Connection cable: AV Jack to SCART
• Dimension (Only unit): 160 x 120 x 30 (mm)

Brochure/Manual

 Digital TV Anywhere Brochure
 Digital TV Anywhere Manual

Warning

ATTENTION: extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 149,95
 

Availability: 2-3 business days

Marmitek 08061 Analogue TV Anywhere Set (Wireless Audio/Video)
Wireless sender for all your Analogue TV Channels.

Features

• Watch analogue TV far away from the antenna connection
• Place your TV wherever you want, without having to worry about the location of the aerial point. No coax cables running through your house!
• Suitable for wirelessly transmitting all of your channels to another room.
• Can be connected directly to any TV antenna box.
• Extra connections for transmitting the video signal from an HDD recorder or DVD player, for example.
• Does not encounter any interruption from microwaves, wireless (WiFi) networks, Bluetooth and so on as a result of using the 5.8 GHz frequency band.

Applications

So how does it work?

It’s very easy. Connect the Analogue TV Anywhere transmitter directly to your antenna connection. The built-in TV tuner saves all available TV channels in its memory. The transmitter has wireless contact with the receiver that you have connected to your TV. The signal passes through floors and walls.

Technical info

General specifications

• Operating range: Up to 100m free field, up to 30m through walls and ceilings
• Power: 100/240 VAC 50/60Hz, 5V/1000mA
• Built in cable tuner: VHF low, VHF high, UHF
• Standard: PAL B/G & PAL I
• Compatibility: +/- channel compatible
• Memory: 100 channel
• RF Frequency: A/V: 5,8 GHz - 4 channels ; IR: 433.92 MHz
• RF Transmission: Analogue

Brochure/Manual

 Analogue TV Anywhere Brochure
 Analogue TV Anywhere Manual

Warning

ATTENTION: PAL B/G & PAL I Standard.
Extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 129,95
 

Availability: 2-3 business days

Marmitek 08075 Analogue TV Anywhere Extra receiver (Wireless Audio/Video)
For your Analogue TV Anywhere system.

Features

• Extra receiver for Analogue TV Anywhere
• Receive the signal of your transmitter on more than one TV

Applications

Extra receiver for your Analogue TV Anywhere system. With an extra receiver you can receive the signal of the sender at more places in your house. Also ideal for presentations with more than one TV screen! This receiver is standard equipped with an infrared extender feature.

Brochure/Manual

 Analogue TV Anywhere Brochure
 Analogue TV Anywhere Manual

Warning

ATTENTION: PAL B/G & PAL I Standard.
Extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 49,95
 

Availability: 2-3 business days

Marmitek 09617 TV Anywhere 2.4 Set (Wireless Audio/Video)
2.4 GHz Wireless Audio/Video Sender with built-in tuner.

Features

• Watch analogue TV far away from the antenna connection!
• Place your TV wherever you want, without having to worry about the location of the aerial point. No coax cables running through your house!
• Suitable for wirelessly transmitting all of your TV channels to another room
• Can be connected directly to any TV antenna box.
• Extra connections for e.g. satellite receiver, DVD player or VCR.
• Including universal remote control to control the TV Anywhere, but also your TV, DVD, VCR and satellite receiver. The signal even travels through walls and ceilings!
• Channels can easily be put in your favourite order.

Applications

How does the TV Anywhere work?

It's really simple! Connect the TV Anywhere transmitter directly to your antenna box. The built-in Philips TV tuner will memorise all available TV channels. The transmitter creates a wireless connection to the receiver, which you connect to your TV. The signal travels through walls and ceilings. You can use the remote control included to select the channel you want to watch.

Technical info

• Built-in tuner: Philips. VHF low, VHF high, UHF. PAL BG / PAL I / PAL DK / SECAM DK / SECAM L
• Range: Up to 100m free field, up to 30m through walls and ceilings
• Power: 230VAC/50Hz 7,2V/250mA (receiver) and 7,2V/450mA (transmitter) DC mains adapter
• Memory: 120 channels.
• Frequency: A/V: 2.4 GHz, 4 channels (A,B,C,D) / IR: Built-in, 433.92 MHz
• Output: 10 mW max. Controls up to 6 devices
• Universal Remote: (TV Anywhere, TV, VIDEO, DVD, ASAT, DSAT)
• Dimensions (LxWxH): Transmitter 150 x 115 x 53 mm (with antenna folded) / Receiver 85 x 95 x 35 mm (with antenna folded)

Brochure/Manual

 TV Anywhere Brochure
 TV Anywhere Manual
 TV Anywhere Remote Manual

Warning

ATTENTION: PAL D/K, SECAM D/K, L/L Standard.
Extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 99,95
 

Availability: 2-3 business days

Marmitek 08084 GigaView 821 Set (Wireless Audio/Video)
Wireless Full HD + 3D Audio/Video Sender.

Features

• Connect, split and replace your HDMI cable wirelessly
• Replace your HDMI cable wirelessly and locate your HDTV or projector wherever you want.
• Mount the receiver (out of sight) behind your HDTV or on the ceiling next to your projector. No more visible cables.
• Watch up to 2 (HD) devices such as Blu-ray® players, digital video recorders (DVRs), HD set-top boxes, PS3^™ or Xbox® game consoles or standard DVD players/ recorders elsewhere in your home and easily switch between the sources connected without changing plugs.
• Suitable for Full HD 1080p and all 3D formats.
• The built-in HDMI splitter means that you can also connect an HDTV to the Transmitter so that you can continue to watch the connected devices locally.
• Operate your A/V sources from anywhere, even through a wall or cupboard door, using the IR receiver.
• The HD signal does not experience any delays and is therefore perfect for game consoles.
• 100% HDCP compliant.
• Sends the HD signal uncompressed.

Applications

Transmit Full HD 3D signal without any loss of quality and without cables

Marmitek, specialist in audio/video operation, transmission and connectivity, is introducing the GigaView 821. As the first in Europe to come up with a wireless 3D HDMI solution, Marmitek is once again demonstrating its credentials as an exceptionally innovative company. The GigaView 821 wirelessly transmits the signal from the connected HD devices without compression and without any loss of quality to your HDTV or projector.

Flexible positioning of your TV screen or projector

The GigaView 821 provides the ultimate combination of ease-of-use, flexibility and interior design. Its wireless capability means it is not necessary to lay cables from your HD sources to your TV or projector. As a result, it is easy to position the TV or to change its location without having to deal with a mass of corresponding cables. Connecting a TV in the kitchen to a decoder in the living room has never been so easy! The infrared 'pass trough' also means that you can continue to operate the HD devices even though they are out of sight.

So how does it work?

The GigaView 821 comprises two stylised boxes which serve as transmitter and receiver respectively. The receiver is connected to the TV and the transmitter can be connected to a maximum of 2 (HD) devices. This includes Blu-ray® players, digital video recorders (DVRs), HD set-top boxes, gaming consoles (PS3^™ or Xbox® 360), Media Center PCs or standard DVD players/recorders. Switching between these devices is simple with one press of a button on the remote control supplied.

3D

The Marmitek GigaView 821 supports all 3D resolutions. This has never been seen before in Europe. It will also, of course, effortlessly transmit 2D signals. The product fulfils the HDCP standard which means there is maximum compatibility with other HDMI equipment.

Uncompressed

With the GigaView 821, the HD signal wirelessly bridges a distance of up to 25 metres (line of sight; up to 15m with obstacles) to the HDTV or projector without any loss of quality. The Marmitek GigaView 821 transmits the 1080p signal without first compressing it. The wirelessly received signal is then sent on without any delay (ideal for game consoles) and with exactly the same properties as when it would be transmitted via a top quality HDMI cable.

Technical info

Resolutions

• Supported Standards: All 3D formats, Deep Color, HDCP, EDID
• Supported video resolution : 480p, 576p, 720p, 1080i, 1080p
• Supported PC Resolution (max.): 1600 x 1200
• Supported 3D formats: 1080p@23.98/24 Hz, 720p@59.94/60/50 Hz
• Supported audio formats (digital): up to 6 Mbps AC-3 and DTS (Digital)

Wireless

• Operating frequency : 5.1 ~ 5.6 GHz
• Operating range : Up to 20 meter LOS (Line Of Sight) / Up to 10 meter non LOS
• System latency: no latency ( < 1ms)

Transmitter

• HDMI input: 2 x HDMI (19-pin female)
• HDMI output (built-in Splitter): 1x HDMI (19-pin female)
• IR extender LED : 2,5mm jack
• Dimensions : 192 x 97 x 32mm

Receiver

• HDMI output : 1 x HDMI (19-pin female)
• Dimensions : 95 x 95 x 32mm

Infrared

• Supported IR Frequency : 36kHz - 56kHz

Power supply

• Switch mode power supply : 100-240VAC @ 50-60Hz, 5VDC 1.5A

Brochure/Manual

 GigaView 821 Brochure
 GigaView 821 Manual

Warning

ATTENTION: extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 329,00
 

Availability: 2-3 business days

Marmitek 08023 GigaView820 HDMI Set (Wireless Audio/Video)
Wireless Full HD Audio/Video Sender.

Features

• Replace your HDMI cable wirelessly and locate your HDTV or projector wherever you want.
• Mount the receiver (out of sight) behind your HDTV or on the ceiling next to your projector. No more visible cables.
• Watch up to 2 (HD) devices such as Blu-ray® players, digital video recorders (DVRs), HD set-top boxes, PS3™ or Xbox® game consoles or standard DVD players/ recorders elsewhere in your home and easily switch between the sources connected without changing plugs.
• The built-in HDMI splitter means that you can also connect an HDTV to the Transmitter so that you can continue to watch the connected devices locally.
• Operate your A/V sources from anywhere, even through a wall or cupboard door, using the IR receiver.
• The HD signal does not experience any delays and is therefore perfect for game consoles.
• Digitally supports all 480p, 720p, 1080i and 1080p (Full HD) resolutions from up to 20 metres.
• 100% HDCP compliant.
• Sends the HD signal uncompressed.

Applications

Second generation Wireless HDMI!
Switcher, splitter and Wireless HDMI trasmitter through Marmitek GigaView820

When wireless HDMI was still a long way off, Marmitek was the first in Europe, in April 2009, to provide an ingenious solution in the form of the GigaVideo800 HDMI. After one and a half years of ongoing development, Marmitek believes it is now time for the second generation wireless HDMI, the GigaView820.

Why transmit HDMI wirelessly?
The enthusiasm about a stunning TV, hanging on the wall like a picture, reduced significantly when it became clear that it was tricky to hide all the cables. Cables laid to the projector on the ceiling are unlikely to win any beauty prizes either. The Marmitek GigaView820, however, makes this situation a thing of the past. You mount the receiver easily and out of sight on the wall behind your TV or on the ceiling next to your projector. An ingenious system then allows you to continue to operate the connected HD devices even though they are out of sight.

Switcher, transmitter and splitter in one!
The GigaView820 is an HDMI switcher, transmitter and splitter in one! It wirelessly transmits the uncompressed HD signal from two connected HD devices, without a loss of quality, to your HDTV or projector elsewhere on the same floor. The built-in HDMI splitter means that you can also connect an HDTV to the transmitter so that you can continue to watch the connected devices locally.

Uncompressed
With the GigaView820, the Full HD signal wirelessly bridges a distance of 20 metres (LOS) to the HDTV or projector without any loss of quality. The Marmitek GigaView820 transmits the 1080p signal without first compressing it. The wirelessly received signal is then sent on without delay (ideal for game consoles and if the sound is running via a different source to the image) with exactly the same properties as when it is transmitted over a top quality HDMI cable.

How does it works?
The GigaView820 comprises two stylised boxes which serve as transmitter and receiver respectively. The receiver is connected to the TV, while the transmitter can be connected to a TV or beamer and two HD devices. This may be any A/V device that is equipped with an HDMI output, such as Blu-ray® players, digital video, recorders (DVRs), HD set-top boxes, gaming consoles (Wii, PS3™ or Xbox® 360), Media Center PCs or standard DVD players/recorders. Switching between these devices is simple with one press of a button on the remote control supplied. Another important advantage of the GigaView820 is that it is no longer necessary to constantly plug and unplug cables from HD devices into/out of the HDTV or projector.

HDCP
The Marmitek GigaView820 supports all digital resolutions, including 480p, 576p, 720p, 1080i and 1080p @ 60fps (Full HD) and the product fulfils 100% of the HDCP standard. High-bandwidth Digital Copy Protection (HDCP) is a system which prevents pirating practices. Decoders with HDCP only transmit a digital signal to devices that also support HDCP, such as the Marmitek GigaView820.

Technical info

Resolutions

• Supported video resolution (YPbPr) : 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
• Supported video resolution (HDMI) : 480p, 576p, 720p, 1080i, 1080p@24/30fps
• Supported audio formats (analog) : 48kHz and 24-bit per sample
• Supported audio formats (digital) : up to 3.072 Mbps AC-3 and DTS

Wireless

• Operating frequency : 5.1 ~ 5.2 GHz
• Operating range : Up to 20 meter LOS (line of sight) - up to 10 meter non LOS
• System Latency : No latency (<1ms)

Transmitter

• HDMI input : 2x HDMI (19-pin female)
• Component input : 2x YPbPr (RCA)
• Audio input : 2x RCA
• IR extender blaster : 2.5mm jack
• Dimensions : 295 x 149 x 46mm

Receiver

• HDMI output : 1x HDMI (19-pin female)
• IR extender sensor : 2.5mm jack
• Dimensions : 180 x 140 x 39mm

Infrared

• Supported IR frequency : 36kHz / 38kHz

Power supply

• Switch mode Power adaptor : 100-240VAC @ 50-60Hz, 5VDC 3A

Brochure/Manual

 GigaView820 Brochure
 GigaView820 Manual

Warning

WARNING: Use only category 2 HDMI certified cables for the best quality in image and sound.

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 389,00
 

Availability: 2-3 business days

Marmitek 08040 GigaView810 HDMI Set (Wireless Audio/Video)
Single Room Wireless Full HD Audio/Video Sender.

Features

• Replace your HDMI cable wirelessly and locate your HDTV or projector wherever you want in the same room. No need to worry about the location of your HD equipment.
• Perfect if you would rather not see cables running across the walls or if you do not want to or cannot drill holes and lay cables.
• Mount the receiver (invisibly) behind your HDTV or on the ceiling next to your projector.
• Watch every HD device, such as a Blu-ray® player, Digital Video Recorder (DVRs) or HD set-top box, wirelessly in the same room.
• The HD signal does not encounter any delay and is, therefore, perfect for use with Game Consoles (PS3™ or Xbox®) and prevents lip-sync problems with your Home Cinema set.
• Digitally supports all 480p, 576p, 720p, 1080i and 1080p (Full HD) resolutions up to a distance of 10 metres.
• No loss of image or sound quality as the HD signal is being transmitted without compression.
• 100% HDCP compliant.

Applications

Replace your HDMI cable wirelessly and locate your HDTV or projector wherever you want in the same room.
No need to worry about the location of your HD equipment. Perfect if you would rather not see cables running across the walls or if you do not want to (or cannot) drill holes and lay cables. Suitable for all HDMI equipment, such as Blu-ray®, HD set-top box or Game Console.

Technical info

Resolutions

• Supported video resolution (HDMI) : 480p, 576p, 720p, 1080i, 1080p (24/30/50/60 Hz)
• Supported audio formats (digital) : up to 6 Mbps AC-3 and DTS
• Supported HDMI standards : HDCP 2.0, EDID/E-DCC1.1, CEC

Wireless

• Operational frequency : 5.1 ~ 5.6 GHz
• Operational range : Up to 10 metres LOS (line of sight), up to 5 metres outside LOS
• System Latency : No latency (<1ms)

Transmitter

• Connected power mode : 100-240Vac @ 50-60Hz, 5VDC 1500mA
• HDMI input : 1x HDMI (19-pin female)
• Dimensions : 181 x 145 x 33mm

Receiver

• Connected power mode : 100-240Vac @ 50-60Hz, 5VDC 2000mA
• HDMI output : 1x HDMI (19-pin female)
• Dimensions : 181 x 145 x 33mm

Brochure/Manual

 GigaView810 Brochure
 GigaView810 Manual

Warning

WARNING: Use only category 2 HDMI certified cables for the best quality in image and sound.

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 329,00
 

Availability: 2-3 business days

Marmitek 08011 GigaView745 Set (Wireless Audio/Video)
The first in Europe to have a digital video transmitter !

Features

• New WiVi Technology that provides a wireless, secured signal without any loss of the original quality.
• Whole house coverage using updated internal antenna technology, maximises performance and range.
• No interference from other wireless devices as a result of using Dynamic Frequency Selection which automatically selects an available frequency from 23 channels.
• The built-in infrared extender allows you to operate your A/V device with your own remote control, even through a wall or behind closed cabinet doors!
• Plug & Play is possible with most A/V devices; no software or network settings are required.
• Energy efficient power adapters and transmission technology which use precisely the amount of power needed to be able to guarantee a connection.

Applications

In 2009, Marmitek - specialist in the area of audio/video transfer and connectivity - was the first to introduce "Wireless HDMI". Today, Marmitek is further proving itself as an innovative player with a digital audio/video transmitter for A/V equipment which is not equipped with HDMI. The GigaView745 transmits the signal wirelessly and digitally from your A/V equipment to any other room in your house without any loss of quality.

Last year, Marmitek - specialist in the area of audio/video transfer and connectivity - was the first to introduce "Wireless HDMI". Today, Marmitek is further proving itself as an innovative player with a digital audio/video transmitter for A/V equipment which is not equipped with HDMI. The GigaView745 transmits the signal wirelessly and digitally from your A/V equipment to any other room in your house without any loss of quality. Wireless surpasses cable quality Cables are often chosen as a more secure and better quality option. We are now daring to suggest, however, that image and sound is of a better quality after wireless transmission with the GigaView745 than with the best A/V cable, used over the same distance. Applications The GigaView745 is the perfect solution if the distance between A/V source and the TV cannot be bridged using a cable because, for example, no wiring is installed (e.g. no antenna connection near the TV to connect your set-top box) or the cables cannot be hidden: TV and A/V source are far away from each other (in the same or in another room) Watch satellite or digital TV in the bedroom (copy of channel TV1 ) If you have 1 set-top box and want to watch digital television on a 2nd TV as well then all you need to do is connect the GigaView745 to the set-top box. You can then watch television on TV1 or on TV2. You can also watch on both TVs simultaneously but it has to be the same channel. Watch satellite or digital TV in the bedroom (own channel) You would like to watch a channel on TV2 that differs from that on TV1. This is also possible but requires a set-top box with a double tuner or 2 set-top boxes. Numerous sources The GigaView745 is suitable for every A/V device that has a SCART, Composite or S-VIDEO output, including DVD players, satellite receivers, decoders, set-top boxes or HDD recorders. Would you like to transmit the signal from numerous sources to your (second) TV? This is not a problem in combination with Marmitek’s Connect236 switcher. Unique WiVi digital transmission technology and improved antenna technology Marmitek GigaView745 transmits the signal using innovative WiVi technology. This technology transmits your audio/video signal wirelessly, securely and without any interference. The digital signal crosses a distance of up to 100 metres free field and up to 30 metres through walls and ceilings without any loss of quality. Improved antenna technology means that there is no need to set antennae.

Technical info

WIRELESS

• Operating range: Up to 100m free field - Up to max. 25 m through walls (indicative!)
• Operating frequency: 5GHz
• Compression Standard: MPEG-2
• Video data rates: Up to 15Mbps
• System security: 128-bit Advance encryption Standard (AES)
• System latency: 50 ms

A/V TRANSMITTER

• Supported video standard: Auto detection of NTSC and PAL
• Video input: 1x S-Video or 1x RCA (Composite)
• Audio input: Analog stereo (2x RCA)
• IR extender output: 3.5 mm jack
• Dimensions: 141x143x38mm

A/V RECEIVER

• Video output: 1x S-Video or 1x RCA (Composite)
• Audio output: Analog stereo (2x RCA)
• Dimensions: 151x143x38mm

INFRARED EXTENDER

• Supported IR frequency: 38kHz
• IR latency: 100 ms

POWER SUPPLY

• Switch mode Power Supply: 100-240VAC - 50/60Hz - 5VDC 2.5A

Brochure/Manual

 GigaView745 Brochure
 GigaView745 Manual

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 299,00
 

Availability: in stock

Marmitek 09780 5.8 GHz GigaVideo570 Set (Wireless Audio/Video)
5.8 GHz Wireless Dual Audio and Video Sender.

Features

• Watch and operate all the channels of your set-top box, everywhere
• Watch all your digital TV channels on a second TV.
• Also the extra functionalities such as Video on Demand, Pay TV, Electronic Program Guide, Time Shift and Digital Video Recorder (DVR) remain available and controllable from the second TV.
• Image and stereo sound, wirelessly through walls and ceilings.
• Suitable for each brand of set-top box, satellite receiver, decoder, HD recorder, DVD player etc.
• Compatible with Sky, Sky+, SkyHD and other multimedia appliances (if you're not sure about compatibility between your appliances and Marmitek products, please contact us).
• Is not interfered by microwave ovens, wireless networks (WiFi) etc. due to the 5.8 GHz frequency band.

Applications

The Marmitek GigaVideo 570 enables you to transmit the signal of your Video recorder, DVD-player, DVD-recorder, Satellite receiver, set top box, PC etc. to your (second) TV without running wires.
With the GigaVideo570 you can also transmit films from your PC to the TV in the living room or bedroom, transmit MP3 audio to your Hifi System and monitor your baby or patients using your video camera, all from a remote location.

The built-in infrared extension feature enables you to control your A/V devices with your own remote control from the room where you are watching TV!

Using the 5.8 GHz frequency, you will usually experience no interference from e.g. wireless (2.4 Ghz WiFi) networks or a microwave oven.

How does the GigaVideo570™ works?

The set consists of a transmitter and a receiver. You connect the transmitter to the A/V output of your source (for instance set-top box). Then you connect the receiver to your second TV. What’s more, you can keep operating the source which is located elsewhere with your own remote control using the infrared extender.

Technical info

GigaVideo570™ Transmitter

• Range: Up to 100m free field, 10-30m through walls and ceillings (indicative!)
• Power: 230VAC/50Hz, 7.2VDC adapter. 320mA
• Frequency: Audio/Video: 5.8GHz, 4 channels (A, B, C, D)
• IR: 433.92 MHz.
• A/V input: 1x Mini-DIN (A/V IN ) - 1x RCA (A/V IN 1x Video 2x Audio)
• A/V output: 1x Mini-DIN (AV OUT)
• Video input: 1Vpp (typ) 75 Ohm
• Audio input: 1Vpp (typ) 600 Ohm
• Audio: Stereo
• Dimensions: 140x100x140mm (with upright antenna)

GigaVideo570™ Receiver

• Power: 230VAC/50Hz, 7.2VDC adapter, 250mA
• Frequency: Audio/Video: 5.8GHz, 4 channels (A, B, C, D)
• A/V output: 1x Mini-DIN (AV OUT)
• RF output PAL-B/G: Channel 36
• RF output PAL-I: Channel 48
• Video output: 1Vpp (type) / 75 Ohm
• Audio output: 1Vpp (type) / 600 Ohm
• Audio: Stereo
• Dimensions: 92x58x20mm (with upright antenna)

Brochure/Manual

 GigaVideo570 Brochure
 GigaVideo570 Manual

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 79,95
 

Availability: 2-3 business days

Marmitek 09782 GigaVideo570 Extra Receiver (Wireless Audio/Video)
Extra receiver for expanding your GigaVideo 570 Audio Video Sender.

Features

• Extra receiver for GigaVideo570 set.
• Receive the signal of your transmitter on more than one appliance.
• 5.8 GHz frequency.
• Compatible with Sky, Sky+, SkyHD and other multimedia appliances (if you're not sure about compatibility between your appliances and Marmitek products, please contact us).

Applications

Extra receiver for your GigaVideo 570 5.8 GHz system.

With an extra receiver you can receive the signal of the sender at more places in your house. Also ideal for presentations with more than one TV screen! The receiver is standard equipped with an infrared extender feature. Using the 5.8GHz frequency, you will normally have no problems with distortion from wireless (WiFi) networks, microwave for example.

Technical info

The GigaVideo570 receiver is currently only available with EU power supply.

Brochure/Manual

 GigaVideo570 Brochure
 GigaVideo570 Manual

FAQ

 Frequently Asked Questions

Contacts

 Contacts

 
 
 EUR 54,95
 

Availability: in stock

Marmitek 09821 5.8 GHz GigaVideo580 Set (Wireless Audio/Video)
5.8 GHz Wireless Audio and Video Sender.

Features

• Wireless sound and vision!
• Wireless transmission of pictures and stereo sound through walls and ceilings.
• No distortion from devices such as microwave ovens, wireless (WiFi) networks, Bluetooth, etc. by using the 5.8 GHz frequency band.
• Watch programs and movies on your (second) TV.
• Can be used with any make of DVD player, satellite receiver, decoder, etc.
• Compatible with Sky, Sky+, SkyHD and other multimedia appliances (if you're not sure about compatibility between your appliances and Marmitek products, please contact us).

Applications

The Marmitek GigaVideo 580 enables you to transmit the signal of your Video recorder, DVD-player, DVD-recorder, Satellite receiver, set top box, PC etc. to your (second) TV without running wires.
With the GigaVideo580 you can also transmit films from your PC to the TV in the living room or bedroom, transmit MP3 audio to your Hifi System and monitor your baby or patients using your video camera, all from a remote location.

The built-in infrared extension feature enables you to control your A/V devices with your own remote control from the room where you are watching TV!

Using the 5.8 GHz frequency, you will usually experience no interference from i.g. wireless (2.4 Ghz WiFi) networks or a microwave oven.

Technical info

GigaVideo580 not compatible with other 2.4 GHz video senders in our product range.

Brochure/Manual

 GigaVideo580 Brochure
 GigaVideo580 Manual

FAQ

Contacts

 
 
 EUR 99,95
 

Availability: in stock

Marmitek 09823 GigaVideo580 Extra Receiver (Wireless Audio/Video)
Extra receiver for expanding your GigaVideo 580 Audio Video Sender.

Features

• Extra receiver for GigaVideo580 set.
• Receive the signal of your transmitter on more than one appliance.
• 5.8 GHz frequency.
• Compatible with Sky, Sky+, SkyHD and other multimedia appliances (if you're not sure about compatibility between your appliances and Marmitek products, please contact us).

Applications

Extra receiver for your GigaVideo 580 5.8 GHz system.
With an extra receiver you can receive the signal of the sender at more places in your house. Also ideal for presentations with more than one TV screen! Combine multiple receivers to receive the A/V signal from the transmitter on multiple TV's in your house. The signal will be the same on all receivers.

Technical info

Only compatible with GigaVideo 580.

Brochure/Manual

 GigaVideo580 Brochure
 GigaVideo580 Manual

FAQ

Contacts

 
 
 EUR 79,95
 

Availability: 2-3 business days

Marmitek 09895 GigaView345 Set (Wireless Audio/Video)
2.4 GHz Wireless Dual Audio and Video Sender.

Features

• Wireless transmission of pictures and stereo sound through walls and ceilings.
• Watch TV and movies on your second TV.
• Can be used with most brands of DVD player, hard disk recorder, satellite receiver, decoder, etc.
• Easy to install.

Applications

The GigaView345 set consists of a transmitter and a receiver.
Connect the transmitter to your A/V equipment (e.g. PC or DVD player). Then connect the receiver to your second TV. Via the infrared extender, you can also continue to operate A/V equipment that is set up in a different room (or in a closed cupboard) with your own remote control.

Technical info

GigaView345™ Transmitter

• Range: Up to 100m free field, 10-30m through walls and ceillings (indicative!)
• Power: 230VAC/50Hz, 6VDC adapter. 300mA
• Frequency: Audio/Video: 2.4GHz, 4 channels (A, B, C, D)
• IR: 433.92 MHz.
• A/V input: 3x Cinch (2x Audio, 1x Video)
• Video input: 1 Vpp (typ) 75 Ohm
• Audio input: 1Vpp (typ) 600 Ohm
• Audio: Stereo
• Dimensions: 92x85x140mm (with upright antenna)

GigaView345™ Receiver

• Power: 230VAC/50Hz, 6VDC adapter, 300mA
• Frequency: Audio/Video: 2.4GHz, 4 channels (A, B, C, D)
• A/V output: 3x Cinch (2x Audio, 1x Video)
• Video input: 1Vpp (type) 75 Ohm
• Audio output: 1Vpp (type) 600 Ohm
• Audio: Stereo
• Dimensions: 92x85x140mm (with upright antenna)

Brochure/Manual

 GigaView345 Brochure
 GigaView345 Manual

FAQ

Contacts

 
 
 EUR 49,95
 

Availability: 2-3 business days

Marmitek 09730 Invisible Scart 300 Set (Wireless Audio/Video)
Wireless transmission of pictures and stereo sound through walls and ceilings.

Features

• Wireless transmission of pictures and stereo sound through walls and ceilings.
• Watch TV and movies on your second TV screen.
• Control your DVD player, VCR, satellite receiver, decoder, etc. from anywhere in your home using the freely placeable IR receiver.
• Easy to install. The compact receiver with a tilt scart connection fits behind any TV screen, directly on the scart input.
• Compatible with Sky, Sky+, SkyHD and other multimedia appliances (if you're not sure about compatibility between your appliances and Marmitek products, please contact us).

Applications

With the Marmitek Invisible Scart 300, you can send wireless signals from your video recorder, dvd player, dvd recorder, satellite receiver, set top box, PC, etc. to your (second) TV screen. With the freely placeable infrared receiver, you can still use your own remote control to operate your A/V device from the room where you are watching TV. Because of its compact design, the Invisible Scart 300 can be attractively combined with a flat screen (LCD, Plasma TV) and is of course ideal for any TV with a scart connection.

Technical info

Brochure/Manual

 Invisible Scart300 Brochure
 Invisible Scart300 Manual

FAQ

Contacts

 
 
 EUR 54,95
 

Availability: in stock

Marmitek 09716 Invisible Scart 200 Set (Wireless Audio/Video)
Wireless replacement of the Scart cable.

Features

• Wireless replacement of the Scart cable.
• Place your TV screen wherever; no long or thick scart cable in plain view anymore.
• Control your DVD player, VCR, satellite receiver, decoder, etc. from any angle, even through a wall or cabinet door, using the freely placeable IR receiver.
• Easy to install. The compact transmitter and receiver with a tilt scart connection fit behind any A/V equipment and TV screen, directly on the scart input.
• Compatible with Sky, Sky+, SkyHD and other multimedia appliances (if you're not sure about compatibility between your appliances and Marmitek products, please contact us).

Applications

With the Marmitek Invisible Scart 200, you can send wireless signals from your video recorder, dvd player, dvd recorder, satellite receiver, set top box, etc. to your TV screen. Ideal for situations in which you do not want to or cannot place your A/V device close to your TV. Via the freely placeable infrared receiver, you can still use your own remote control to operate your A/V device, even if it is not in view or situated in a closed cabinet. Because of its compact design, the Invisible Scart 200 can be attractively combined with a flat screen (LCD, Plasma TV) and is of course ideal for any TV with a scart connection.

Technical info

Brochure/Manual

 Invisible Scart200 Brochure
 Invisible Scart200 Manual

FAQ

Contacts

 
 
 EUR 44,95
 

Availability: 2-3 business days

Marmitek 09721 2.4 GHz extra SCART Receiver (Wireless Audio/Video)
Extra receiver for expanding your Marmitek Wireless 2.4 GHz Videosender!

Features

• Extra receiver for expanding your TV Anywhere, PC to TV Sender, Gigavideo45, Invisible Scart 200,Invisible Scart 300 or GigaVideo 80 videosender.
• Also compatible with XCam2
• The compact receiver with a smart swivel scart fits behind any TV screen, directly on the scart input.
• Receive the signal of your transmitter on more than one appliance
• Equipped with an infrared extender feature.
• Compatible with Sky, Sky+, SkyHD and other multimedia appliances (if you're not sure about compatibility between your appliances and Marmitek products, please contact us).

Applications

Extra receiver for your 2.4 GHz system. With an extra receiver you can receive the signal of the sender at more places in your house. Also ideal for presentations with more than one TV screen!
Combine multiple receivers to receive the A/V signal from the transmitter on multiple TV's in your house. The signal will be the same on all receivers.

Technical info

Not compatible with Gigavideo70.
This extra receiver is only available with EU power supply, suitable for use in most European countries.

Brochure/Manual

 Invisible Scart300 Brochure
 Invisible Scart300 Manual

FAQ

Contacts

 
 
 EUR 34,95
 

Availability: in stock

Marmitek 09723 GigaVideo 80 Set (Wireless Audio/Video)
Dual Source, Silver coloured, Wireless Audio/ Video transmission Set.

Features

• Send wireless audio-visual signals to your TV and switch between the 2 A/V devices!
• Wireless transmission of pictures and stereo sound through walls and ceilings.
• Watch programmes and movies on your (second) TV.
• Switch easily without changing the cables between the 2 A/V devices connected to the system.
• Can be used with any make of DVD player, VCR, satellite receiver, decoder, etc.
• Compatible with Sky, Sky+, SkyHD and other multimedia appliances (if you're not sure about compatibility between your appliances and Marmitek products, please contact us).

Applications

With the Marmitek GigaVideo80, you can send wireless signals from your video recorder, dvd player, dvd recorder, satellite receiver, set top box, PC, etc. to your (second) TV. You can connect 2 A/V devices simultaneously and simply switch between the two signals without having to change the connections. With the built-in infrared extension, you can continue to operate your A/V device with your own remote control from the room in which the TV is situated! You can also use your remote control to switch between the signals from the connected devices.

Technical info

Marmitek GIGAVIDEO 80 Transmitter:

• Range: Up to 100m free field, 10-30m through walls and ceilings (indicative!)
• Power: 230VAC/50Hz, DC adapter
• Frequency: A/V: 2,4GHz, 4 channels (A, B, C, D).
• IR: 433.92 MHz.
• A/V input: 2x Mini-DIN (AV IN 1 - AV IN 2)
• A/V output: 1x Mini-DIN (AV OUT)
• Video input: 1Vpp (typ) 75 Ohm
• Audio input: 1Vpp (typ) 600 Ohm
• Audio: Stereo.
• Dimensions: 140x100x140mm (with upright antenna)

Marmitek GIGAVIDEO 80 Receiver:

• Power: 230VAC/50Hz, DC adapter
• Frequency: A/V: 2,4GHz, 4 channels (A, B, C, D).
• A/V output: 3x RCA (AV OUT 1xVideo 2x Audio)
• Video output: 1Vpp (type) / 75 Ohm
• Audio output: 1Vpp (type) / 600 Ohm
• Audio: Stereo.
• Dimensions: 92x58x20mm (with upright antenna)

Brochure/Manual

 GigaVideo80 Brochure
 GigaVideo80 Manual

FAQ

Contacts

 
 
 EUR 69,95
 

Availability: 2-3 business days

Marmitek 09488 2.4 GHz Extra Receiver (Wireless Audio/Video)
Extra receiver for expanding your Marmitek 2.4 GHz Wireless Video Sender!

Features

• Receive the signal of your transmitter on more than one television
• Equipped with an infrared extender feature.
• 2.4 GHz Transmission Frequency
• Extra receiver for expanding one of the following Marmitek Video Senders :
• TV Anywhere 2.4 GHz
• Gigavideo45
• Invisible Scart 200
• Invisible Scart 300
• GigaVideo 80

Applications

Extra receiver for your 2.4 GHz system. With an extra receiver you can receive the signal of the sender at more places in your house. Also ideal for presentations with more than one TV screen! The 2.4 GHz receiver is standard equipped with an infrared extender feature.

Technical info

Receiver:

• Power: 12VDC
• Receiver: 4 channels.
• A/V Output: 3x Cinch (2x Audio, 1x Video)
• Video Output: 1 Vpp (typ)
• Audio Output: 1 Vpp (typ)
• Dimensions: 135x100x140mm
• Weight: 235 grams

Brochure/Manual

 2.4GHz Receiver Manual

FAQ

Contacts

 
 
 EUR 36,95
 

Availability: 2-3 business days

Marmitek 09380 GigaVideo 70 Set (Wireless Audio/Video)
Silver coloured Wireless Audio / Video transmission.

Features

• Watch a movie on any TV in Your home without moving your VCR or running cables
• Watch satellite programs on any TV anywhere in your house
• Watch DVD movies from your PC on your TV in a remote location
• Listen to MP3 audio from your PC on your Hifi system in the livingroom
• Monitor your sleeping baby, eldery or disabled on your TV by using your videocamera or CCD camera
• Make perfect demonstrations without wiring TV’s during trade-shows, seminars, etc.
• Compatible with Sky, Sky+, SkyHD and other multimedia appliances (if you're not sure about compatibility between your appliances and Marmitek products, please contact us).

Applications

The Marmitek GigaVideo 70 transmits video from any source, e.g. satellite receiver, VCR, cable box, video camera, DVD, etc. It includes an IR remote control extender that allows you to control your equipment by using your IR/RF remote control or any remotes like the EasyControl 8. The IR-extender cable is equipped with 3 infrared LEDs. With these you can control up to 3 different A/V appliances through the IR return channel.

Technical info

Marmitek GIGAVIDEO 70 Transmitter:

• Power: 12V DC, 200 mA
• Transmitter: 4 channels
• Channel 1: 2.411 Ghz
• Channel 2: 2.434 Ghz
• Channel 3: 2.453 Ghz
• Channel 4: 2.473 Ghz
• Bandwidth: 18.0 Mhz
• Output: 10 mW max.
• A/V input: Mini DIN 3x Cinch (2x Audio, 1x Video)
• Modulation: FM
• Video input: 1 Vpp (typ) 75 Ohm
• Audio input: 1 Vpp (typ) 600 Ohm
• Dimensions: 92x85x140 mm with upright antenna

Marmitek GIGAVIDEO 70 Receiver:

• Power: 9V DC, 400 mA
• Receiver: 4 channels
• Channel 1: 2.411 Ghz
• Channel 2: 2.434 Ghz
• Channel 3: 2.453 Ghz
• Channel 4: 2.473 GHz
• A/V output: 3x Cinch (2x Audio, 1x Video)
• Video Output 1 Vpp (typ)
• Audio Output 1 Vpp (typ)
• Dimensions: 92x85x140 mm with upright antenna
• RF Output PAL BG Channel 36
• RF Output PAL I Channel 48

Brochure/Manual

 GigaVideo70 Brochure
 GigaVideo70 Manual

FAQ

Contacts

 
 
 EUR 59,95
 

Availability: 2-3 business days

Marmitek 09382 GigaVideo 70 Extra Receiver (Wireless Audio/Video)
Extra receiver for the GigaVideo 70 Kit.

Applications

With an extra Receiver you can extend the function of your GigaVideo 70 Kit by receiving the signal of the sender at more places in your house. Also ideal for presentations with more than one TV screen! The GigaVideo 70 receiver is standard equipped with an infrared extender feature and modulator.

Technical info

Marmitek GIGAVIDEO 70 Receiver

• Power: 9V DC, 400 mA
• Receiver: 4 channels
• Channel 1: 2.411 Ghz
• Channel 2: 2.434 Ghz
• Channel 3: 2.453 Ghz
• Channel 4: 2.473 GHz
• A/V output: 3x Cinch (2x Audio, 1x Video)
• Video Output 1 Vpp (typ)
• Audio Output 1 Vpp (typ)
• Dimensions: 92x85x140 mm with upright antenna
• RF Output PAL BG Channel 36

Brochure/Manual

 GigaVideo70 Brochure
 GigaVideo70 Manual

FAQ

Contacts

 
 
 EUR 39,95
 

Availability: 2-3 business days