08175-IRX-IRCONTROL11XTRA


Marmitek 08175 IR Control 11 XTRA Set (Wired IR extensions)

Panel Mount High-end Blaster Infrared Extender.
  • Operate your A/V equipment which is out of sight
  • Operate any of your A/V equipment which is located behind closed cupboard doors (or even from another room) with your current remote control.
  • The small built-in IR receiver can be fully integrated in your A/V cabinet so the entire set can be placed out of sight.
  • With IR blaster function for operating numerous devices with one IR blaster or if you prefer not to stick IR LEDs onto your A/V equipment.
  • Works with almost all brands and models and is also suitable for new IR code formats (such as RC-MM) which are used in many new HD devices and digital TV decoders.
  • Incorporates new IR filter techniques for use in the vicinity of Flat Screen TVs (Plasma, LCD and LED), indirect sunlight and energy-efficient light bulbs.
  • Compatible with Sky and other devices that comply with IR standards (if you're not sure about compatibility of your appliances and Marmitek products, please contact us).

Item #: 08175-IRX-IRCONTROL11XTRA

Availability: in stock



EUR 149,95






Album 

Details

Product launch IR Control 11 XTRA

You probably already know about our high quality infrared extension solutions, specifically the IR Control 8 and IR Control 10 XTRA.

Increasingly, separate panel mount receivers were ordered along with the IR Control 8, because consumers even wanted to position the mini receiver completely out of sight. Often, the surface mount mini receiver would then be stored as a backup, which is a shame.

Consequently, today Marmitek introduces, in its "Operate Anywhere" category, the IR Control 11 XTRA. This discount bundle contains the panel mount receiver instead of the surface mount mini receiver. In addition, the IR Control 11 XTRA also features the latest IR Blaster technology which, in our product portfolio, can be identified by the suffix "XTRA".

Panel mount IR receiver for IR Control 11 XTRA with bezels
Invisible panel mount receiver

The panel mount receiver allows you to integrate the infrared solution invisibly into an AV cabinet or wall.

IR Blaster technology
Picture Blasters IR Control 11 XTRA

By using IR Blaster technology, you no longer have to search for the IR sensors of the AV devices you want to connect. Unique to this solution is that you may position the IR Blasters anywhere inside your AV cabinet to be able to operate all devices inside the same compartment. This ensures you of excellent operation.

From now on, you can chose between three custom solutions:

IR Control 8
CLASSIC - IR Control 8

With 4 IR LEDs, which you attach to the IR sensors of your equipment and a surface mount receiver, which will remain visible in a subtle way. The panel mount receiver will remain available separately.

IR Control 10 XTRA
PLUG AND PLAY - IR Control 10 XTRA

With 2 IR Blasters, which you may put anywhere inside your AV cabinet, and a surface mount receiver, which will remain visible in a subtle way. New! A panel mount receiver is available separately.

PROFESSIONAL ADVANCED - IR Control 11 XTRA
IR Control 11 XTRA

To fully integrate a panel mount receiver into your cabinet, and thus opting for a 100% invisible solution, we now offer a one stop shopping solution with the IR Control 11 XTRA. This high-end infrared extender features 1 small invisible panel mount receiver (including black and white cover rings), 2 IR Blasters and 1 IR LED cable with 2 IR LEDs.

The IR Control 11 XTRA is available immediately and its general launch will take place shortly thereafter. Make sure you have this product available!

Specs

TECHNICAL DATA
IR receiver
  • Frequency range: 30-60 KHz
  • IR reception range: ± 10 meters
  • IR reception angle: 90º (+45º/-45º from centre)
  • Cable length: 3 meters, extendable up to 300 meters
  • IR reception indication: YES, purple indication LED
  • Status indication: YES, green indication LED
  • Receiver dimensions:
    • Surface mount: 40 x 13 x 11mm
    • Panel mount: 14 x 52mm, Ø 12mm (drill size)
IR module
  • Power supply POWER: 100-240VAC 50/60Hz, 12VDC 200mA (supplied)
  • Power supply STATUS: 5-24VDC / 5-12VAC plug, - 5.5mm outside / + 2.1mm inside (not supplied)
  • IR input:
    • 1x 3.5mm jack connector, for standard IR receiver
    • 1x screw connector, for up to 6 in parallel connected IR receivers. Extendable up to 300 meters using CAT5 (or equivalent)
  • IR output: 4x 3.5mm jack plug (mono), switchable for IR extension cables with emitter or blaster LEDs
  • Dimensions: 95 x 46 x 20mm
IR extension cable with 1 blaster LED
  • Connection: 3.5mm jack plug (mono)
  • IR LEDs: 1x IR blaster LED
  • Cable length: 3 meters
IR extension cable with 2 emitter LEDs
  • Connection: 3.5mm jack plug (mono)
  • IR LEDs: 2x IR emitter LEDs
  • Cable length: 3 meters

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice

Accessories

IRC Receiver 3060S
IRC Receiver 3060S

Extra IR Receiver (surface mount)

  • You can use an extra IR Receiver to operate your A/V equipment from another room.
IRC Receiver 3060P
IRC Receiver 3060P

Extra IR Receiver (panel mount)

  • The small built-in IR receiver can be fully integrated in your A/V cabinet so the entire set can be placed out of sight.
IRC non-blinking 2 LED
IRC non-blinking 2 LED

Extra IR extension cable with 2 emitter LEDs

  • With the help of an extra IR extension cable you can operate 2 extra A/V devices.
IRC Blaster 1 LED
IRC Blaster 1 LED

Extra IR extension cable with 1 blaster LED

  • Optional IR Blaster LED allows you to operate A/V devices inside an additional compartment/cabinet section.

Contacts

 
08140-IRX-IRCONTROL10XTRA


Marmitek 08140 IR Control 10 XTRA Set (Wired IR extensions)

Invisible High-end Blaster Infrared Extender.
  • Operate any of your A/V equipment which is located behind closed cupboard doors (or even from another room) with your current remote control.
  • With the IR Control 10 XTRA you can operate 2 compartments/cupboard sections and 2 extra pieces of equipment.
  • With the exception of the very small IR receiver, the complete set can be located completely out of sight.
  • With IR blaster function for operating numerous devices with one IR blaster or if you prefer not to stick IR LEDs onto your A/V equipment.
  • Works with almost all brands and models and is also suitable for new IR code formats (such as RC-MM) which are used in many new HD devices and digital TV decoders.
  • Incorporates new IR filter techniques for use in the vicinity of Flat Screen TVs (Plasma, LCD and LED), indirect sunlight and energy-efficient light bulbs.
  • Compatible with Sky and other devices that comply with IR standards (if you're not sure about compatibility of your appliances and Marmitek products, please contact us).

Item #: 08140-IRX-IRCONTROL10XTRA

Availability: 2-3 business days



EUR 109,95






Album 

Details

Surprise

Planning to buy a new A/V device to connect to your TV? And your partner is already moaning about the cable mess? Perhaps this new product from Marmitek offers the solution which will convince your partner otherwise!

Marmitek's latest solution allows you to position your A/V equipment inside your attractive cabinet/TV stand. Even with the front fully closed, you are still able to operate it.

How does it work?

Locate your A/V equipment in a closed cupboard, TV cabinet or even in another room. The IR receiver must be installed in view of your own remote control. Stick the IR blaster LED wherever you want in the cabinet and conceals the IR main module neatly. Point the remote control at the IR receiver in order to send the appropriate command to the IR LEDs (via the IR main module). These will then immediately pass this onto the A/V equipment.

IR Control 10 XTRAIRC10
What is so unique about this solution?

Marmitek offers several solutions to operate A/V equipment which is hidden from sight. So why would you choose this particular solution? The IR Control 10 XTRA is an infra-red extender which is easy to install. Because the set is equipped with 2 IR blasters instead of IR LEDs, positioning them does not require the utmost accuracy. You can position the IR Blasters anywhere in your cabinet (1 for each compartment/cabinet section) and the IR light will naturally find its way to your A/V equipment. Furthermore, this is one of the most invisible solutions ever, since the IR receiver is about the size of a pen cap.

From now on, you can chose between three custom solutions:

IR Control 8
CLASSIC - IR Control 8

With 4 IR LEDs, which you attach to the IR sensors of your equipment and a surface mount receiver, which will remain visible in a subtle way. The panel mount receiver will remain available separately.

IR Control 10 XTRA
PLUG AND PLAY - IR Control 10 XTRA

With 2 IR Blasters, which you may put anywhere inside your AV cabinet, and a surface mount receiver, which will remain visible in a subtle way. New! A panel mount receiver is available separately.

PROFESSIONAL ADVANCED - IR Control 11 XTRA
IR Control 11 XTRA

To fully integrate a panel mount receiver into your cabinet, and thus opting for a 100% invisible solution, we now offer a one stop shopping solution with the IR Control 11 XTRA. This high-end infrared extender features 1 small invisible panel mount receiver (including black and white cover rings), 2 IR Blasters and 1 IR LED cable with 2 IR LEDs.

The IR Control 11 XTRA is available immediately and its general launch will take place shortly thereafter. Make sure you have this product available!

Specs

TECHNICAL DATA
IR receiver
  • Frequency range: 30-60 KHz
  • IR reception range: ± 10 meters
  • IR reception angle: 90º (+45º/-45º from centre)
  • Cable length: 3 meters, extendable up to 300 meters
  • IR reception indication: YES, purple indication LED
  • Status indication: YES, green indication LED
  • Receiver dimensions: 40 x 13 x 11 mm
IR module
  • Power supply POWER: 100-240VAC 50/60Hz, 12VDC 200mA (supplied)
  • Power supply STATUS: 5-24VDC / 5-12VAC plug, - 5.5mm outside / + 2.1mm inside (not supplied)
  • IR input: 1x 3.5mm jack connector, for standard IR receiver; 1x screw connector, for up to 6 in parallel connected IR receivers. Extendable up to 300 meters using CAT5 (or equivalent)
  • IR output: 4x 3.5mm jack plug (mono), switchable for IR extension cables with emitter or blaster LEDs
  • Dimensions: 95 x 46 x 20 mm
IR extension cable with 1 blaster LED
  • Connection: 3.5mm jack plug (mono)
  • IR LEDs: 1x IR blaster LED
  • Cable length: 3 meters
IR extension cable with 2 emitter LEDs
  • Connection: 3.5mm jack plug (mono)
  • IR LEDs: 2x IR emitter LEDs
  • Cable length: 3 meters

Accessories

IRC Receiver 3060S
IRC Receiver 3060S

Extra IR Receiver (surface mount)

  • You can use an extra IR Receiver to operate your A/V equipment from another room.
IRC Receiver 3060P
IRC Receiver 3060P

Extra IR Receiver (panel mount)

  • The small built-in IR receiver can be fully integrated in your A/V cabinet so the entire set can be placed out of sight.
IRC non-blinking 2 LED
IRC non-blinking 2 LED

Extra IR extension cable with 2 emitter LEDs

  • With the help of an extra IR extension cable you can operate 2 extra A/V devices.
IRC Blaster 1 LED
IRC Blaster 1 LED

Extra IR extension cable with 1 blaster LED

  • Optional IR Blaster LED allows you to operate A/V devices inside an additional compartment/cabinet section.

Contacts

 
08311-IRX-IRCONTROL10


Marmitek 08311 IR Control 10 Set (Wired IR extensions)

Invisible Advanced Infrared Extender. Extra small receiver.
  • Operate any of your A/V equipment which is located behind closed cupboard doors (or even from another room) with your current remote control.
  • With the IR Control 10 you can operate 4 pieces of equipment.
  • With the exception of the very small IR receiver, the complete set can be located completely out of sight.
  • Works with almost all brands and models and is also suitable for new IR code formats (such as RC-MM) which are used in many new HD devices and digital TV decoders.
  • Incorporates new IR filter techniques for use in the vicinity of Flat Screen TVs (Plasma, LCD and LED), indirect sunlight and energy-efficient light bulbs.
  • Compatible with all digital TV providers in Europe, like BT Vision, Freesat, Freeview, Sky TV, Sky+, Sky HD and Virgin.

Item #: 08311-IRX-IRCONTROL10

Availability: 2-3 business days



EUR 99,95

Marmitek 08311 IR Control 10 Set




Album 

Details

IR Control 10
How does the IR Control 10 work?

Advanced infrared remote control extender - extra small receiver.

Locate your A/V equipment in a closed cupboard, TV cabinet or even in another room.
The IR receiver must be installed in view of your own remote control. This new, updated IR receiver can even be placed in the vicinity of your Flat Screen (Plasma, LCD or LED screen).
Point the remote control at the IR receiver in order to send the appropriate command to the IR LEDs (via the IR main module). These will then immediately pass this onto the A/V equipment.

Specs

Technical specifications
IR Control 10

Accessories

IRCP non-blinking 2 LED
IRCP non-blinking 2 LED

Extra IR extension cable 2 emitter LEDs for IR Control 8

  • With the help of an extra IR extension cable you can operate 2 extra A/V devices.
IR Receiver 3856S
IR Receiver 3856S

Extra dual-band IR receiver (surface mount) for IR Control 8

  • You can use an extra IR Receiver to operate your A/V equipment from another room.
  • New, disruption-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), direct sunlight and energy-saving bulbs.
IR Receiver 3856P
IR Receiver 3856P

Extra dual-band IR receiver (panel mount) for IR Control 8

  • You can use an extra IR Receiver to operate your A/V equipment from another room.
  • New, disruption-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), direct sunlight and energy-saving bulbs.

Contacts

 
08142-IRX-IRC3060S


Marmitek 08142 IRC Receiver 3060S (Wired IR extensions)

Extra IR Receiver (surface mount).
  • Each system needs a minimum of one IR Receiver (maximum of 6).
  • You can use an extra IR Receiver to operate your A/V equipment from another room.
  • Works with almost all brands and models and is also suitable for new IR code formats (such as RC-MM) which are used in many new HD devices and digital TV decoders.
  • New, disruption-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), direct sunlight and energy-saving bulbs.
  • Compatible with Sky and other devices that comply with IR standards (if you're not sure about compatibility of your appliances and Marmitek products, please contact us).

Item #: 08142-IRX-IRC3060S

Availability: 2-3 business days



EUR 49,95






 

Details

This IR Receiver is part of the IR Control 10/11 XTRA Modules. The IR Receiver receives infrared commands from your remote control and sends these onto the IR Modules. Install this product according to the user manual of the IR Control 10/11 XTRA Modules.

Specs

TECHNICAL DATA
  • Frequency range: 30-60 KHz
  • IR reception range: ± 10 meters
  • IR reception angle: 90º (+45º/-45º from centre)
  • Cable length: 3 meters, extendable up to 300 meters
  • IR reception indication: YES, purple indication LED
  • Status indication: YES, green indication LED
  • Receiver dimensions: 40 x 13 x 11mm

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice

Contacts

 
08143-IRX-IRC3060P


Marmitek 08143 IRC Receiver 3060P (Wired IR extensions)

Extra IR Receiver (panel mount).
  • Each system needs a minimum of one IR Receiver (maximum of 6).
  • The small built-in IR receiver can be fully integrated in your A/V cabinet so the entire set can be placed out of sight.
  • You can use an extra IR Receiver to operate your A/V equipment from another room.
  • Works with almost all brands and models and is also suitable for new IR code formats (such as RC-MM) which are used in many new HD devices and digital TV decoders.
  • New, disruption-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), direct sunlight and energy-saving bulbs.
  • Compatible with Sky and other devices that comply with IR standards (if you're not sure about compatibility of your appliances and Marmitek products, please contact us).

Item #: 08143-IRX-IRC3060P

Availability: 2-3 business days



EUR 79,95






 

Details

This IR Receiver is part of the IR Control 10/11 XTRA Modules. The IR Receiver receives infrared commands from your remote control and sends these onto the IR Modules. Install this product according to the user manual of the IR Control 10/11 XTRA Modules.

Specs

TECHNICAL DATA
  • Frequency range: 30-60 KHz
  • IR reception range: ± 10 meters
  • IR reception angle: 90º (+45º/-45º from centre)
  • Cable length: 3 meters, extendable up to 300 meters
  • IR reception indication: YES, purple indication LED
  • Status indication: YES, green indication LED
  • Receiver dimensions: 14 x 52mm, Ø 12mm (drill size)

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice

Contacts

 
08144-IRX-IRCBLASTER


Marmitek 08144 IRC Blaster 1 LED (Wired IR extensions)

Extra IR extension cable with 1 blaster LED.
  • Optional IR Blaster LED allows you to operate A/V devices inside an additional compartment/cabinet section.
  • Compatible with Sky and other devices that comply with IR standards (if you're not sure about compatibility of your appliances and Marmitek products, please contact us).

Item #: 08144-IRX-IRCBLASTER

Availability: 2-3 business days



EUR 14,95






 

Details

This IR Blaster Emitter is part of the IR Control 10/11 XTRA Modules. The IR Blaster Emitter sends infrared commands to the IR sensors of the AV appliances. Install this product according to the user manual of the IR Control 10/11 XTRA Modules.

Specs

TECHNICAL DATA
  • Connection: 3.5mm jack plug (mono)
  • IR LEDs: 1x IR Blaster LED
  • Cable length: 3 meters

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice

Contacts

 
08145-IRX-IRC2LED


Marmitek 08145 IRC Non Blinking 2 LED (Wired IR extensions)

Extra IR extension cable with 2 emitter LEDs.
  • With the help of an extra IR extension cable you can operate 2 extra A/V devices.
  • Compatible with Sky and other devices that comply with IR standards (if you're not sure about compatibility of your appliances and Marmitek products, please contact us).

Item #: 08145-IRX-IRC2LED

Availability: in stock



EUR 9,95






 

Details

This IR Emitter is part of the IR Control 8 and/or IR Control 10/11 XTRA Modules. The IR Emitter sends infrared commands to the IR sensors of the AV appliances. Install this product according to the user manual of the IR Control 8 and/or IR Control 10/11 XTRA Modules.

Specs

TECHNICAL DATA
  • Connection: 3.5mm jack plug (mono)
  • IR LEDs: 2x IR emitter LEDs
  • Cable length: 3 meters

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice

Contacts

 
09891-IRX-IRCONTROL8


Marmitek 09891 IR Control 8 Set (Wired IR extensions)

Advanced Infrared Extender Set.
  • Operate all your A/V equipment that is out of sight.
  • Operate 4 (max. 8) A/V devices behind closed cupboard doors (or even from another room) with your current remote control.
  • New interference-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), indirect sunlight and energy-saving light bulbs.
  • Works with almost every brand and model and is suitable for the new IR code formats (such as RC-MM) which are being used in a great deal of new HD equipment.
  • With the IR Control8 you can immediately operate 4 pieces of equipment. With Marmitek 'IRCP blinking 2 LED', an infrared extension cable, you can connect another 2 x 2 pieces of equipment.
  • With the exception of the small IR receiver, the complete set can be located out of sight.
  • Compatible with Sky and other devices that comply with IR standards (if you're not sure about compatibility of your appliances and Marmitek products, please contact us).

Item #: 09891-IRX-IRCONTROL8

Availability: out of stock



EUR 99,95






Flickr

Details

How does the IR Control 8 works?

Locate your A/V equipment in a closed cupboard, TV cabinet or even in another room. The IR receiver must be installed in view of your own remote control. This new, updated IR receiver can even be placed in the vicinity of your Flat Screen (Plasma, LCD or LED screen). Stick the IR LEDs onto the front panel of your A/V equipment and place the IR main module out of sight. Point the remote control at the IR receiver in order to send the appropriate command to the IR LEDs (via the IR main module). These will then immediately pass this onto the A/V equipment.

From now on, you can chose between three custom solutions:

IR Control 8
CLASSIC - IR Control 8

With 4 IR LEDs, which you attach to the IR sensors of your equipment and a surface mount receiver, which will remain visible in a subtle way. The panel mount receiver will remain available separately.

IR Control 10 XTRA
PLUG AND PLAY - IR Control 10 XTRA

With 2 IR Blasters, which you may put anywhere inside your AV cabinet, and a surface mount receiver, which will remain visible in a subtle way. New! A panel mount receiver is available separately.

PROFESSIONAL ADVANCED - IR Control 11 XTRA
IR Control 11 XTRA

To fully integrate a panel mount receiver into your cabinet, and thus opting for a 100% invisible solution, we now offer a one stop shopping solution with the IR Control 11 XTRA. This high-end infrared extender features 1 small invisible panel mount receiver (including black and white cover rings), 2 IR Blasters and 1 IR LED cable with 2 IR LEDs.

The IR Control 11 XTRA is available immediately and its general launch will take place shortly thereafter. Make sure you have this product available!

Specs

IR Module

  • Feed POWER: 230VAC/50Hz, 12VC 500mA (supplied).
  • Feed STATUS: 12VDC 200mA. Plug, - 5.5 mm outside / + 2.1 mm inside (not supplied).
  • IR LEDs connections: 4 x 3.5 mm jack plug (mono).
  • IR Receiver connection: 1 Connector for maximal 3 parallel connected receivers.
  • Dimensions: 85x49x24xmm (fastening points inclusive).

IR receiver built-on

  • Frequency range: 30-60 kHz.
  • IR reception range: ± 10 metres.
  • Length of cable: 2 metres, extendable to max 300 metres (UTP or equivalent).
  • IR receiver: Reception indication LED + Status indication (Blinking LED).
  • IR reception angle: 90° (+45°/-45° from centre).
  • Dimensions receiver block: 32x13x12 mm.

IR Extension cable

  • Connection: 3.5mm jack plug
  • IR LEDs: 2x with transmit indication (Blinking LED).
  • Length of cable: 3 metres (from plug to division 2m, from division to LED 1m).

Accessories

IR Receiver 3856S
IRCP Receiver 3856S

Extra Dual-band IR Receiver (surface mount)

  • You can use an extra IR Receiver to operate your A/V equipment from another room.
  • New, disruption-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), direct sunlight and energy-saving bulbs.
IR Receiver 3856P
IRCP Receiver 3856P

Extra Dual-band IR Receiver (panel mount)

  • You can use an extra IR Receiver to operate your A/V equipment from another room.
  • New, disruption-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), direct sunlight and energy-saving bulbs.
IRCP non-blinking 2 LED
IRCP non-blinking 2 LED

Extra IR extension cable with 2 emitter LEDs

  • With the help of an extra IR extension cable you can operate 2 extra A/V devices.

Contacts

 
08003-IRX-IRCP3856S


Marmitek 08003 IRCP Receiver 3856S (Wired IR extensions)

Extra Dual-band IR Receiver (surface mount).
  • Each system needs a minimum of one IR Receiver (maximum of 3).
  • You can use an extra IR Receiver to operate your A/V equipment from another room.
  • New, disruption-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), direct sunlight and energy-saving bulbs.
  • Compatible with Sky and other devices that comply with IR standards (if you're not sure about compatibility of your appliances and Marmitek products, please contact us).

Item #: 08003-IRX-IRCP3856S

Availability: out of stock



EUR 59,95






 

Details

This IR Receiver is part of the IR Control 8 System. The IR Receiver receives infrared commands from your remote control and sends these onto the IR Module. Install this product according to the user manual of the IR Control 8 System.

Specs

TECHNICAL DATA
  • Frequency range: 30-60 KHz
  • IR reception range: ± 10 meters
  • IR reception angle: 90º (+45º/-45º from centre)
  • Cable length: 4 meters, extendable up to 300 meters
  • IR reception indication: YES, LED
  • Receiver dimensions: 32 x 13 x 12mm

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice

Contacts

 
08004-IRX-IRCP3856P


Marmitek 08004 IRCP Receiver 3856P (Wired IR extensions)

Extra Dual-band IR Receiver (panel mount).
  • Each system needs a minimum of one IR Receiver (maximum of 3).
  • You can use an extra IR Receiver to operate your A/V equipment from another room.
  • New, disruption-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), direct sunlight and energy-saving bulbs.
  • Compatible with Sky and other devices that comply with IR standards (if you're not sure about compatibility of your appliances and Marmitek products, please contact us).

Item #: 08004-IRX-IRCP3856P

Availability: out of stock



EUR 79,95






 

Details

This IR Receiver is part of the IR Control 8 System. The IR Receiver receives infrared commands from your remote control and sends these onto the IR Module. Install this product according to the user manual of the IR Control 8 System.

Specs

TECHNICAL DATA
  • Frequency range: 30-60 KHz
  • IR reception range: ± 10 meters
  • IR reception angle: 90º (+45º/-45º from centre)
  • Cable length: 2 meters, extendable up to 300 meters
  • IR reception indication: YES, LED
  • Receiver dimensions: 15.9 x 50mm, Ø 16mm (drill size)

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP