FGHC2


Z-Wave Fibaro Home Center 2 FGHC2 (Z-Wave Controllers)

Central managing unit for Fibaro System.
  • Ultra low energy consumption
  • Remote access via web page or mobile phone
  • Simple, user-friendly interface
  • Fast and simple configuration
  • Geo localization – tracking Your family members
  • SMS notification
  • Manageable users’ rights
  • Various devices’ associations
  • Conditioning scenes depending on weather or other, user-defined variables
  • Advanced recovery system
  • System backup is always saved on attached pen drive, hidden in the casing
  • History of events
This device may be used with all devices certified with Z-Wave certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGHC2

Availability: 2-3 business days



EUR 595,00






Album 

Details

Extremely efficient hardware architecture = fastest device of the type in the World.

Model: Home Center 2

To start using Fibaro System Home Center 2, please connect the device to power and LAN sockets.

Connect power cable to the mains, and network cable to LAN socket in your router (Home Center 2 requires an outside router).

Start HC2 with a POWER button and wait approx. 2 minutes for the device to start. Correct connection will be signalled by diodes.

Go to www.fibaro.com, find Support section, download and install HC2 Finder designated for your operating system.

Start the HC2 Finder and click "Refresh". After the list of Home Center 2, available within your local network appears, choose the one you wish to connect and click "connect".

After successful connection you will access HC2 control panel. Choose your language version, enter user name and password. Defaults are: admin / admin.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGHCL


Z-Wave Fibaro Home Center Lite FGHCL (Z-Wave Controllers)

Feature packed tiny, powerful Z-Wave home gateway to communicate.
  • Extremely efficient, optimized hardware architecture
  • Ultra low energy consumption
  • Remote access via web page or mobile phone
  • Simple, user friendly interface
  • Fast and simple configuration
  • Geo localization – tracking Your family members
  • Manageable users’ rights
  • Various devices’ associations
  • Conditioning scenes depending on weather or other, user-defined variables
  • Advanced recovery system
  • System backup is always saved on cloud service
  • History of events
This device may be used with all devices certified with Z-Wave certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGHCL

Availability: out of stock



EUR 279,00






Album 

Details

Extremely efficient, optimized hardware architecture.

Model: Home Center Lite

When working on the FIBARO System’s central unit, we favored simple configuration. We were very much concerned with safety. Therefore, during the installation process, the device being added always has to be within reach of the central unit. This way you can be sure that the device adding process will be successful. The central unit is portable.

Adding a new device comes down to a given module being detected by the central unit, named and assigned to a given room.

Compatibility

As has been mentioned, the FIBARO System is compatible with all the certified Z-Wave devices. However, in order to increase the system's potential, we are currently working on inter-system gates, to enable our system to cooperate with other systems based on different popular technologies.

We are improving the integration process, in order to make the FIBARO System compatible with the majority of systems available on the market. This way the users of other systems are able to extend them using the FIBARO modules.

We developed, a module which allow integration with the majority of alarm systems, both wired and wireless. Once such a module is installed, the FIBARO System will automatically recognize the alarm systems installed in our Customers’ houses.

This way the sensors in the existing alarm systems are be used to expand the FIBARO System's intelligence at no additional cost. Moreover, the system does not require a VPN connection or a static IP address for remote access.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGGC-001


Z-Wave Fibaro Swipe FGGC-001 (Z-Wave Controllers)

Control your home with a swipe of your hand!
  • Compatible with any Z-Wave or Z-Wave+ Controller.
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption.
  • Allows contactless gesture detection.
  • Battery and/or VDC powered. When connected to an external, VDC power source, the battery serves as an emergency power source.
  • Gestures and actions are confirmed by the buzzer and can be indicated additionally by the built-in LED diode.
  • Gesture controlled menu – allows to operate the device without dismounting it.
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
FIBARO Swipe is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Item #: FGGC-001

Availability: out of stock



EUR 149,00

Fibaro Swipe FGGC-001




Album 

Details

Control your home with a swipe of your hand!

Model: Swipe

FIBARO Swipe is a revolutionary battery gesture control pad that allows you to control devices in your Z-Wave network without actually touching anything. Swipe up, down, left, right, make a circular gesture and use sequences to get full and intuitive control of your home.

Designed to delight

Installed device perfectly matches your interior design, as it resembles a picture frame. You can even personalize it with your favourite picture. Gesture controlled menu allow to add/remove or reset the device without dismounting it.

The device is equipped with a buzzer that confirms performed gestures and other actions.

Discover the power of gestures

The Fibaro Swipe is equipped with the most precise 3D motion detecting sensor of its kind, which ensures flawless recognition of hand gestures.
It presents a new and innovative way of controlling your Z-Wave home automation devices and scenes in an intuitive and user friendly way.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGPG-101-ZW5


Z-Wave Fibaro The Button FGPG-101 ZW5 - FGK-107 ZW5 (Z-Wave Controllers)

Control your home with the push of a Button!
  • Compatible with any Z-Wave or Z-Wave+ Controller.
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption.
  • Completely wireless with battery power and Z-Wave communication.
  • May be installed anywhere in your home.
  • Extremely easy installation – simply add and put on desired surface.
  • Many colour variations: white, black, red, yellow, green, blue, brown and orange.
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Item #: FGPG-101-ZW5

Availability: 2-3 business days



EUR 54,99

Fibaro The Button




Album 

Details

Control your home with the push of a Button!

Model: FGPG-101-1…FGPG-101-8 The Button

FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device. It allows you to control devices through the Z-Wave network and run various scenes defined in FIBARO System.

Different actions may be triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.

With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.

Specs

TECHNICAL DATA
  • Battery type: ER14250 1?2AA 3.6V (same as in the Fibaro Door/Window Sensor)
  • Battery life: est. 2 years (with default settings and max. 10 pushes per day)
  • Operating temperature: 0 - 40°C
  • EU standards compliance: EMC 2014/30/EU, RED 2014/53/EU, RoHS 2011/65/EU,LVD 2014/35/EU
  • Radio protocol: Z-Wave (500 series chip)
  • Radio frequency: 868.4 or 869.8 MHz EU
  • Range: up to 50m outdoors, up to 40m indoors (Depending on terrain and building structure)
  • Dimensions (diameter x height): 46 x 34 mm
Using batteries other than specified may result in explosion. Dispose of properly, observing environmental protection rules.
Radio frequency of individual device must be same as your Z-Wave controller. Check information on the box or consult your dealer if you are not sure.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP