FGS-213-ZW5


Z-Wave Fibaro FGS-213 Single/Double Switch 2 (Z-Wave Micromodules)

The Z-Wave Fibaro Relay Switch 1x2,5kW allows you to control an electrical load up to 2,5 KW both via Z-Wave wirelessly and locally.
  • Compatible with any Z-Wave Controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Advanced microprocessor control
  • Active power and energy metering functionality
  • Works with various types of switches momentary, toggle, three-way, etc
  • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
  • FIBARO Switch 2 is an extension unit
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
FIBARO Flood Sensor with firmware 3.2 or higher is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Item #: FGS-213-ZW5

Availability: 2-3 business days



EUR 64,95

Fibaro FGS-213 Single Switch 2




Album 

Details

The Z-Wave Fibaro Relay Switch 1x2,5kW allows you to control an electrical load up to 2,5 KW both via Z-Wave wirelessly and locally.

Model: FGS-213 ZW5 Z-Wave Plus Fibaro Single Switch 2

FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
FIBARO Switch 2 comes in two versions:

  • Single Switch 2 (FGS-213) can control one electric device
  • Double Switch 2 (FGS-223) can control two electic devices

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGD-212-ZW5


Z-Wave Fibaro FGD-212 ZW5 Dimmer 2 (Z-Wave Micromodules)

Wireless Z-wave Plus dimmer that recognizes the type of connected light source.
  • Compatible with any Z-Wave or Z-Wave+ Controller
  • Advanced microprocessor control
  • Implemented algorithm of smart light source detection
  • Auto-adjustment of the appropriate control mode to connected load
  • Active power and energy metering functionality
  • Soft start function
  • Memory of the last lighting level settings
  • Works with various types of switches momentary, toggle, three-way, etc.
  • Active element: semiconductor electronic switch
  • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
  • FGD-212 is an extension unit
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGD-212-ZW5

Availability: 2-3 business days



EUR 59,95






Album 

Details

Wireless Z-wave Plus dimmer that recognizes the type of connected light source.

Read the manual before attempting to install the device!

Failure to observe recommendations included in this manual may be dangerous or cause a violation of the law. The manufacturer, Fibar Group S.A. will not be held responsible for any loss or damage resulting from not following the instructions of operating manual.

Danger of electrocution!

Dimmer 2 is designed to operate in electrical home installation. Faulty connection or use may result in fire or electric shock.

All works on the device may be performed only by a qualified and licensed electrician. Observe national regulations.

Even when the device is turned off, voltage may be present at its terminals. Any maintenance introducing changes into the configuration of connections or the load must be always performed with disabled fuse.

Required overcurrent protection

Dimmer 2 must be protected with an overcurrent protection (fuse) with a value not higher than 10A.

Model: FGD-212 Dimmer 2

Remotely controlled light dimming module FIBARO Dimmer 2 is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.

New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGR-222-ZW5


Z-Wave Fibaro FGR-222 ZW5 Roller Shutter 2 (Z-Wave Micromodules)

Controller for all blinds, awnings, garage doors and gates.
  • Compatible with any Z-Wave Controller
  • Advanced microprocessor control
  • Executive element electromagnetic, micro-gap relay switch
  • Works with various types of switches momentary, toggle and dedicated roller blind switches
  • Active power and energy metering functionality
  • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGR-222-ZW5

Availability: 2-3 business days



EUR 59,95






Album 

Details

Controller for all blinds, awnings, garage doors and gates.

Read this manual before attempting to install the device!

Failure to observe recommendations included in this manual may be dangerous or cause a violation of the law. The manufacturer, Fibar Group S.A. will not be held responsible for any loss or damage resulting from not following the instructions of operating manual.

Danger of electrocution!

The device is designed to operate in electrical home installation. Faulty connection or use may result in fire or electric shock.

All works on the device may be performed only by a qualified and licensed electrician. Observe national regulations.

Even when the device is turned off, voltage may be present at its terminals. Any maintenance introducing changes into the configuration of connections or the load must be always performed with disabled fuse.

Required overcurrent protection

The device must be protected with an overcurrent protection (fuse) with a value not higher than 10A.

Escape route

It is not recommended to operate all of the roller blinds simultaneously. For safety reasons, at least one roller blind should be controlled independently, providing safe escape route in case of emergency.

Maintenance

It is recomended to monitor regulary operation of FIBARO Roller Shutter 2 in all modes. In case of gate control mode device, motor limit switches, infrared barriers and emergency stop should be monitored and maintained regulary.

Model: FGR-222 Roller Shutter 2

FIBARO Roller Shutter 2 is a module designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices. FIBARO Roller Shutter 2 allows precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring.

As with all other Actors, FIBARO Roller Shutter 2 allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGRGBWM-441


Z-Wave Fibaro FGRGBWM-441 Controller (Z-Wave Micromodules)

Fibaro RGBW Controller may control LED strips, RGB / RGBW LEDs and 12V - 24V powered light sources.
  • Compatible with any Z-Wave Controller
  • Advanced microprocessor control
  • Different operating modes
  • Active power and energy metering functionality
  • Multiple colour presets
  • Active element: transistor
  • To be installed in standard wall switch boxes
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGRGBWM-441

Availability: 2-3 business days



EUR 59,95






Album 

Details

Universal, Z-Wave compatible RGB / RGBW controller.

Model: FGRGBWM-441 Controller

FIBARO RGBW Controller is a universal, Z-Wave compatible RGB/RGBW controller. FIBARO RGBW Controller uses PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. In addition the device supports up to four, 0V 10V analog sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGS-222


Z-Wave Fibaro FGS-222 Double Relay Switch 2x1,5kW (Z-Wave Micromodules)

Radio controlled Fibaro Double On/Off Relay Switch.
  • Compatible with any Z-Wave Controller
  • Advanced microprocessor control
  • Executive element electromagnetic, micro-gap relay switch
  • May be oparated by momentary or toggle switches
  • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGS-222

Availability: 2-3 business days



EUR 59,95






Album 

Details

Radio controlled Fibaro Double On/Off Relay Switch.

Read this manual before attempting to install the device!

Failure to observe recommendations included in this manual may be dangerous or cause a violation of the law. The manufacturer, Fibar Group S.A. will not be held responsible for any loss or damage resulting from not following the instructions of operating manual.

Danger of electrocution!

The device is designed to operate in electrical home installation. Faulty connection or use may result in fire or electric shock.

All works on the device may be performed only by a qualified and licensed electrician. Observe national regulations.

Even when the device is turned off, voltage may be present at its terminals. Any maintenance introducing changes into the configuration of connections or the load must be always performed with disabled fuse.

Required overcurrent protection

The device must be protected with an overcurrent protection (fuse) with a value not higher than 10A.

Model: FGS-222 Relay Switch 2x1,5kW

FIBARO Roller Shutter 2 is a module designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices. FIBARO Roller Shutter 2 allows precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring.

As with all other Actors, FIBARO Roller Shutter 2 allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGS-212


Z-Wave Fibaro FGS-212 Relay Switch 1x2,5kW (Z-Wave Micromodules)

Control an electrical load up to 2,5 KW both via Z-Wave wirelessly and locally.
  • Compatible with any Z-Wave Controller
  • Advanced microprocessor control
  • Executive element electromagnetic, micro-gap relay switch
  • May be oparated by momentary or toggle switches
  • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGS-212

Availability: 2-3 business days



EUR 59,95






Album 

Details

Control an electrical load up to 2,5 KW both via Z-Wave wirelessly and locally.

Read this manual before attempting to install the device!

Failure to observe recommendations included in this manual may be dangerous or cause a violation of the law. The manufacturer, Fibar Group S.A. will not be held responsible for any loss or damage resulting from not following the instructions of operating manual.

Danger of electrocution!

The device is designed to operate in electrical home installation. Faulty connection or use may result in fire or electric shock.

All works on the device may be performed only by a qualified and licensed electrician. Observe national regulations.

Even when the device is turned off, voltage may be present at its terminals. Any maintenance introducing changes into the configuration of connections or the load must be always performed with disabled fuse.

Required overcurrent protection

The device must be protected with an overcurrent protection (fuse) with a value not higher than 10A.

Model: FGS-212 Relay Switch 1x2,5kW

FIBARO Relay Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control an electric device drawing up to 2500W.
As with all other Actors, FIBARO Relay Switch allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP