Applications

NYG1S is an YAGI directional antenna with a 9 dB gain. It can be used in place of a standard antenna, on any wireless camera or receiver.
The antenna can be aligned optically, thanks to its very wide field range (about 30° horizontally and vertically).

 

 EUR 51,43
  - 10%
 EUR 46,28
 

Availability: 2-3 business days

Applications

This antenna can be installed on VSE cameras and transmitters, providing an 6dB gain compared with the 3dB gain of the standard antenna. The transmission propagates on all directions (360°), like the standard antenna. It's a valid solution to enhance the range of all cameras and transmitters, when it's not possible to use a directional antenna because of its dimensions or when using two or more receivers in different directions.

Applications

Stabilized adaptor with switching technology which delivers more power with respect to its size, heat up less and regulate output more efficiently.
NAL4SS delivers 1A at 12VDC and is suitable for powering all VSE cameras with the exception of Speed Dome cameras, which require NAL5S adapter.
NAL4SS is the smallest 1A/12VDC adaptor available on the market today: only 40x25x33 mm. The compact size means it will fit into any casing or switching box. For further convenience the EU plug is removable.
The jack which connects to the device measures 5.5 mm in diameter (external) and 2.1 mm (internal). Positive central.

Applications

Switching Power Supply like NAL4SS, with higher power (3A). Suitable to enpower more devices, simultaneously. Complete of cable for connecting it to the power line.

Applications

Switching Power Supply like NAL4SS, but on printed circuit board. It's an 1A switching Power Supply, without any protection case. It's suitable to power more than one device and can be inserted in any box or case. It's mounted on a small printed circuit board (45x60 mm), with two pins to connect the 220VAC main power supply and a 5.5 mm jack to connect the 12VDC device. This power supply is ideal to be installed inside small junction boxes (i.e. 503), or inside the protective cases of the cameras. The small dimensions make it suitable also to power hidden cameras.

Applications

This power supply distribution box is ideal for powering several cameras with a single power source. It has 18 12VDC output for cameras and 1 AC input (from 100 to 240 VAC).
All outputs have a PTC protection against overload which, unlike fuses, does not need to be replaced.
ON/OFF main switch is also included.
The NAL10S power box comes in a metal casing suitable for wall mounting with cable holes.

Applications

Almost all VSE devices, including cameras, transmitters, receivers, etc, take a 12V DC power supply.
As well as being safer this means that the devices can also be battery powered. NPS35S is a battery pack which delivers 3.5Ah at 12VDC, and can be used with all VSE products. It can be used as the only source of power, for example with portable systems, or as a back-up power supply in the event of a power failure. It has a 12 VDC output jack which connects to the device, and an input for connecting the 220VAC/12VDC power adaptor (supplied) used for recharging. The battery pack can be used to power a device until it runs out of power, and then be connected to the power adaptor and recharged, or the battery unit can be connected between the mains power and the device, to ensure a power supply only in the event of a power failure. It recharges automatically when the mains power is On.
NPS35S has been specifically designed to be as light and compact as possible, while offering long run-time.
The product comes complete with power adaptor for connecting to the mains, with a LED indicator for charging status.

Applications

Cable for adding the audio microphone to a camera without audio. High-sensitivity microphone. 12VDC power supply. Camera side: power supply and Video; monitor side: power supply, Audio, Video. RCA connectors.

Applications

Cable to implement an independent audio listening spot. High-sensitivity microphone. 12VDC/10mA power supply. RCA audio connector. Audio output 2Vpp.

Applications

This 12x8 cm adhesive must be fixed behind a glass, tipically a shop windows, and it's visible from outdoor. It warns, with a phrase in plain English and an explanatory picture, that a CCTV system is installed and active.