Looking for a high quality alternative to X10’s TM13?

Our V572AE RF transceiver provides a professional alternative that not only receives all 256 X10 addresses, but also provides greater reception range and more custom control. Because the V572AE receives all 16 house codes, you can replace 16 normal TM13 transceivers with a single V572AE!

By offering this product with an external antenna and a state-of-the-art receiver, users are achieving impressive ranges with ordinary X10 transmitters like key chain remotes, motion sensors and palm pad remotes:


“I have set the unit on the floor in my entry way. I slowly converted all my wireless devices over to using it, and removing the various TM13 receivers around the house. My farthest outdoor sensor, a DM10, is down my driveway a bit, about 30 feet from the house. It could barely operate a TM13 placed outside in the breezeway, 25 feet from the receiver. With the V572AE, it is reliably working at a distance of almost 200' from the antenna, with the antenna sitting on the floor.”   -Nathan




“Just wanted to write to say a big "Thanks" for the V572AE. Incredible range... I installed it in our barn I'm finishing which is approx 500 ft from our house. I can turn on & off lights with our old X10 keychain remotes or keypad controller from inside the house with no problems at all. I was hoping for 200 or so foot range so this was a very pleasant surprise. It's not often that a product outperforms the specs advertised!”   -Frank Harrington

An internal 433.92MHz receiver detects incoming RF signals generated by X10 compatible remote devices: palm pad remotes, key chain remotes, HawkEye motion detectors, and many others. These signals are filtered by an optional user defined list of allowed house and unit codes.

The enabled signals are sent to a XM10E power line interface module which then broadcasts the X10 commands down the power line to receiving modules (X10 light switch modules, lamp modules, appliance modules, etc.).

Here is a schematic detailing the various components of a typical installation.

V572AE Features:

• Receives all 256 house/unit code addresses
  
• External antenna package for extreme range
  
• Custom house & unit code filtering via configuration program
  
• Filtering settings are not lost during power loss
  

If you have a dedicated computer you can use for home automation control, then you should look at using our W800RF32 receiver. For a W800RF32 - V572 comparison, Click here.