Applications

This Pan/Tilt control lets you move your camera in one or more directions (right, left, up, down) using the Control console. The device is made with strong aluminum material, and it's suitable for indoor usage even in rooms with dust and adverse conditions. The camera, generally inserted in a protected case, is mounted on the device that's connected to the control console by a 6-wires cable (Up, Down, Right, Left, automatic Panoramic, Common power supply). The 6-poles connector is included in the package; the 220V power supply, used to control the motor, lets you connect a long cable without any appreciable power losses.

Applications

This Pan/Tilt unit offers functions similar to the NBR1S model but it's suitable for outdoor use without any protective case. Its robust sealed polycarbonate housing makes it entirely rain-proof, and resistant to temperatures from -25 to +60°C. The joint is very robust and can handle a maximum load of 25 kg.
For long durability in any environment, the body of this Pan/Tilt unit is made of special water-proof, fire-proof, UV-proof material. In addition all gears are made of medium carbon steel.
Like NBR1S, this Pan/Tilt head is also connected up to the control unit Control console with a 6 wire cable (UP, DOWN, RIGHT, LEFT, auto-Pan, power supply). A 6 pole connector is also supplied. The motor is connected to a 220V power supply, which means that long cables can be used without voltage drops.
The Pan and Tilt can be directly fixed to a surface, without any supports. If wall-mounted it requires NST4S bracket, which can be purchased separately.

Applications

This motorized movement, called SCANNER, lets you control the camera rotation in the horizontal direction (PAN) and it's suitable for indoor usage. The camera can be controlled directly, or installed inside a Case for indoor usage. A suitable joint can be used to incline the camera. The NBR3S scanner can be connected to the Control console by using a 4-wire cable (Left, Right, Pan auto, Common Ground). The motorized control is powered with 220V, so that it's suitable for long distance cabling, without any appreciable loss of voltage.
It's also possible to install the scanner without any control unit, simply connecting the 220V power supply to the wires named Pan Auto and Common Ground. In this manner, the camera will rotate constantly from right to left and viceversa letting you control a wider area with a single camera, inexpensively. Suitable limits let you adjust the Pan range, from few degrees up to 350°.

Applications

This control panel is used to operate 3-motor zoom lenses such as N636ZS and N660ZS and the pan and tilts NBR1S, NBR2S and NBR3S.
To control the motorized lens 6 wires are required (2xZoom + 2xDiaphragm(IRIS) + 2xFocus). The pan and tilt requires a further 6 (up, down, right, left, pan, common 220v). On the back of the control unit there is a 6 pole connector for the pan and tilt and a 6 position terminal board for the motorized lens.
On the front of the control unit there are 3 controls for zoom, diaphragm and focus, and a joy stick to move the pan and tilt in all directions. There is also an AUTO function switch for constant movement.
The control unit connects up to a 220V power supply and can also be fitted on a rack, if there is more than one pan and tilt camera to control, and more than one control units are required. The control unit can also be used to control the lens or pan and tilt separately.