2453-422-PRO-RELAY


Marmitek INSTEON 2453-422 Relay DIN Rail Module (INSTEON Professional)

Relay DIN Rail Module for lights and appliances.
  • Add INSTEON remote control directly to your INSTEON setup
  • Snaps onto a DIN rail
  • Sense wiring retains local control at the switch
  • Compatible with latching, single momentary and dual momentary switches
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2453-422-PRO-RELAY

Availability: In Stock



EUR 74,99






Album Insteon Forum Insteon Developer Program

Details

Insteon Appliance module, DIN rail mounting, on / off (230V, 16A).

Model: 08714

Use the INSTEON DIN Rail Appliance module to create complicated but organized appliance/lighting circuits. Rather than mount multiple switches in a wall, install a single keypad and run all your wiring back to a central location. The INSTEON DIN Rail Appliance module fits a standard EN 50022 DIN rail for ease in mounting.

In case you would prefer an INSTEON DIN Rail Dimmer module with the ability to dim lights, we recommend the Insteon Lamp-/dimmer DIN module.

DIN Rail On/Off Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON powerline mesh repeater: Yes
  • INSTEON RF mesh repeater: Yes
  • INSTEON controller: Yes
  • INSTEON responder: Yes
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • LED brightness: Adjustable, from off to bright
  • LED signals:
    • Green: when load is on, red when load is off.
    • Blinks red: when responder does not acknowledge (can be disabled via software).
    • Blinks red or green: during setup.
  • Local control: Yes
  • Commands supported as controller: On/off, Fast on/off, Begin brighten/dim, End brighten/dim
  • Commands supported as responder: On/off, Fast on/off, Beep
  • Software configurable: Yes, RF range Up to 150 feet (50 meters) open air (Range may vary due to local interference)
  • Phase detect beacon: Yes

X10

  • X10 address: 1 optional (comes unassigned)
  • X10 transmitter: Yes
  • X10 receiver: Yes
  • X10 status response: Supported
  • X10 resume dim: Supported (by setting local on-level to zero)
  • X10 minimum transmit level: 3.2 Vpp into 5 Ohms
  • X10 minimum receive level: 20mV into 5 Ohms
  • X10 messages repeated: No

Mechanical

  • Mounting: 35mm (top hat) DIN Rail
  • Wires: NA
  • Max Cable Size: 4mm2, 12 AWG (2.72mm Diameter)
  • Min Cable Size: 1.5mm2, 15 AWG
  • Screw DIN Rail connections: Line, Neutral, Load, Sense 1, Sense 2
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized polycarbonate
  • Beeper: Yes
  • Beep on button press: Optional (off by default)
  • LED: 1, RGB
  • Dimensions: 80mm x 52mm x 63mm
  • Weight: 175g
  • Operating environment: Indoors

Electrical

  • Voltage: 100VAC to 240VAC
  • RF Frequency: US 915 MHz, EU 869 MHz, AUS/NZ 921 MHz
  • Electrical Frequency: 50/60Hz auto detected at power-up
  • Load type(s): Resistive, Inductive/capacitive, Low voltage halogen
  • Minimum load: None
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retains all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: < 1 watt
  • Safety approval(s): ETL, CE, C-Tick
  • Certifications
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2452-422-PRO-DIMMER


Marmitek INSTEON 2452-422 Dimmer DIN Rail Module (INSTEON Professional)

Dimmer DIN Rail Module for lights.
  • Add INSTEON dimmable remote control directly to your wired lights
  • Snaps onto a DIN rail
  • Sense wiring retains local control at the switch
  • Programmable on-level and fade on/off speed
  • Compatible with latching, single momentary and dual momentary switches
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2452-422-PRO-DIMMER

Availability: In Stock



EUR 74,99






Album Insteon Forum Insteon Developer Program

Details

Insteon Lamp-/dimmer module, DIN rail mounting, on / off / dim.

Model: 08713

Use the INSTEON DIN Rail Dimmer to create complicated but organized lighting circuits. Rather than mount multiple switches in a wall, install a single keypad and run all your wiring back to a central location. The INSTEON DIN Rail Dimmer fits a standard EN 50022 DIN rail for ease in mounting.

In case you would prefer an Insteon Appliance module, DIN rail, with the ability to switch lights On/Off, we recommend the Insteon Appliance module, DIN rail.

DIN Rail On/Off Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON powerline mesh repeater: Yes
  • INSTEON RF mesh repeater: Yes
  • INSTEON controller: Yes
  • INSTEON responder: Yes
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • LED brightness: Adjustable, from off to bright
  • LED signals:
    • Green: when load is on, red when load is off.
    • Blinks red: when responder does not acknowledge (can be disabled via software).
    • Blinks red or green: during setup.
  • Local on-level: Adjustable, 32 fixed brightness levels or resume dim
  • Local ramp-rate: Adjustable from 0.1 seconds to 5 seconds locally (0.1 seconds to 8 minutes via software)
  • Local control: Yes
  • Commands supported as controller: On/off, Fast on/off, Begin brighten/dim, End brighten/dim
  • Commands supported as responder: On/off, Fast on/off, Beep
  • Software configurable: Yes, RF range Up to 150 feet (50 meters) open air (Range may vary due to local interference)
  • Phase bridge detect beacon: Yes
  • INSTEON device category: 0x01 dimmable lighting control (all frequencies)

X10

  • X10 address: 1 optional (comes unassigned)
  • X10 transmitter: Yes
  • X10 receiver: Yes
  • X10 status response: Supported
  • X10 resume dim: Supported (by setting local on-level to zero)
  • X10 minimum transmit leve:l 3.2 Vpp into 5 Ohms
  • X10 minimum receive level: 20mV into 5 Ohms
  • X10 messages repeated: No

Mechanical

  • Mounting: 35mm (top hat) DIN Rail
  • Wires: NA
  • Max Cable Size: 4mm2, 12 AWG (2.72mm Diameter)
  • Min Cable Size: 1.5mm2, 15 AWG
  • Screw DIN Rail connections: Line, Neutral, Load, Sense 1, Sense 2
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized polycarbonate
  • Beeper: Yes
  • Beep on button press: Optional (off by default)
  • LED: 1, RGB
  • Dimensions: 80mm x 52mm x 63mm
  • Weight: 175g
  • Operating environment: Indoors
  • Operating humidity range: 0-90% relative humidity

Electrical

  • Voltage: 100VAC to 240VAC
  • RF Frequency: US 915 MHz, EU 869 MHz , AUS/NZ 921 MHz
  • Electrical Frequency: 50/60Hz auto detected at power-up
  • Load type(s): Resistive, Low voltage halogen, Incandescent
  • Maximum load: 300 watts
  • Minimum load: 5 watts
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retains all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: < 1 watt
  • Safety approval(s): ETL, CE, C-Tick
  • Certifications
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP