2633-432-PLG-RELAY


Haibrain INSTEON 2633-432 Plug-in On/Off Module (INSTEON Plug.in modules)

INSTEON On/Off Module - Germany Schuko plug (Europe 869 MHz).
  • Integrated on/off relay
  • Compatible with all INSTEON (and X10) controllers; can also act as an INSTEON (and X10) controller
  • Super-easy setup with multi-color LED and beeper
  • Dual-band communicates simultaneously over both RF and powerline
  • Stores setup state in non-volatile memory so settings aren’t lost during power outages

Item #: 2633-432-PLG-RELAY

Availability: in stock



EUR 51,99






Album Insteon Forum Insteon Developer Program

Details

Insteon Appliance module, plug-in, on / off (G Plug).

Model: 08703

Connecting devices to your INSTEON home automation system has never been so easy! The plug-in module from Insteon is home automation at its simplest and most convenient.

To enable the plug-in module to receive INSTEON commands, the module should be connected to your 230V mains. Installation will only take a few seconds, simply place the plug-in module between your socket and your device.

After installation your are able to operate (ON/OFF) your device/light remotely with an INSTEON controller and manually with the switch mounted on the side of the module.

This model is supplied with an G-plug (also available with an F-plug or U-plug).

If you prefer a plug-in module with a DIM option, we recommend the Insteon Dimmer Module.

Specs

TECHNICAL DATA

INSTEON

  • INSTEON powerline mesh repeater: Yes
  • INSTEON RF mesh repeater: Yes
  • INSTEON controller: Yes
  • INSTEON responder: Yes
  • Maximum links/scenes: 400

LED

  • Beep on button press: Beeps when button is pressed (must be enabled via software)
  • LED brightness: Adjustable, from off to bright
  • Local control: Yes
  • Led signals:
    • Green: when load is on, red when load is off
    • Blinks green once: when all responders acknowledge (can be disabled via software)
    • Blinks red once: if responder does not acknowledge
    • Blinks red or green: during setup
    • Blinks red: to indicate traffic (must be enabled via software)
  • Beep on button press: Beeps when button is pressed (must be enabled via software)
  • LED brightness: Adjustable, from off to bright
  • Local control: Yes
  • Commands supported as controller:
    • On / Off
    • Fast-on / Fast-off
    • Begin brighten / Begin dim
    • End brighten / End dim
  • Commands supported as responder
    • On / Off
    • Fast-on / Fast-off
    • Beep
  • Software configurable: Yes
  • RF range: Up to 50 meters (150 feet) open air
  • Phase bridge detect beacon: Yes
  • INSTEON device category: 0x02 appliance control

X10

  • X10 address: 1 optional (comes unassigned)
  • X10 transmitter: Yes
  • X10 receiver: Yes
  • X10 status response: Supported
  • X10 minimum transmit level: 3.2 Vpp into 5 Ohms
  • X10 minimum receive level: 20mV into 5 Ohms
  • X10 messages repeated: No

Mechanical

  • Mounting: AC outlet
  • Wires: N/A
  • Screw clamp connections: N/A
  • Case color: White
  • Set button: 1
  • Plastic: UV stabilized polycarbonate
  • Beeper: Yes
  • LED: 1, RGB
  • Dimensions: 10cm H x 4.3cm W x 3.4cm D -
  • Weight: 130g ±10g
  • Operating environment: Indoors
  • Operating humidity range: 0-90% relative humidity

Electrical

  • Voltage: 100VAC to 240VAC (+/- 10%)
  • Frequency: 50/60Hz auto detected at power-up
  • Maximum load:
    • 16A – 240VAC (EUR)
    • 10A – 240VAC (AUS/NZ)
    • 3600W/240VAC Resistive
    • 700W/240VAC Inductive/Capacitive
    • 2000W/240VAC Bulbs/Low Voltage Halogen
  • Minimum load: N/A
  • Load type(s):
    • Resistive
    • Inductive/capacitive
    • Low voltage halogen
  • Hardwired remote control: N/A
  • Retains all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: < 0.75 watts
  • Safety approved: CE, C-Tick
  • Certifications
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2632-432-PLG-DIMMER


Haibrain INSTEON 2632-432 Plug-in Dimmer Module (INSTEON Plug.in modules)

Lamp-/Dimmer module, Plug-in, ON / OFF / DIM.
  • Remotely control lamps: brighten, dim and turn on and off
  • Easy to install plug-in module
  • Customizable settings: 32 brightness levels and 4 ramp rates
  • Full local control (brighten/dim, on/off, and fast on/fast off)
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance
  • X10 Compatible

Item #: 2632-432-PLG-DIMMER

Availability: in stock



EUR 51,99






Album Insteon Forum Insteon Developer Program

Details

Insteon plug-in Dimmer Module (G Plug).

Model: 08702

The plug-in dimmer module from Insteon offers, besides the ON/OFF option, the ability to dim your lights!

The installation will only take a few seconds! By simple placing the module between a socket and your light, the installation is complete. Connecting lights to your Insteon home automation system has never been this easy!

The plug-in module is powered and controlled through your 230V mains. The module receives INSTEON signals from your mains, making it possible to operate with an Insteon controller! In addition, the module can also be manually operated by the switch that is mounted on the side of the module.

This model is supplied with an G-plug (also available with an F-plug or U-plug).

If you prefer a plug-in module without a DIM option, we recommend the Insteon On/off Module.

Specs

TECHNICAL DATA

INSTEON

  • INSTEON powerline mesh repeater: Yes
  • INSTEON RF mesh repeater: Yes
  • INSTEON controller: Yes
  • INSTEON responder: Yes
  • Maximum links/scenes: 400
  • Load brightness levels: 32 when controlled locally (256 remotely)

LED:

  • Beep on button press: Beeps when button is pressed (must be enabled via software)
  • LED brightnes:s Adjustable, from off to bright
  • Local on-level: Adjustable, 32 fixed brightness levels or resume dim
  • Local ramp-rate: Adjustable from 0.1 seconds to 5 seconds locally (0.1 seconds to 8 minutes via software)
  • Local control: Yes
  • LED signals:
    • Green: when load is on, red when load is off
    • Blinks green: once when all responders acknowledge (can be disabled via software)
    • Blinks red: once if responder does not acknowledge
    • Blinks red or green: during setup
    • Blinks red: to indicate traffic (must be enabled via software)
  • Beep on button press: Beeps when button is pressed (must be enabled via software)
  • LED brightnes:s Adjustable, from off to bright
  • Local on-level: Adjustable, 32 fixed brightness levels or resume dim
  • Local ramp-rate: Adjustable from 0.1 seconds to 5 seconds locally (0.1 seconds to 8 minutes via software)
  • Local control: Yes
  • Commands supported as controller:
    • On / Off
    • Fast-on / Fast-off
    • Begin brighten / Begin dim
    • End brighten / End dim
  • Commands supported as responder:
    • On / Off
    • Fast-on / Fast-off
    • Begin brighten / Begin dim
    • End brighten / End dim
    • Incremental brighten / Incremental dim
    • Beep
  • Software configurable: Yes
  • RF range: Up to 50 meters (150 feet) open air
  • Phase bridge detect beacon: Yes

X10

  • X10 address: 1 optional (comes unassigned)
  • X10 transmitter: Yes
  • X10 receiver: Yes
  • X10 status response: Supported
  • X10 resume dim: Supported (by setting local on-level to zero)
  • X10 minimum transmit level: 3.2 Vpp into 5 Ohms
  • X10 minimum receive level: 20mV into 5 Ohms
  • X10 messages repeated: No

Mechanical

  • Mounting: AC outlet
  • Wires: NA
  • Screw clamp connections: NA
  • Case color: White
  • Set button: 1
  • Plastic: UV stabilized polycarbonate
  • Beeper: Yes
  • LED: 1, RGB
  • Dimensions: 10cm H x 4.3cm W x 3.4cm
  • Weight: 130g ±10g
  • Operating environment: Indoors
  • Operating humidity: range 0-90% relative humidity

Electrical

  • Voltage: 100VAC to 240VAC
  • Frequency: 50/60Hz auto detected at power-up
  • Maximum load: 300W (@ 240VAC) 300W (@ 120VAC)
  • Minimum load: 5 Watts
  • Load type(s): Lighting: Incandescent, dimmable CFL, dimmable halogen, select dimmable LED (compatible with LED bulbs that support leading edge triac dimming.)
  • Hardwired remote control: N/A
  • Retains all settings without power :Yes, saved in non-volatile EEPROM
  • Standby power consumption: < 0.75 watts
  • Safety approved: CE, C-Tick
  • Certifications:
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP