FGK-101-107-ZW5


Z-Wave Fibaro Door/Window Sensor FGK-101 ZW5 - FGK-107 ZW5 (Z-Wave Sensors)

Extremely versatile 3-in-1 sensor combining movement, temperature and binary sensor functions.
  • Compatible with any Z-Wave Controller
  • Compatible with any Z-Wave or Z-Wave+ Controller (firmware 3.2 or higher)
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher).
  • Works with other Z-Wave network devices, but as a battery device doesn’t take part in signal routing
  • Door/window opening detected through Sensor’s body and a magnet separation
  • Easily mounted on doors, windows, garage gates and roller blinds
  • Device status signaled by the LED diode
  • Compatible with DS18B20 temperature sensor
  • Possibility of connecting the switch to potential-free input
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGK-101-107-ZW5

Availability: Usually ships in 2-3 days



EUR 49,95

Fibaro Door/Window Sensor




Album 

Details

Extremely versatile 3-in-1 sensor combining movement, temperature and binary sensor functions.

Model: FGK-101-107 Door/Window Sensor

FIBARO Door/Window Sensor is a wireless, battery powered reed sensor compatible with the Z-Wave standard. Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices. Sensor can be used to trigger scenes and everywhere there is a need for information about opening or closing of doors, windows, garage doors, etc. Opening is detected by separating the sensor’s body and the magnet. In addition the FIBARO Door/Window Sensor supports one DS18B20 temperature sensor and has one potential free input.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGFS-101-ZW5


Z-Wave Fibaro Flood Sensor FGFS-101 ZW5 (Z-Wave Sensors)

The ultimate Flood, Temperature and Tilt sensor.
  • Compatible with any Z-Wave Controller
  • Compatible with any Z-Wave or Z-Wave+ Controller (firmware 3.2 or higher)
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher).
  • May be connected to any alarm system (potential free output terminal)
  • Extremely easy installation – simply put on a surface prone to flooding
  • May be installed anywhere – flood sensor’s contacts extended with a wire
  • Battery or VDC powered. When connected to an external, 12/24V DC power source, the battery serves as an emergency power source
  • Theft protection – tilt is reported to the Z-Wave network or alarm system’s main controller
  • Two operating modes – flood/temperature sensor or just a temperature sensor.
  • Alarm is signalled by sound, visual indicator (LED diode) and Z-Wave
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
FIBARO Flood Sensor with firmware 3.2 or higher is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Item #: FGFS-101-ZW5

Availability: Usually ships in 2-3 days



EUR 59,95






Album 

Details

The ultimate Flood, Temperature and Tilt sensor.

Model: FGFS-101 Flood Sensor

FIBARO Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.

The device has built in temperature sensor, monitoring temperature of e.g. floor. Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in visual LED indicator and acoustic alarm. LED diode signals flood, operating mode or the Z-Wave network communication range.

In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.

FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGMS-001-ZW5


Z-Wave Fibaro Motion Sensor FGMS-001 ZW5 (Z-Wave Sensors)

Fibaro Motion Sensor with: Motion sensor, Temperature sensor, Light sensor, Accelerometer.
  • Compatible with any Z-Wave Controller.
  • Compatible with any Z-Wave or Z-Wave+ Controller (firmware 3.2 or higher).
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher).
  • Battery powered.
  • Detects motion using a passive IR sensor.
  • Measures the temperature.
  • Measures the light intensity.
  • Easy installation on a wall or any surface.
  • Theft and tampering protection – once vibrations are detected, the notification is sent to the main controller.
  • Detected movement, temperature and vibrations are signalled by the built-in LED diode.
  • Detects vibrations.
  • Built-in accelerometer allows to measure orientation in space.
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
FIBARO Flood Sensor with firmware 3.2 or higher is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Item #: FGMS-001-ZW5

Availability: Usually ships in 2-3 days



EUR 57,95






Album 

Details

Fibaro Motion Sensor with 4 functions:

Motion Detector
Temperature sensor
Light sensor
Accelerometer
New Z-Wave Plus Version (GEN5)

Model: FGMS-001 Motion Sensor

FIBARO Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The FIBARO Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The Motion Sensor can be used for lighting scenes and presence monitoring systems.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

The NEW and IMPROVED Fibaro Motion Sensor is now rated Z-Wave Plus. Z-Wave Plus features:

  • 50% improvement in battery life
  • 67% improvement in range
  • 250% more bandwidth
  • Three RF channels for improved noise immunity and higher bandwidth
  • New Plug-n-Play Network-wide Inclusion feature
  • Improved self-healing and fault tolerance with Explorer Frame feature
  • Standardized method for Over the Air firmware updates (OTA)
  • Improved product information capture for product certification database

FAQ

Contacts

 
FGSD-002-ZW5


Z-Wave Fibaro Smoke Sensor FGSD-002 ZW5 (Z-Wave Sensors)

The ultimate Z-Wave Plus Smoke Sensor: beautiful and functional.
  • Compatible with any Z-Wave or Z-Wave+ Controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Extremely easy installation – simply install it in location prone to fire
  • Battery powered
  • 3 levels of sensors sensitivity
  • Built-in casing opening detector
  • Alarm is signaled by sound, visual indicator and Z-Wave control command
  • Programmable excess temperature warning
  • Automatic test performed every 10 seconds
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGSD-002-ZW5

Availability: Usually ships in 2-3 days



EUR 64,95






Album 

Details

The ultimate Z-Wave Plus Smoke Sensor: beautiful and functional.
New version according to EN14604 Standard!

Model: FGSD-002 Smoke Sensor

FIBARO Smoke Sensor is a universal, optical Z-Wave smoke detector. Fire alarm is signaled by sound, visual indicator blinking and by sending Z-Wave alarm and control commands.
The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which is programmable indicator of exceeding set temperature level.
FIBARO Smoke Sensor is designed to be placed on a wall or ceiling. Visual indicator signals fire, operating mode and is used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
FGBS-321


Z-Wave Fibaro FGBS-321 Universal Binary Sensor (Z-Wave Micromodules)

Enables binary sensors to work with a Z-Wave network.
  • Compatible with any Z-Wave Controller
  • Advanced microprocessor control
  • Compatible with regular and parametric alarm lines (can be connected to 2 alarm detectors)
  • Compatible with binary sensors (can be connected to 2 binary outputs)
  • Compatible with DS18B20 temperature sensors (can be connected to four DS18B20 temperature sensors)
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Item #: FGBS-321

Availability: Usually ships in 2-3 days



EUR 39,95






Album 

Details

Enables binary sensors to work with a Z-Wave network. Supports 2 binary sensors or 4 temperature sensors. Works with any Z-Wave network. Easy DIY Installation

Model: FGBS-321 Z-Wave Fibaro Universal Binary Sensor

FIBARO Universal Binary Sensor is a wireless module allowing to improve the functionality of any wired sensor with a binary output by adding Z-Wave network communication.

Moreover, the module allows for wireless communication between the system and the DS18B20 temperature sensors. It can service up to two binary sensors and up to four temperature sensors.

The device is designed to be installed in the housing of a sensor or another device, whenever wireless collection of data from the wired sensors is required.

Warning

WARNING: This Z-WAVE product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Z-WAVE products.

FAQ

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP