2443-422-MIC-RELAY


Haibrain INSTEON 2443-422 Relay Micromodule (INSTEON Micromodules)

Relay Micromodule for lights and appliances.
  • Add INSTEON on/off remote control without replacing your existing switch
  • Installs behind existing latching, single momentary or dual momentary switch
  • Sense wiring retains local control at the switch
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2443-422-MIC-RELAY

Availability: in stock



EUR 69,99






Album Insteon Forum Insteon Developer Program

Details

Insteon Appliance MicroModule, ON/OFF (230V, max 3600W).

Model: 08716

The Micro ON/OFF Module from Insteon enables you to control your lights/devices (up to 3600W) remotely!

The MicroModule should be connected to your (230V) mains and mounted in a wall- or junction box. This enables you to control your lights using an INSTEON controller (through INSTEON commands via the mains) or manually with the switch.

The Micro ON/OFF Module is compatible with your existing latching, single momentary or dual momentary switches.

In case you would prefer a MicroModule with the ability to dim lights, we recommend the Micro Dimmer Module.

Micro On/Off Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON: Controller and responder
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • Status LED:
    • Green when load is on, red when load is off
    • Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software)
    • Blinks green or red during setup
    • Blinks red to indicate traffic (must be enabled via software)
  • LED brightness: Adjustable from off to 100% bright
  • Local control: Yes
  • Commands supported as controller:
    • On/Off
    • Fast on/Fast off
    • Begin brighten/End brighten
    • Begin dim/End dim
  • Commands supported as responder:
    • On/Off
    • Fast on/Fast off
    • Beep
  • Software configurable: Yes
  • RF range: 150 feet (50 meters) open air (may vary due to local interference)
  • Phase detect beacon: Yes
  • X10 support: Yes
  • X10 addresses: Any 1 of 256 (unassigned by default)

Mechanical

  • Mounting: Behind switch or above light fixture in single-gang electrical box
  • Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm
  • Sense 2 (purple): 24 AWG, 0.205mm
  • Max. cable size: 4mm, 12 AWG (2.72mm diameter)
  • Min. cable size: 1.5mm, 15 AWG
  • Screw clamp connections:
    • Line
    • Load 1
    • Load 1, second terminal
    • Neutral
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized ABS+PC
  • Beeper: Yes
  • Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software)
  • LED: 1 RGB
  • Dimensions: 46.6mm H x 46.6mm W x 17.5mm D
  • Weight: 71.5g
  • Operating environment: Indoors

Electrical

  • Voltage: 100VAC to 240VAC
  • Frequency: 50/60Hz auto-detected at power-up
  • Max. load:
  • Load types: Resistive, Inductive / Capacitive, Low voltage halogen
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retain all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: <1W
  • Safety approved: ETL, CE, C-Tick
  • Certifications:
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2442-422-MIC-DIMMER


Haibrain INSTEON 2442-422 Dimmer Micromodule (INSTEON Micromodules)

Dimmer Micromodule for lights.
  • Add INSTEON dimmable remote control without replacing your existing switch
  • Installs behind existing latching, single momentary or dual momentary switches
  • Sense wiring retains local control at the switch
  • Programmable on-level and fade on/off speed
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance
  • X10 Compatible

Item #: 2442-422-MIC-DIMMER

Availability: in stock



EUR 69,99






Album Insteon Forum Insteon Developer Program

Details

Insteon Lamp-/dimmer module, MicroModule, ON/OFF/DIM (230V, max 200W).

Model: 08715

The Micro Dimmer Module from Insteon transforms your existing switch into an Insteon controllable switch!

This module offers, besides the ON/OFF option, the ability to dim your lights! The integrated dimmer features 32 dim levels.

The MicroModule should be connected to your (230V) mains and mounted in a wall- or junction box. This enables you to control your lights using an INSTEON controller (through INSTEON commands via the mains) or manually with the switch.

In case you would prefer a MicroModule without the ability to dim lights, we recommend the Micro On/Off Module.

Micro Dimmer Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON: Controller and responder
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • Status LED:
    • Green when load is on, red when load is off
    • Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software)
    • Blinks green or red during setup
    • Blinks red to indicate traffic (must be enabled via software)
  • LED brightness: Adjustable from off to 100% bright
  • Local on-level: Adjustable from 32 fixed brightness levels or resume dim
  • Local ramp rate: Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 9 minutes with software)
  • Local control: Yes
  • Commands supported as controller:
    • On/Off
    • Fast on/Fast off
    • Begin brighten/End brighten
    • Begin dim/End dim
  • Commands supported as responder:
    • On/Off
    • Fast on/Fast off
    • Begin brighten/End brighten
    • Begin dim/End dim
    • Incremental brighten/Incremental dim
    • Beep
  • Software configurable: Yes
  • RF range: 150 feet open air (may vary due to local interference)
  • Phase detect beacon: Yes
  • X10 support: Yes
  • X10 addresses: Any 1 of 256 (unassigned by default)

Mechanical

  • Mounting: Behind switch or above light fixture in single-gang electrical box
  • Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm
  • Sense 2 (purple): 24 AWG, 0.205mm
  • Max. cable size: 4mm, 12 AWG (2.72mm diameter)
  • Min. cable size: 1.5mm, 15 AWG
  • Screw clamp connections:
    • Line
    • Load
    • Neutral 1
    • Neutral 2
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized ABS+PC
  • Beeper: Yes
  • Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software)
  • LED: 1 RGB
  • Operating environment: Indoors

Electrical

  • Voltage: 100VAC to 240VAC
  • Frequency: 50/60Hz auto-detected at power-up
  • Min. load:
    • 5W at 240VAC
    • 5W at 120VAC
  • Max. load:
    • 200W at 240VAC
    • 100W at 140VAC
  • Load types: Incandescent
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retain all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: <1W
  • Safety approved: ETL, CE, C-Tick
  • Certifications:
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2444-422-MIC-SHUTTER


Haibrain INSTEON 2444-422 Shutter Micromodule (INSTEON Micromodules)

Shutter Micromodule for blinds and curtains.
  • Add INSTEON remote control to motor-controlled shutters, blinds, projector screens and more
  • Installs behind existing switch
  • Sense wiring retains local control at the switch
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2444-422-MIC-SHUTTER

Availability: in stock



EUR 69,99






Album Insteon Forum Insteon Developer Program

Details

Insteon Micro Open / Close (i.e. Sunblinds).

Model: 08717

The Micro Open/Close Module from Insteon is specifically designed for two-direction motorized devices. The module enables you to control motorised (230V) shutters, blinds, projector screens, and more remotely!

The MicroModule should be connected to your (230V) mains and mounted in a wall- or junction box. To enable manual control, the module should be linked to a switch. This system is compatible with latching, single momentary and dual momentary switches.

The Micro Open/Close Module can be controlled manually or remotely with INSTEON commands through the mains (existing wiring) and RF.

Micro Open/Close Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON: Controller and responder
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • Status LED:
    • Green when load is on, red when load is off
    • Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software)
    • Blinks green or red during setup
    • Blinks red to indicate traffic (must be enabled via software)
  • LED brightness: Adjustable from off to 100% bright
  • Local control: Yes
  • Commands supported as controller:
    • On/Off
    • Fast on/Fast off
    • Begin brighten/End brighten
    • Begin dim/End dim
  • Commands supported as responder:
    • Open (On)/Close (Off)
    • Begin raise (brighten)/Begin lower (dim)
    • End raise (brighten)/End lower (dim)
    • Beep
  • Software configurable: Yes
  • RF range: 150 feet (50 meters) open air (may vary due to local interference)
  • Phase detect beacon: Yes
  • X10 support: Yes
  • X10 addresses: Any 1 of 256 (unassigned by default)

Mechanical

  • Mounting: Behind switch or above light fixture in single-gang electrical box
  • Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm
  • Sense 2 (purple): 24 AWG, 0.205mm
  • Max. cable size: 4mm, 12 AWG (2.72mm diameter)
  • Min. cable size: 1.5mm, 15 AWG
  • Screw clamp connections:
    • Line
    • Load 1 (up)
    • Load 2 (down)
    • Neutral
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized ABS+PC
  • Beeper: Yes
  • Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software)
  • LED: 1 RGB
  • Dimensions: 46.6mm H x 46.6mm W x 17.5mm D
  • Weight: 71.5g
  • Operating environment: Indoors
  • Operating temperature range: 0 to 40C
  • Operating humidity range: 0-90% relative humidity
  • Storage temperature range: -20 to 70C

Electrical

  • Voltage: 100VAC to 240VAC
  • Frequency: 50/60Hz auto-detected at power-up
  • Load types: Resistive, Inductive / Capacitive, Low voltage halogen, Motor
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retain all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: <1W
  • Safety approved: ETL, CE, C-Tick
  • Certifications:
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP