FREE SHIPPING IN ITALY @ >149€

HOW TO ORDER CART CHECKOUT SHIPPING CONDITIONS ABOUT CONTACT IN MEMORIAM
HOME AUTOMATION > A10


NicoShop is Marmitek Preferred Partner
 NicoShop.com®, SINCE 2002 Leader in ON-LINE X-10 & INSTEON Home Automation, is Marmitek Authorized Distributor and Marmitek Preferred Partner. We offer the complete product range of Audio & Video at Home, Home Automation & Security, Video Door phones, IP Cameras. 

Formerly XanuraHome

XanuraHome™ Home Automation system

XanuraHome is a modular and very flexible house automation system based on the A10 protocol (X-10 fully compatible). As a result, it is possible to offer for each individual home a comfort that exactly suits the personal requirements of the residents.

XanuraHome makes home automation available to everybody

With XanuraHome, Eaton Holec and Marmitek have developed a new system that makes home automation available to everybody. The system, that has been specially designed for private consumers, is easy to install in both new and existing buildings. XanuraHome is the alternative to busbar systems in homes and, thanks to its unique concept, can be offered as a solution that exactly satisfies individual consumer requirements at a very attractive price.

How is that possible? Simply because XanuraHome can be applied in existing lighting networks and be operated with any type of switching device. As a result, demolition and hacking work is not necessary and installation and material costs are therefore greatly reduced. By fitting transmitting and receiving components behind switches and wall sockets so that they are invisible, switching commands can be sent over the existing lighting network. In addition, if alterations are required later, the XanuraHome system can be easily extended or modified.

Advantages of XanuraHome
  • Suitable for existing and new homes
  • No hacking and demolition work
  • Easy to install
  • Invisible when installed
  • Can be operated by any type of switching device
  • Simple to operate
  • Can be operated by switches, remote control via a PC or fully automated
  • Universal remote control device also suitable for TV, video and audio appliances
  • Can be used for lighting and various types of electrical appliances
  • Can optionally be operated via a PC with XanuraHome software
  • Easy to extend
01807552-A10-SVX10

More Views

  • 01807552-A10-SVX10


Marmitek 01807552 SVX10 Signal repeater (A10)

XanuraHome Micro Module.
  • Repeats all Xanura & Haibrain X10 commands
  • To be installed in a junction box
  • Can be used in single phase installations with low Xanura / Haibrain X10 signal levels where equipment filters are not satisfactory.
  • Amplifies Xanura / X10 signals to their maximum value.
  • The signal amplifier amplifies all letter codes as standard.
  • Can be set up to amplify a single or several letter codes.

Item #: 01807552-A10-SVX10

Availability: Usually ships in 3-4 days



EUR 75,83






 

Details

Built-in module for the single phase amplification of Xanura Marmitek X10 signals. The Xanurahome SVX10 is a signal repeater that forwards reinforced signals in single-phase systems. The LED is ON all the time when in operating mode. The LED flashes when Xanura / X10 signals are received and amplified.
The SVX10 only works if the original signal level in the fuse compartment is at least 100 mV. Each letter code for a building can only be amplified by one signal amplifier.

  • The signal amplifier must be mounted in a junction box or welding box. The signal amplifier must be protected by a 16 A automatic fuse or fuse link.
  • Each letter code for a building can only be amplified by one signal amplifier.
  • Connect the phase and neutral wire to the terminals on the signal amplifier, see Figure 1 of the manual
  • Program the module if it has not already been programmed, or has been programmed incorrectly.

Specs

  • Supply voltage : 230 V, 50 Hz

Manuals

Brochure XanuraHome Brochure
Manual XanuraHome SVX10 Manual
Manual XanuraHome Micromodules Manual
Manual XanuraHome Micromodules capacity reduction of dimming actuators Manual

FAQ

Warning

WARNING: Not to be used in conjunction with the FKX40 Phase Coupler/Repeater!

Contacts

 
01807605-A10-FKX40

More Views

  • 01807605-A10-FKX40


Marmitek 01807605 FKX40 Phase Coupler/Repeater (A10)

XanuraHome Din-Rail module.
  • The phase coupler must be connected to a 16 A 3-phase group

Item #: 01807605-A10-FKX40

Availability: Usually ships in 3-4 days



EUR 231,66






 

Details

The phase coupler/repeater receives Marmitek X-10 commands and forwards these commands to all phases. All commands are repeated when passing the phase coupler.

Specs

  • Rated voltage : 3-phase, 230 Vac, 50 Hz
  • Total power consumption : < 2 W
  • Signal transmission : > 5 Vpp in 5 Ohm at 120 kHz
    in accordance with EN 50065-1, EN 50065-2-1, EN 50065-4-1
  • Transmission synchronization : 1 pulse burst at 0°/180°
  • Signal sensitivity : 25 mVpp…6 Vpp at 120 kHz ± 4 kHz
  • Signal/noise ratio : 1,35 : 1
  • Connection range : 2.5 mm2 solid
  • Minimum ambient temperature : 0 °C
  • Maximum ambient temperature : 40 °C
  • Atmospheric pressure : 86 hpA - 106 hpA
  • Relative humidity (non condensing) : 30 tot 90%
  • Housing: IP40 according to IEC 60 529
  • Terminal contact: IP20 according to IEC 60 529
  • Colour : RAL 7035

Manuals

Brochure XanuraHome Brochure
Manual XanuraHome FKX40 Manual

FAQ

Warning

WARNING: Not to be used in conjunction with the SVX10 Signal repeater!

Contacts

 
06004685-A10-RFIX35

More Views

  • 06004685-A10-RFIX35


Marmitek 06004685 RFIX35 RF Interface (A10)

XanuraHome RF Interface with RF-secured function.
  • Makes the Haibrain X10 system operable remotely via RF
  • Easy to install
  • Designed as a wall- or ceiling mountable unit or stand-alone use
  • A maximum of 256 addresses can be controlled with one RF interface
  • RF-secured, only signals from registered remote control units are accepted
  • A maximum of eight remote control units can be registered in the RF-secured mode
  • Maximum communication distance: 100 m (open field)
  • Dimensions: 120 x 80 x 30 mm
  • Color: RAL 9001

Item #: 06004685-A10-RFIX35

Availability: Usually ships in 3-4 days



EUR 157,77






 

Details

The Xanura RFIX35 can be used to receive RF-commands from XanuraHome / X10 remote controls and send them over the power line to switch or dim actuators.

The RF interface is a receiver that converts RF signals originating from the Marmitek X-10 remote control units into Marmitek X-10 commands and subsequently sends them over the lighting circuit.

The RFIX35 makes wireless and remote operation of the Marmitek X10 system possible. The RF interface can be mounted on a junction box or against a distribution box, but can also be mounted against the rear wall of the meter cabinet, if required. The RFIX35 can also be plugged into a wall socket outlet.

Specs

  • Mains voltage : 230 Vac, 50 Hz
  • Max. power consumption : <2 W
  • Ambient temperature : 0 to 40 °C
  • Frequency : 433,92 MHz; X-10 RF (NEC) compatible protocol
  • Max communication distance : 100 m (open field)
  • Protection class : Class II, Double insulated
  • Type of protection : IP 40 with installation on the wall or ceiling - IP 20 with installation on the wall.
  • Standards: IEC 60950
Housing
  • Dimension (H x W x D) : 120 x 80 x 30 mm
  • Color : RAL9001
Power cable
  • Dimension : Length 1.5 m
  • Color : White

Manuals

Brochure XanuraHome Brochure
Manual XanuraHome RFIX35 Manual

FAQ

Contacts

 
01807553-A10-SAX35

More Views

  • 01807553-A10-SAX35


Marmitek 01807553 SAX35 Potential free actuator/interface (A10)

XanuraHome Surface-mounted module.
  • Two inputs and one output (potential free and galvanically separated)
  • Sends ON/OFF commands (max. two addresses)
  • Receives ON/OFF commands and switches the built-in relay contact (max. 5 A, 30 V)
  • Can be incorporated in a group command
  • Automatic status indication possible
  • Status request possible

Item #: 01807553-A10-SAX35

Availability: Usually ships in 3-4 days



EUR 168,86






 

Details

The SAX35 is a potential free actuator/interface in a surface-mounted housing. The SAX35 can be used to switch appliances of other manufacturers on the basis of an input contact (max. 5A, 30 V a.c./d.c.). Examples include: a doorbell, electronic lock or heating systems (24 V a.c.). The SAX35 can be installed with the appliance to be connected. The SAX35 communicates with the rest of the system via the lighting circuit. Ideal in situations where there are no leads from the appliance to the meter cabinet.

Specs

  • Nominal supply voltage : 230 V, 50Hz
  • Current consumption : <35 mA
  • Input voltage isolation : 3 kV
  • Clearance and creepage distance prim/sec. :> 5 mm
Galvanically separated connections
Secondary connection terminals
  • Input 1 : Binary (high: V+; low: <+1 V )
  • Input 2 : Binary (high: V+; low: <+1 V )
  • Common (V+) : + 5 V … + 25 V, AC or DC
  • Input current : <7,5 mA
  • Relay contact output : potential-free and galvanically separated relay contact, mono stable normally open
  • Relay contact current : <5 A resistive
Voltage
  • Relay contact/inputs : <30 V
  • Standards : EN 60950
  • Signal strength sending :> 5 Vpp in 5 Ohm
  • Signal sensitivity : 15 mVpp min,> 50 mVpp at 120 kHz

Manuals

Brochure XanuraHome Brochure
Manual XanuraHome SAX35 Manual

FAQ

Contacts

 
01807604-A10-PMIX35

More Views

  • 01807604-A10-PMIX35


Marmitek 01807604 PMIX35 Programming and Measuring Interface (A10)

XanuraHome Programming and Measuring Interface.
  • Sending and receiving commands.
  • Measuring the signal level and noise level of incoming messages.
  • Measuring network impedance.
  • Sending messages with quick-selection buttons.
  • Sending messages with two preset macros.
  • Running macros automatically.
  • Sending messages with adjustable transmission levels.
  • Logging of received and sent messages with error analysis.
  • Easily accessible network diagnostic information.
  • Automatic programming of modules at the touch of a button.
  • Network validation measuring method with reporting for the reliable delivery of new installations.
  • Support for the PMIX35 ASCII protocol similar to the CTX15/35 protocol.
  • Support for the CTX15/35 protocol.

Item #: 01807604-A10-PMIX35

Availability: Usually ships in 3-4 days



EUR 277,22






 

Details

PMIX35 - Programming and Measuring Interface (E plug).

Model: 1807604

The Programming and Measuring Interface from Marmitek® is a power line communication interface designed to support the standard and extended X10 protocols. In addition, the system enables you to examine the lighting circuit, isolate any disturbances with a filter and test installed modules immediately.

Features:

  • Sending and receiving commands
  • Technical problems in installations can be quickly localised and resolved
  • New installation can be tested for reliability
  • Modules can be quickly and easily programmed

The Programming and Measuring Interface is a 230V mains powered system, and is supplied with an E-plug (also available with an U-plug).

PMIX35 - Network analyzer
PMIX35 - Network analyzer

PMIX35 - 10 PLC programmer
PMIX35 - 10 PLC programmer

Specs

TECHNICAL DATA
  • Rated voltage 230 Vac, 50 Hz
  • Total power consumption Max. 2.5 W
  • Signal transmission Adjustable from 0 to 5 Vpp (per 25 mV) in 5 ? at 120 kHz according to EN 50065-1, EN 50065-2-1, EN 50065-4-1
  • Transmission regulation: Transmission level adjusts itself automatically to the power line impedance. The maximum adjustable level is 5 Vpp.
  • Transmission synchronisation 1 pulse burst at 0°/ 30°/ 60°/ 90°/ 120°/ 150° selectable
  • Signal sensitivity: 25 mVpp-6 Vpp at 120 kHz ± 4 kHz
  • Signal/noise ratio 1.35 : 1
  • Minimum ambient temperature 0°C
  • Maximum ambient temperature 40°C (*)
  • Atmospheric pressure 86 pkA - 106 pkA
  • Relative humidity (non condensing) 30 to 90%
  • Standards NEN-EN-IEC 60669-2-1, NEN-EN-IEC 60669-2-2

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Kit contents:
  • 1x PMIX35
  • 1x USB cable
  • 1x Cd-rom with: PMIX35 software + PDF userguide (PMIX35) + Quick reference guide

Manuals

Brochure XanuraHome Brochure
Manual XanuraHome PMIX35 Manual
Manual PMIX35 Quick Reference Guide

Software

PMIX35 Windows XP-Server-2003-Vista-7-8 (v6.6)

             CTX35 Test Software              

       PMIX35 Linux (2.6.x and 2.4.36)        

         PMIX35 Macintosh OSX (v3.0)          

           PMIX35 Network Analyzer

FAQ

Contacts

 
Shop with Confidence

ARTICLES


Marmitek 01807552 SVX10 Signal repeater (A10)
 

Marmitek 01807605 FKX40 Phase Coupler/Repeater (A10)
 

Marmitek 06004685 RFIX35 RF Interface (A10)
 

Marmitek 01807553 SAX35 Potential free actuator/interface (A10)
 

Marmitek 01807604 PMIX35 Programming and Measuring Interface (A10)
 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
 
Customer Care
Contact us
Mon-Fri 9:00am - 6:00pm GMT+1
Sat 9:00am - 1:00pm GMT+1

Paypal  Visa  MasterCard  American Express  Diners  Carta Aura  Visa Electron  PostePay
Copyright 2002-2018 Nicoshop®
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP