B2B > Special offer'); ?>" name="description"> NicoShop® :: Special offers, black friday, discounts, sales, promotions, sellings, deals
2633-432-PLG-RELAY


Haibrain INSTEON 2633-432 Plug-in On/Off Module (INSTEON Plug.in modules)

INSTEON On/Off Module - Germany Schuko plug (Europe 869 MHz).
  • Integrated on/off relay
  • Compatible with all INSTEON (and X10) controllers; can also act as an INSTEON (and X10) controller
  • Super-easy setup with multi-color LED and beeper
  • Dual-band communicates simultaneously over both RF and powerline
  • Stores setup state in non-volatile memory so settings arent lost during power outages

Item #: 2633-432-PLG-RELAY

Availability: last 1 available

EUR 51,99
- 25%
EUR 38,99






Album Insteon Forum Insteon Developer Program

Details

Insteon Appliance module, plug-in, on / off (G Plug).

Model: 08703

Connecting devices to your INSTEON home automation system has never been so easy! The plug-in module from Insteon is home automation at its simplest and most convenient.

To enable the plug-in module to receive INSTEON commands, the module should be connected to your 230V mains. Installation will only take a few seconds, simply place the plug-in module between your socket and your device.

After installation your are able to operate (ON/OFF) your device/light remotely with an INSTEON controller and manually with the switch mounted on the side of the module.

This model is supplied with an G-plug (also available with an F-plug or U-plug).

If you prefer a plug-in module with a DIM option, we recommend the Insteon Dimmer Module.

Specs

TECHNICAL DATA

INSTEON

  • INSTEON powerline mesh repeater: Yes
  • INSTEON RF mesh repeater: Yes
  • INSTEON controller: Yes
  • INSTEON responder: Yes
  • Maximum links/scenes: 400

LED

  • Beep on button press: Beeps when button is pressed (must be enabled via software)
  • LED brightness: Adjustable, from off to bright
  • Local control: Yes
  • Led signals:
    • Green: when load is on, red when load is off
    • Blinks green once: when all responders acknowledge (can be disabled via software)
    • Blinks red once: if responder does not acknowledge
    • Blinks red or green: during setup
    • Blinks red: to indicate traffic (must be enabled via software)
  • Beep on button press: Beeps when button is pressed (must be enabled via software)
  • LED brightness: Adjustable, from off to bright
  • Local control: Yes
  • Commands supported as controller:
    • On / Off
    • Fast-on / Fast-off
    • Begin brighten / Begin dim
    • End brighten / End dim
  • Commands supported as responder
    • On / Off
    • Fast-on / Fast-off
    • Beep
  • Software configurable: Yes
  • RF range: Up to 50 meters (150 feet) open air
  • Phase bridge detect beacon: Yes
  • INSTEON device category: 0x02 appliance control

X10

  • X10 address: 1 optional (comes unassigned)
  • X10 transmitter: Yes
  • X10 receiver: Yes
  • X10 status response: Supported
  • X10 minimum transmit level: 3.2 Vpp into 5 Ohms
  • X10 minimum receive level: 20mV into 5 Ohms
  • X10 messages repeated: No

Mechanical

  • Mounting: AC outlet
  • Wires: N/A
  • Screw clamp connections: N/A
  • Case color: White
  • Set button: 1
  • Plastic: UV stabilized polycarbonate
  • Beeper: Yes
  • LED: 1, RGB
  • Dimensions: 10cm H x 4.3cm W x 3.4cm D -
  • Weight: 130g 10g
  • Operating environment: Indoors
  • Operating humidity range: 0-90% relative humidity

Electrical

  • Voltage: 100VAC to 240VAC (+/- 10%)
  • Frequency: 50/60Hz auto detected at power-up
  • Maximum load:
    • 16A 240VAC (EUR)
    • 10A 240VAC (AUS/NZ)
    • 3600W/240VAC Resistive
    • 700W/240VAC Inductive/Capacitive
    • 2000W/240VAC Bulbs/Low Voltage Halogen
  • Minimum load: N/A
  • Load type(s):
    • Resistive
    • Inductive/capacitive
    • Low voltage halogen
  • Hardwired remote control: N/A
  • Retains all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: < 0.75 watts
  • Safety approved: CE, C-Tick
  • Certifications
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure INSTEON Plug-in Appliance On/Off Module Quick Start Guide
Manual INSTEON Plug-in Appliance On/Off Module Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2632-432-PLG-DIMMER


Haibrain INSTEON 2632-432 Plug-in Dimmer Module (INSTEON Plug.in modules)

Lamp-/Dimmer module, Plug-in, ON / OFF / DIM.
  • Remotely control lamps: brighten, dim and turn on and off
  • Easy to install plug-in module
  • Customizable settings: 32 brightness levels and 4 ramp rates
  • Full local control (brighten/dim, on/off, and fast on/fast off)
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance
  • X10 Compatible

Item #: 2632-432-PLG-DIMMER

Availability: 2 available

EUR 51,99
- 25%
EUR 38,99






Album Insteon Forum Insteon Developer Program

Details

Insteon plug-in Dimmer Module (G Plug).

Model: 08702

The plug-in dimmer module from Insteon offers, besides the ON/OFF option, the ability to dim your lights!

The installation will only take a few seconds! By simple placing the module between a socket and your light, the installation is complete. Connecting lights to your Insteon home automation system has never been this easy!

The plug-in module is powered and controlled through your 230V mains. The module receives INSTEON signals from your mains, making it possible to operate with an Insteon controller! In addition, the module can also be manually operated by the switch that is mounted on the side of the module.

This model is supplied with an G-plug (also available with an F-plug or U-plug).

If you prefer a plug-in module without a DIM option, we recommend the Insteon On/off Module.

Specs

TECHNICAL DATA

INSTEON

  • INSTEON powerline mesh repeater: Yes
  • INSTEON RF mesh repeater: Yes
  • INSTEON controller: Yes
  • INSTEON responder: Yes
  • Maximum links/scenes: 400
  • Load brightness levels: 32 when controlled locally (256 remotely)

LED:

  • Beep on button press: Beeps when button is pressed (must be enabled via software)
  • LED brightnes:s Adjustable, from off to bright
  • Local on-level: Adjustable, 32 fixed brightness levels or resume dim
  • Local ramp-rate: Adjustable from 0.1 seconds to 5 seconds locally (0.1 seconds to 8 minutes via software)
  • Local control: Yes
  • LED signals:
    • Green: when load is on, red when load is off
    • Blinks green: once when all responders acknowledge (can be disabled via software)
    • Blinks red: once if responder does not acknowledge
    • Blinks red or green: during setup
    • Blinks red: to indicate traffic (must be enabled via software)
  • Beep on button press: Beeps when button is pressed (must be enabled via software)
  • LED brightnes:s Adjustable, from off to bright
  • Local on-level: Adjustable, 32 fixed brightness levels or resume dim
  • Local ramp-rate: Adjustable from 0.1 seconds to 5 seconds locally (0.1 seconds to 8 minutes via software)
  • Local control: Yes
  • Commands supported as controller:
    • On / Off
    • Fast-on / Fast-off
    • Begin brighten / Begin dim
    • End brighten / End dim
  • Commands supported as responder:
    • On / Off
    • Fast-on / Fast-off
    • Begin brighten / Begin dim
    • End brighten / End dim
    • Incremental brighten / Incremental dim
    • Beep
  • Software configurable: Yes
  • RF range: Up to 50 meters (150 feet) open air
  • Phase bridge detect beacon: Yes

X10

  • X10 address: 1 optional (comes unassigned)
  • X10 transmitter: Yes
  • X10 receiver: Yes
  • X10 status response: Supported
  • X10 resume dim: Supported (by setting local on-level to zero)
  • X10 minimum transmit level: 3.2 Vpp into 5 Ohms
  • X10 minimum receive level: 20mV into 5 Ohms
  • X10 messages repeated: No

Mechanical

  • Mounting: AC outlet
  • Wires: NA
  • Screw clamp connections: NA
  • Case color: White
  • Set button: 1
  • Plastic: UV stabilized polycarbonate
  • Beeper: Yes
  • LED: 1, RGB
  • Dimensions: 10cm H x 4.3cm W x 3.4cm
  • Weight: 130g 10g
  • Operating environment: Indoors
  • Operating humidity: range 0-90% relative humidity

Electrical

  • Voltage: 100VAC to 240VAC
  • Frequency: 50/60Hz auto detected at power-up
  • Maximum load: 300W (@ 240VAC) 300W (@ 120VAC)
  • Minimum load: 5 Watts
  • Load type(s): Lighting: Incandescent, dimmable CFL, dimmable halogen, select dimmable LED (compatible with LED bulbs that support leading edge triac dimming.)
  • Hardwired remote control: N/A
  • Retains all settings without power :Yes, saved in non-volatile EEPROM
  • Standby power consumption: < 0.75 watts
  • Safety approved: CE, C-Tick
  • Certifications:
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure INSTEON Plug-in Lights Dimmer Module Quick Start Guide
Manual INSTEON Plug-in Lights Dimmer Module Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2342-432-SWT-MINIREMOTE4


Haibrain INSTEON 2342-432 Wireless Mini Remote 4 Scenes (INSTEON Wall switches)

Use This Wireless Remote Anywhere; Wall, Tabletop, Car or In Your Hand!
  • Provides wireless remote control for INSTEON controlled lighting and appliances
  • Elegant design and super-easy setup
  • Raise and lower lighting levels or recall a favorite lighting level for up to four lights or scenes - wirelessly!
  • Use as a portable handheld remote or mount it on the wall for use as a keypad
  • Battery operated - requires no external power or communication wiring and it's rechargeable
  • 50 ft range to nearest dual-band device
  • Also available in an 8-scene version for more control.

Item #: 2342-432-SWT-MINIREMOTE4

Availability: last 1 available

EUR 45,99
- 25%
EUR 34,49






Album Insteon Forum Insteon Developer Program

Details

Insteon Mini Remote 4 Scene
Model: 08707 This small yet versatile remote control fits in the palm of your hand and controls up to four individual devices or four groups of devices. It can also be wall mounted, used in your car with a visor clip or sit on a coffee table with a tabletop stand (accessories sold separately).

The Mini Remote is an easy-to-use wireless remote that allows you to control INSTEON bulbs, dimmers, switches and plug-in or receptacle dimmers. Now you can raise and lower light levels for multiple lights from anywhere in your house. Mini Remote is wireless, making it incredibly versatile. Use it as a lightweight handheld remote; make it a tabletop control for your nightstand, counter or coffee table by attaching it to a tabletop stand (sold separately); turn on your house lights from the car by attaching it to a visor clip (sold separately); or mount it to the wall to create a wireless keypad in the perfect location - without having to rewire (wall mount bracket and wallplate sold separately). The Mini Remote is ultra-easy to install and operate, giving you the most flexibility for a truly smart home with INSTEON.

micro-USB
Required Accessories
  • USB Charging Cable is required to charge Mini Remote. With the cable you can charge by plugging the cable into a computer USB port or into a USB power adapter.
  • If the INSTEON device you intend to control does not receive RF signals (i.e., power line only), you will need at least one dual-band INSTEON device to convert the RF signals to power line signals.
What's Included
  • INSTEON Mini Remote, 4 Scene
  • Rechargeable battery (pre-installed, non-replaceable)
  • Quick-start guide

Specs

TECHNICAL DATA

INSTEON

  • Scenes: 4 (default), configurable to 8
  • Scene Configurations: 4 On/Off (default), 8 Toggle or 8 Always On
  • Maximum scene Links: 400
  • Scene Commands Supported:
    • On / Off
    • Begin Brightening / Begin Dimming
    • End Brightening / End Dimming
    • Fast On / Fast Off
  • Software Configurable: Yes
  • X10 Support: None

Operation

  • LED Type Two-color: Green and Red
  • LED during Use:
    • Green Flash Once: On (sent), Bright, Fast-On
    • Red Flash Once: Off, Dim Page, Fast-Off
    • Red Blink for ~3 Seconds: Scene Acknowledge Missing
  • LED: Always used for setup, default On during use
  • Setup Button: Yes
  • On/Off Switch: Yes
  • Beeper: Yes, configurable
  • Battery Charging LED: Yes, Embedded (shines red through case during charge)
  • RF Range: 50 Line-of-Sight
  • RF Frequency: 915MHz (US), 869MHz (EU), 921MHz (AUS/NZ)
  • Retains all settings without power: Yes, all saved in Non-volatile EEPROM

Mechanical

  • Color: White
  • Plastic: UV Stabilized ABS
  • Dimensions: 2.6" H x 1.3" W x 0.39" D
  • Weight: 1 Oz.
  • Button Style: Plastic Paddles over Contact Switches
  • Optional Hardware: Wall Mount, Tabletop Stand, Visor Clip
  • Operating Environment: Indoors, 32F to 104F, up to 85% relative humidity

Electrical

  • Battery type: 3.7 VDC Lithium Polymer, Rechargeable, non-replaceable
  • Battery life (between charges): 9-12 months under standard usage
  • Battery Re-charging cycles: > 500 recharging cycles
  • Recharging jack: Standard, Micro-USB, 5VDC
  • Recharging time: 1 hour

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure Mini Remote 4 Scene Quick Start Guide
Manual Mini Remote 4 Scene Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2342-422-SWT-MINIREMOTE8


Haibrain INSTEON 2342-422 Wireless Mini Remote 8 Scenes (INSTEON Wall switches)

Use This Wireless Remote Anywhere; Wall, Tabletop, Car or In Your Hand!
  • Provides wireless remote control for INSTEON controlled lighting and appliances
  • Elegant design and super-easy setup
  • Raise and lower lighting levels or recall a favorite lighting level for up to eight lights or scenes - wirelessly!
  • Use as a portable handheld remote or mount it on the wall for use as a keypad
  • Battery operated - requires no external power or communication wiring and it's rechargeable
  • 50 ft range to nearest dual-band device
  • Also available in an 4-scene version.

Item #: 2342-422-SWT-MINIREMOTE8

Availability: last 1 available

EUR 45,99
- 25%
EUR 34,49






Album Insteon Forum Insteon Developer Program

Details

Insteon Mini Remote 8 Scene
Model: # 2342-422 This small yet versatile remote control fits in the palm of your hand and controls up to eight individual devices or eight groups of devices. It can also be wall mounted, used in your car with a visor clip or sit on a coffee table with a tabletop stand (accessories sold separately).

The Mini Remote is an easy-to-use wireless remote that allows you to control INSTEON bulbs, dimmers, switches and plug-in or receptacle dimmers. Now you can raise and lower light levels for multiple lights from anywhere in your house. Mini Remote is wireless, making it incredibly versatile. Use it as a lightweight handheld remote; make it a tabletop control for your nightstand, counter or coffee table by attaching it to a tabletop stand (sold separately); turn on your house lights from the car by attaching it to a visor clip (sold separately); or mount it to the wall to create a wireless keypad in the perfect location - without having to rewire (wall mount bracket and wallplate sold separately). The Mini Remote is ultra-easy to install and operate, giving you the most flexibility for a truly smart home with INSTEON.

micro-USB
Required Accessories
  • USB Charging Cable is required to charge Mini Remote. With the cable you can charge by plugging the cable into a computer USB port or into a USB power adapter.
  • If the INSTEON device you intend to control does not receive RF signals (i.e., power line only), you will need at least one dual-band INSTEON device to convert the RF signals to power line signals.
What's Included
  • INSTEON Mini Remote, 8 Scene
  • Rechargeable battery (pre-installed, non-replaceable)
  • Quick-start guide

Specs

TECHNICAL DATA
General
Product Name:INSTEON Mini Remote 8 Scene
Brand/Manufacturer:INSTEON
Manufacturer Product No.:EU2342-422
UPC:EU813922012569
Patent:Protected under U.S. and foreign patents (see www.insteon.com)
Warranty:2 years, limited
INSTEON
Scenes:8
Scene configurations:4 (On / Off), 8 Toggle or 8 Always On
Maximum links/scenes:400
Scene Commands Supported:OnOff
Begin BrighteningBegin Dimming
End BrighteningEnd Dimming
Fast OnFast Off
Software configurable:Yes
Operation
LED Type:1 Green and Red
LED During Use:Green Flash OnceOn (sent)
Bright
Fast-On
Red Flash OnceOff
Dim
Fast-Off
Red Blink for ~3 SecondsScene Acknowledge Missing
LED:Always used for setup, default On during use
Setup Button:Yes
On / Off Switch:Yes
Beeper:Yes, configurable
Battery Charger LED:Yes, embedded (shines red through case during change)
RF Range:50' Line-of-Sight
Retains all settings without power:Yes, all saved in Non-volatile EEPROM
Mechanical
Case color:White
Plastic:UV Stabilized ABS
Dimensions:6.6cm x 3.3cm x 1.0cm
Weight:28g
Optional Hardware:Wall Mount
Tabletop Stand
Visor Clip
Operating Environment:Indoors, 0C to 40C, up to 85% relative humidity
Electrical
Battery type:3.7 VDC Lithium Polymer, Rechargeable, non-replaceable
Battery life (between charges):9 - 12 months under standard usage
Battery recharging cycles:> 500 recharging cycles
Recharging jack:Standard, Micro-USB, 5VDC
Recharge time:1 hour

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure Mini Remote 8 Scene Quick Start Guide
Manual Mini Remote 8 Scene Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2342-442-SWT-REMOTELINC


Haibrain INSTEON 2342-442 Mini Remote - Switch (INSTEON Wall switches)

INSTEON Wireless Switch - EU.
  • Provides wireless remote control for INSTEON devices
  • Elegant design and super-easy setup
  • Add a wall switch anywhere, no new junction box or wiring required
  • Battery powered with an intern Lithium-Ion battery that lasts over 3 months
  • 15 meter range to nearest dual-band INSTEON device

Item #: 2342-442-SWT-REMOTELINC

Availability: last 1 available

EUR 45,99
- 25%
EUR 34,49






Album Insteon Forum Insteon Developer Program

Details

Insteon Mini Remote - Switch
Model: 08706 This small decorator-style wireless remote allows you to instantly create a switch anywhere in your home without running wires. Simply link it to an INSTEON module and have control anywhere you want it.

This small, inconspicuous wireless remote is an excellent solution when you need a switch just about anywhere. The INSTEON Wireless Switch can communicate with any INSTEON device to provide remote dimming and control capabilities. Put one on your nightstand and program it to turn off all the lights in your house or clip one to your car's visor and never walk up to a poorly illuminated front door again. The switch can be programmed to control individual lights or entire scenes. You can also configure the switch for to operate as two discrete toggle switches. The built-in Lithium-Ion battery is reachable and lasts for over three months. The Wireless Switch can be easily charged from any standard Micro-USB cable and USB port.

micro-USB
Required Accessories
  • USB Charging Cable is required to charge Mini Remote. With the cable you can charge by plugging the cable into a computer USB port or into a USB power adapter.
  • If the INSTEON device you intend to control does not receive RF signals (i.e., power line only), you will need at least one dual-band INSTEON device to convert the RF signals to power line signals.
What's Included
  • INSTEON Mini Remote, Switch
  • Rechargeable battery (pre-installed)
  • Quick-start guide

Specs

TECHNICAL DATA

Operation

  • LED Type Two-color: Green and Red
  • LED during Use:
    • Green Flash Once: On (sent), Bright, Fast-On
    • Red Flash Once: Off, Dim, Fast-Off
    • Red Blink for 3 Seconds: Scene Acknowledge Missing
  • LED: Always used for setup, default On during use
  • Setup Button: Yes
  • On/Off Switch: Yes
  • Beeper: Yes, configurable
  • Battery Charging: LED Yes, Embedded (shines red through case during charge)
  • RF Range: 50 Line-of-Sight
  • RF Frequency: 915MHz (US), 869MHz (EU), 921MHz (AUS/NZ)
  • Retains all settings without power: Yes, all saved in Non-volatile EEPROM

Mechanical

  • Color: White
  • Plastic: UV Stabilized ABS
  • Button Configurations: 1 Scene (standard), 2 Scene (optional button kit)
  • Dimensions: 2.6" H x 1.3" W x 0.39" D
  • Weight (w/battery): 1 Oz.
  • Button Style: Plastic Paddles over Contact Switches
  • Optional Hardware: Wall Mount, Tabletop Stand, Visor Clip
  • Operating Environment: Indoors, 32F to 104F, up to 85% relative humidity

Electrical

  • Battery type: 3.7 VDC Lithium Polymer, Rechargeable, non-replaceable
  • Battery life (between charges): > 3 months under standard usage
  • Battery Re-charging cycles: > 500 recharging cycles
  • Recharging jack: Standard, Micro-USB, 5VDC
  • Recharging time : 1 hour
  • Sends Low Battery Warning: Yes

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure Mini Remote Switch Quick Start Guide
Manual Mini Remote Switch Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2443-422-MIC-RELAY


Haibrain INSTEON 2443-422 Relay Micromodule (INSTEON Micromodules)

Relay Micromodule for lights and appliances.
  • Add INSTEON on/off remote control without replacing your existing switch
  • Installs behind existing latching, single momentary or dual momentary switch
  • Sense wiring retains local control at the switch
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2443-422-MIC-RELAY

Availability: last 1 available

EUR 69,99
- 25%
EUR 52,49






Album Insteon Forum Insteon Developer Program

Details

Insteon Appliance MicroModule, ON/OFF (230V, max 3600W).

Model: 08716

The Micro ON/OFF Module from Insteon enables you to control your lights/devices (up to 3600W) remotely!

The MicroModule should be connected to your (230V) mains and mounted in a wall- or junction box. This enables you to control your lights using an INSTEON controller (through INSTEON commands via the mains) or manually with the switch.

The Micro ON/OFF Module is compatible with your existing latching, single momentary or dual momentary switches.

In case you would prefer a MicroModule with the ability to dim lights, we recommend the Micro Dimmer Module.

Micro On/Off Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON: Controller and responder
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • Status LED:
    • Green when load is on, red when load is off
    • Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software)
    • Blinks green or red during setup
    • Blinks red to indicate traffic (must be enabled via software)
  • LED brightness: Adjustable from off to 100% bright
  • Local control: Yes
  • Commands supported as controller:
    • On/Off
    • Fast on/Fast off
    • Begin brighten/End brighten
    • Begin dim/End dim
  • Commands supported as responder:
    • On/Off
    • Fast on/Fast off
    • Beep
  • Software configurable: Yes
  • RF range: 150 feet (50 meters) open air (may vary due to local interference)
  • Phase detect beacon: Yes
  • X10 support: Yes
  • X10 addresses: Any 1 of 256 (unassigned by default)

Mechanical

  • Mounting: Behind switch or above light fixture in single-gang electrical box
  • Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm
  • Sense 2 (purple): 24 AWG, 0.205mm
  • Max. cable size: 4mm, 12 AWG (2.72mm diameter)
  • Min. cable size: 1.5mm, 15 AWG
  • Screw clamp connections:
    • Line
    • Load 1
    • Load 1, second terminal
    • Neutral
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized ABS+PC
  • Beeper: Yes
  • Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software)
  • LED: 1 RGB
  • Dimensions: 46.6mm H x 46.6mm W x 17.5mm D
  • Weight: 71.5g
  • Operating environment: Indoors

Electrical

  • Voltage: 100VAC to 240VAC
  • Frequency: 50/60Hz auto-detected at power-up
  • Max. load:
  • Load types: Resistive, Inductive / Capacitive, Low voltage halogen
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retain all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: <1W
  • Safety approved: ETL, CE, C-Tick
  • Certifications:
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure INSTEON Appliance MicroModule, ON/OFF Quick Start Guide
Manual INSTEON Appliance MicroModule, ON/OFF Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2442-422-MIC-DIMMER


Haibrain INSTEON 2442-422 Dimmer Micromodule (INSTEON Micromodules)

Dimmer Micromodule for lights.
  • Add INSTEON dimmable remote control without replacing your existing switch
  • Installs behind existing latching, single momentary or dual momentary switches
  • Sense wiring retains local control at the switch
  • Programmable on-level and fade on/off speed
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance
  • X10 Compatible

Item #: 2442-422-MIC-DIMMER

Availability: 3 available

EUR 69,99
- 25%
EUR 52,49






Album Insteon Forum Insteon Developer Program

Details

Insteon Lamp-/dimmer module, MicroModule, ON/OFF/DIM (230V, max 200W).

Model: 08715

The Micro Dimmer Module from Insteon transforms your existing switch into an Insteon controllable switch!

This module offers, besides the ON/OFF option, the ability to dim your lights! The integrated dimmer features 32 dim levels.

The MicroModule should be connected to your (230V) mains and mounted in a wall- or junction box. This enables you to control your lights using an INSTEON controller (through INSTEON commands via the mains) or manually with the switch.

In case you would prefer a MicroModule without the ability to dim lights, we recommend the Micro On/Off Module.

Micro Dimmer Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON: Controller and responder
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • Status LED:
    • Green when load is on, red when load is off
    • Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software)
    • Blinks green or red during setup
    • Blinks red to indicate traffic (must be enabled via software)
  • LED brightness: Adjustable from off to 100% bright
  • Local on-level: Adjustable from 32 fixed brightness levels or resume dim
  • Local ramp rate: Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 9 minutes with software)
  • Local control: Yes
  • Commands supported as controller:
    • On/Off
    • Fast on/Fast off
    • Begin brighten/End brighten
    • Begin dim/End dim
  • Commands supported as responder:
    • On/Off
    • Fast on/Fast off
    • Begin brighten/End brighten
    • Begin dim/End dim
    • Incremental brighten/Incremental dim
    • Beep
  • Software configurable: Yes
  • RF range: 150 feet open air (may vary due to local interference)
  • Phase detect beacon: Yes
  • X10 support: Yes
  • X10 addresses: Any 1 of 256 (unassigned by default)

Mechanical

  • Mounting: Behind switch or above light fixture in single-gang electrical box
  • Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm
  • Sense 2 (purple): 24 AWG, 0.205mm
  • Max. cable size: 4mm, 12 AWG (2.72mm diameter)
  • Min. cable size: 1.5mm, 15 AWG
  • Screw clamp connections:
    • Line
    • Load
    • Neutral 1
    • Neutral 2
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized ABS+PC
  • Beeper: Yes
  • Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software)
  • LED: 1 RGB
  • Operating environment: Indoors

Electrical

  • Voltage: 100VAC to 240VAC
  • Frequency: 50/60Hz auto-detected at power-up
  • Min. load:
    • 5W at 240VAC
    • 5W at 120VAC
  • Max. load:
    • 200W at 240VAC
    • 100W at 140VAC
  • Load types: Incandescent
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retain all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: <1W
  • Safety approved: ETL, CE, C-Tick
  • Certifications:
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure INSTEON Lights MicroModule, DIMMER Quick Start Guide
Manual INSTEON Lights MicroModule, DIMMER Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2444-422-MIC-SHUTTER


Haibrain INSTEON 2444-422 Shutter Micromodule (INSTEON Micromodules)

Shutter Micromodule for blinds and curtains.
  • Add INSTEON remote control to motor-controlled shutters, blinds, projector screens and more
  • Installs behind existing switch
  • Sense wiring retains local control at the switch
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2444-422-MIC-SHUTTER

Availability: last 1 available

EUR 69,99
- 25%
EUR 52,49






Album Insteon Forum Insteon Developer Program

Details

Insteon Micro Open / Close (i.e. Sunblinds).

Model: 08717

The Micro Open/Close Module from Insteon is specifically designed for two-direction motorized devices. The module enables you to control motorised (230V) shutters, blinds, projector screens, and more remotely!

The MicroModule should be connected to your (230V) mains and mounted in a wall- or junction box. To enable manual control, the module should be linked to a switch. This system is compatible with latching, single momentary and dual momentary switches.

The Micro Open/Close Module can be controlled manually or remotely with INSTEON commands through the mains (existing wiring) and RF.

Micro Open/Close Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON: Controller and responder
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • Status LED:
    • Green when load is on, red when load is off
    • Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software)
    • Blinks green or red during setup
    • Blinks red to indicate traffic (must be enabled via software)
  • LED brightness: Adjustable from off to 100% bright
  • Local control: Yes
  • Commands supported as controller:
    • On/Off
    • Fast on/Fast off
    • Begin brighten/End brighten
    • Begin dim/End dim
  • Commands supported as responder:
    • Open (On)/Close (Off)
    • Begin raise (brighten)/Begin lower (dim)
    • End raise (brighten)/End lower (dim)
    • Beep
  • Software configurable: Yes
  • RF range: 150 feet (50 meters) open air (may vary due to local interference)
  • Phase detect beacon: Yes
  • X10 support: Yes
  • X10 addresses: Any 1 of 256 (unassigned by default)

Mechanical

  • Mounting: Behind switch or above light fixture in single-gang electrical box
  • Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm
  • Sense 2 (purple): 24 AWG, 0.205mm
  • Max. cable size: 4mm, 12 AWG (2.72mm diameter)
  • Min. cable size: 1.5mm, 15 AWG
  • Screw clamp connections:
    • Line
    • Load 1 (up)
    • Load 2 (down)
    • Neutral
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized ABS+PC
  • Beeper: Yes
  • Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software)
  • LED: 1 RGB
  • Dimensions: 46.6mm H x 46.6mm W x 17.5mm D
  • Weight: 71.5g
  • Operating environment: Indoors
  • Operating temperature range: 0 to 40C
  • Operating humidity range: 0-90% relative humidity
  • Storage temperature range: -20 to 70C

Electrical

  • Voltage: 100VAC to 240VAC
  • Frequency: 50/60Hz auto-detected at power-up
  • Load types: Resistive, Inductive / Capacitive, Low voltage halogen, Motor
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retain all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: <1W
  • Safety approved: ETL, CE, C-Tick
  • Certifications:
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure INSTEON Micro Open / Close, Quick Start Guide
Manual INSTEON Micro Open / Close, Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2453-422-PRO-RELAY


Haibrain INSTEON 2453-422 Relay DIN Rail Module (INSTEON Professional)

Relay DIN Rail Module for lights and appliances.
  • Add INSTEON remote control directly to your INSTEON setup
  • Snaps onto a DIN rail
  • Sense wiring retains local control at the switch
  • Compatible with latching, single momentary and dual momentary switches
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2453-422-PRO-RELAY

Availability: last 1 available

EUR 74,99
- 25%
EUR 56,24






Album Insteon Forum Insteon Developer Program

Details

Insteon Appliance module, DIN rail mounting, on / off (230V, 16A).

Model: 08714

Use the INSTEON DIN Rail Appliance module to create complicated but organized appliance/lighting circuits. Rather than mount multiple switches in a wall, install a single keypad and run all your wiring back to a central location. The INSTEON DIN Rail Appliance module fits a standard EN 50022 DIN rail for ease in mounting.

In case you would prefer an INSTEON DIN Rail Dimmer module with the ability to dim lights, we recommend the Insteon Lamp-/dimmer DIN module.

DIN Rail On/Off Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON powerline mesh repeater: Yes
  • INSTEON RF mesh repeater: Yes
  • INSTEON controller: Yes
  • INSTEON responder: Yes
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • LED brightness: Adjustable, from off to bright
  • LED signals:
    • Green: when load is on, red when load is off.
    • Blinks red: when responder does not acknowledge (can be disabled via software).
    • Blinks red or green: during setup.
  • Local control: Yes
  • Commands supported as controller: On/off, Fast on/off, Begin brighten/dim, End brighten/dim
  • Commands supported as responder: On/off, Fast on/off, Beep
  • Software configurable: Yes, RF range Up to 150 feet (50 meters) open air (Range may vary due to local interference)
  • Phase detect beacon: Yes

X10

  • X10 address: 1 optional (comes unassigned)
  • X10 transmitter: Yes
  • X10 receiver: Yes
  • X10 status response: Supported
  • X10 resume dim: Supported (by setting local on-level to zero)
  • X10 minimum transmit level: 3.2 Vpp into 5 Ohms
  • X10 minimum receive level: 20mV into 5 Ohms
  • X10 messages repeated: No

Mechanical

  • Mounting: 35mm (top hat) DIN Rail
  • Wires: NA
  • Max Cable Size: 4mm2, 12 AWG (2.72mm Diameter)
  • Min Cable Size: 1.5mm2, 15 AWG
  • Screw DIN Rail connections: Line, Neutral, Load, Sense 1, Sense 2
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized polycarbonate
  • Beeper: Yes
  • Beep on button press: Optional (off by default)
  • LED: 1, RGB
  • Dimensions: 80mm x 52mm x 63mm
  • Weight: 175g
  • Operating environment: Indoors

Electrical

  • Voltage: 100VAC to 240VAC
  • RF Frequency: US 915 MHz, EU 869 MHz, AUS/NZ 921 MHz
  • Electrical Frequency: 50/60Hz auto detected at power-up
  • Load type(s): Resistive, Inductive/capacitive, Low voltage halogen
  • Minimum load: None
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retains all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: < 1 watt
  • Safety approval(s): ETL, CE, C-Tick
  • Certifications
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure Insteon Appliance module, DIN rail mounting Quick Start Guide
Manual Insteon Appliance module, DIN rail mounting Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2452-422-PRO-DIMMER


Haibrain INSTEON 2452-422 Dimmer DIN Rail Module (INSTEON Professional)

Dimmer DIN Rail Module for lights.
  • Add INSTEON dimmable remote control directly to your wired lights
  • Snaps onto a DIN rail
  • Sense wiring retains local control at the switch
  • Programmable on-level and fade on/off speed
  • Compatible with latching, single momentary and dual momentary switches
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2452-422-PRO-DIMMER

Availability: 3 available

EUR 74,99
- 25%
EUR 56,24






Album Insteon Forum Insteon Developer Program

Details

Insteon Lamp-/dimmer module, DIN rail mounting, on / off / dim.

Model: 08713

Use the INSTEON DIN Rail Dimmer to create complicated but organized lighting circuits. Rather than mount multiple switches in a wall, install a single keypad and run all your wiring back to a central location. The INSTEON DIN Rail Dimmer fits a standard EN 50022 DIN rail for ease in mounting.

In case you would prefer an Insteon Appliance module, DIN rail, with the ability to switch lights On/Off, we recommend the Insteon Appliance module, DIN rail.

DIN Rail Dimmer Schematics

Specs

TECHNICAL DATA

INSTEON

  • INSTEON powerline mesh repeater: Yes
  • INSTEON RF mesh repeater: Yes
  • INSTEON controller: Yes
  • INSTEON responder: Yes
  • Maximum links/scenes: 400
  • Load brightness levels: 32 locally (256 with software)
  • LED brightness: Adjustable, from off to bright
  • LED signals:
    • Green: when load is on, red when load is off.
    • Blinks red: when responder does not acknowledge (can be disabled via software).
    • Blinks red or green: during setup.
  • Local on-level: Adjustable, 32 fixed brightness levels or resume dim
  • Local ramp-rate: Adjustable from 0.1 seconds to 5 seconds locally (0.1 seconds to 8 minutes via software)
  • Local control: Yes
  • Commands supported as controller: On/off, Fast on/off, Begin brighten/dim, End brighten/dim
  • Commands supported as responder: On/off, Fast on/off, Beep
  • Software configurable: Yes, RF range Up to 150 feet (50 meters) open air (Range may vary due to local interference)
  • Phase bridge detect beacon: Yes
  • INSTEON device category: 0x01 dimmable lighting control (all frequencies)

X10

  • X10 address: 1 optional (comes unassigned)
  • X10 transmitter: Yes
  • X10 receiver: Yes
  • X10 status response: Supported
  • X10 resume dim: Supported (by setting local on-level to zero)
  • X10 minimum transmit leve:l 3.2 Vpp into 5 Ohms
  • X10 minimum receive level: 20mV into 5 Ohms
  • X10 messages repeated: No

Mechanical

  • Mounting: 35mm (top hat) DIN Rail
  • Wires: NA
  • Max Cable Size: 4mm2, 12 AWG (2.72mm Diameter)
  • Min Cable Size: 1.5mm2, 15 AWG
  • Screw DIN Rail connections: Line, Neutral, Load, Sense 1, Sense 2
  • Case color: White
  • Set button: Yes
  • Plastic: UV stabilized polycarbonate
  • Beeper: Yes
  • Beep on button press: Optional (off by default)
  • LED: 1, RGB
  • Dimensions: 80mm x 52mm x 63mm
  • Weight: 175g
  • Operating environment: Indoors
  • Operating humidity range: 0-90% relative humidity

Electrical

  • Voltage: 100VAC to 240VAC
  • RF Frequency: US 915 MHz, EU 869 MHz , AUS/NZ 921 MHz
  • Electrical Frequency: 50/60Hz auto detected at power-up
  • Load type(s): Resistive, Low voltage halogen, Incandescent
  • Maximum load: 300 watts
  • Minimum load: 5 watts
  • Hardwired remote control: Yes, either latching or momentary switches supported
  • Retains all settings without power: Yes, saved in non-volatile EEPROM
  • Standby power consumption: < 1 watt
  • Safety approval(s): ETL, CE, C-Tick
  • Certifications
    • FCC 15.107, 15.109, 15.249
    • RSS 210
    • EN 300 220-2, 301 489-3
    • AS/NZS 4268, CISPR 22
    • UL 1472
    • IEC 60669-2-1

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure Insteon Appliance module, DIN rail mounting Quick Start Guide
Manual Insteon Appliance module, DIN rail mounting Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2842-422-SEN-MOTION


Haibrain INSTEON 2842-422 Motion Sensor (INSTEON Remote sensors)

INSTEON Wireless Motion Sensor - EU.
  • Built-in countdown timer automatically turns lights off after you leave
  • Optional night-only mode allows you to keep your lights off during the day
  • Adjustable high/low motion sensitivity provides flexibility of motion sensor placement
  • Powered by a single 9-Volt battery
  • Send email alerts when combined with the INSTEON Hub+

Item #: 2842-422-SEN-MOTION

Availability: last 1 available

EUR 46,99
- 25%
EUR 35,24






Album Insteon Forum Insteon Developer Program

Details

INSTEON Motion Sensor
Model: 08709 Trigger any INSTEON-compatible device or scene with the adjustable Wireless Motion Sensor.

The INSTEON Wireless Motion Sensor gives your INSTEON system the ability to automatically react to changes in motion. Small and unobtrusive, the Wireless Motion Sensor can be placed anywhere using the included mounting bracket. Powered by a 9-Volt battery, the Motion Sensor can send commands to turn on lights or entire scenes by communicating directly with other INSTEON devices. The sensor includes the ability to differentiate between daylight and darkness and has an adjustable sensing range.

Add the INSTEON Hub+ and the Wireless Motion Sensor can now be configured to send email alerts about the status of your home. Place one on the front porch and you'll be alerted as soon as someone walks up to your door.

What's Included
  • Wireless Motion Sensor
  • Mounting bracket
  • 2 mounting screws
  • 9V battery
  • Quick-start guide

Specs

TECHNICAL DATA
General
Brand:INSTEON
Manufacturer Product No.:2842-2422 (formerly 2420M)EU
Color:White
Range:150' (line of sight)
Frequency:915MHz ISM Band
Warranty:2 years,limited
UPC:813922012989 EU
Patent No.:Protected under U.S. and foreign patents (see www.insteon.com)
Operation
Sensitivity Modes:High (default) or Normal
Status LED:1, Red behind PIR lens, normally off, blinks during setup
Setup Memory:Non-volatile EEPROM
Motion Detection Range:up to 110 arc, 12.2m
Motion Detector Sense Input Type:PIR and photocell
Operating Temperature Range:Indoor / Outdoor, 0 to 120F. Note: PIR reliability may vary with temperature
Operating Humidity Range:10% - 90%
INSTEON Features
INSTEON Addresses:1 hard-coded out of 16,777,216 possible
INSTEON RF:Yes
INSTEON Links:30
INSTEON Device Category:0x10
INSTEON Device Subcategory:0x01
INSTEON Product Key (IPK):0x00004A
INSTEON powerline mesh repeater:No
INSTEON RF mesh repeater:Yes
INSTEON controller:Yes
Maximum links/scenes:400
Mechanical
Dimensions:2 1/4" x 3 1/4" x 1 7/8"
Weight40z
CertificationsEN 300 220-2, 301 489-3
CE
Electrical
Input Power Voltage Type:9VDC
Power Supply:9VDC battery (included)
Battery Life:6 months min.
FCC ID:SBP2420M
X10 Features
X10 Support:N/A

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure INSTEON Motion Sensor Quick Start Guide
Manual INSTEON Motion Sensor Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2843-422-SEN-DOORWINDOW


Haibrain INSTEON 2843-422 Open/Close Sensor (INSTEON Remote sensors)

INSTEON Wireless Open/Close Sensor - EU.
  • Automatically control lights and appliances when doors open and close
  • Wire standard security sensors to Open/Close Sensor to monitor several doors and windows
  • Battery-operated for easy installation
  • Excellent range - up to 150' from nearest Access Point or RF INSTEON device

Item #: 2843-422-SEN-DOORWINDOW

Availability: 2 available

EUR 46,99
- 25%
EUR 35,24






Album Insteon Forum Insteon Developer Program

Details

Insteon Wireless Open/Close Sensor (for doors/windows)
Model: 08710 Wireless Open/Close Sensor is a magnetic contact closure sensor that wirelessly controls lights and appliances throughout your house: Open/Close Sensor can do things like turn on lights, set the thermostat or trigger a custom event in HouseLinc.

The Wireless Open/Close Sensor from Insteon is a magnetic contact sensor which wirelessly controls lights and appliances throughout your house!

The wireless Open/Close Sensor is a small and robust system which has to be installed on both moving, and non-moving parts of your window- and doorframes. Once contact between the two magnetic parts is interrupted, the sensor sends Insteon commandos (pre-set) to your lights and other INSTEON Modules.

A pre-set commando example: The moment you enter your front door, your lights and thermostat will be activated!

What's Included
  • INSTEON Open/Close Sensor
  • Magnet
  • AA Battery
  • Mounting tape
  • Quick-start guide

Specs

TECHNICAL DATA
  • Status LED: Green. Blinks on activation
  • Operational Gap: 1/2" between magnet and main case
  • Sense Modes: Jumper Installed:
    • Open = Group 1 On, Closed = Group 1 Off
    • Jumper Uninstalled: Open = Group 1 On (or off), Closed = Group 2 On (or Off)
  • Aux. Sensor Input: Senses contact closure
  • Aux. Sensor Input Wire: >= 20 gauge wire
  • Setup Memory: Non-volatile EEPROM

INSTEON

  • INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
  • INSTEON controller: Yes
  • INSTEON responder: No
  • Maximum links/scenes: 30
  • Software configurable: Yes
  • RF range: Up to 150 feet (50 meters) open air (Range may vary due to local interference)

Mechanical

  • Case color: White
  • Set button: Yes
  • Dimensions Main:
    • Case: 3.46" x 1.32" x 0.76" (88mm x 34mm x 19mm)
    • Magnet: 2.28" x 0.55" x 0.43" (58mm x 14mm x 11mm)
  • Weight 3.5 oz (99g)
  • Operating environment: Indoors
  • Operating temperature range: 32 to 104 F (0 to 40 C)
  • Operating humidity range: 0-85% relative humidity
  • Storage temperature range: -4 o to 158 F (-20 to 70 C)

Electrical

  • Power: 1 AA Alkaline Battery (included)
  • Battery Life: 6 months (w/ 2 links @ 50 activations per day)
  • Certification: FCC & Industry Canada

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure INSTEON Open/Close Sensor Quick Start Guide
Manual INSTEON Open/Close Sensor Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2672-422-LED-E27BULB


INSTEON A19 LED Bulb 2672-422 (INSTEON LED Bulbs)

INSTEON LED Bulb - The Smartest Bulb for Recessed Lights in the World.
  • Energy-saving, 12W LED bulb shines as brightly as a 75W incandescent bulb
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance
  • Software configurable: link to additional controllers, add to scenes and customize ramp rates and brightness levels
  • Up to 52,000 hour life
  • Remote Controlled
  • Energy efficient
  • Dimmable

Item #: 2672-422-LED-E27BULB

Availability: last 1 available

EUR 51,99
- 25%
EUR 38,99






Album Insteon Forum Insteon Developer Program

Details

That old bulb is so 1870s.

Model: 2674-422

INSTEON LED Bulbs are award winning for a reason: packed into each bulb is both energy efficient power saving LED illumination as well as advanced INSTEON technology for complete remote control throughout your home. It's easy to control using INSTEON Wall Switches, Keypads, wireless Mini Remotes and even your smartphone when used with the INSTEON Hub.

LED bulb
Enhanced with the INSTEON Hub

For the easiest control solution, pair an INSTEON LED Bulb with the INSTEON Hub. You can use your smartphone to configure multiple Bulbs and remotely control them directly from your mobile device, INSTEON Hub even gives you access to useful features like scheduling. Learn more about the INSTEON Hub.

Energy Efficient - Less Waste

Even with all of the advanced INSTEON technology packed into each LED Bulb, the INSTEON LED Bulb for Recessed Lights uses a mere 12 Watts of electricity. But that doesn't mean your LED Bulb will be dull - every LED Bulb is as bright as a 75W incandescent light.

INSTEON LED Bulbs can last a long time - so long that you would need over 50 traditional light bulbs to match the lifespan of just one INSTEON LED Bulb. The energy efficient LEDs in each bulb are designed to last up to 52,000 hours. Compare that to just 1,000 hours with a tungsten light bulb.

LED bulb remote control
Dramatic Energy Saving

20% of the average home energy bill is due to lighting. With each INSTEON LED Bulb using only 13% of the electricity of a regular incandescent, you can see how the savings can add up. And because INSTEON LED Bulbs put out less heat, you'll even save energy on cooling, too.

Color temperature

But just as important as energy efficiency, we know how important the right color of light can be. Every INSTEON LED Bulb is color calibrated to 2900K for that familiar warm glow.

Dimmable - Not All Light Bulbs are created Equal

When it comes to lighting control, on and off just doesn't cut it. But the move to energy efficient light bulbs like CFLs and LED bulbs has generally meant that your lights can no longer dim. From the start, INSTEON LED Bulbs were designed for dimming*. In fact, you can fully brighten and dim INSTEON LED Bulbs from any INSTEON Wall Switch, Keypad, wireless Mini Remote or even your smartphone when used with the INSTEON Hub.

Insteon bulb many controls options

Specs

TECHNICAL DATA
Brand Insteon
Product name INSTEON LED Bulb
Manufacturer product nr 2672-222
UPC 813922013023
Warranty 2 year carry-in
INSTEON Powerline mesh repeater Yes
INSTEON RF mesh repeater Yes
Maximum links/scenes 400
Load brightness levels 32 (256 with software)
LED NA
Beep on button press No
LED brightness NA
Local on-level NA
Local ramp rate NA
Local control NA
Commands supported as controller None
Commands supported as responder On/Off, Fast-On/Fast-Off, Begin Brighten/Begin Dim, Beep
Software configurable Yes
RF range 50 meter
Mounting Medium Edison light bulb socket (B22 Bayonet Base UK)
Wires NA
Screw clamp connections NA
Set button NA
Beeper NA
Dimensions 72mm Diameter x 119mm Length
Operating environment Indoors
Operating temperature range 0 to 40 C / 32 to 104 F
Operating humidity range 0 - 90% relative humidity
Storage temperature range NA
Voltage 240 Volts AC 10%, 50Hz (EU)
Frequency RF: 915.0 Mhz
Maximum load NA
Minimum load NA
Load type(s) NA
Remote control NA
Retains all settings without power Yes, saved in non-volatile EEPROM
Standby power consumption < 0.75 watt
Safety approved NA
Certifications FCC ID: SBP26722 LED Bulb

Manuals

Brochure INSTEON LED Bulb for Recessed Lights Quick Start Guide
Manual INSTEON LED Bulb for Recessed Lights Owner's Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany, Italy and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.

WARNING: To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
2732-432-HVAC-WTHERMOSTAT


Haibrain INSTEON 2732-432 Wireless Thermostat (INSTEON HVAC)

Place an INSTEON Wireless Thermostat anywhere you want.
  • Wirelessly control an INSTEON Thermostat and activate other devices when the temperature changes
  • Create separate temperature zones with multiple Wireless Thermostats
  • Battery-powered (2x AA) with energy-saving standby mode
  • All settings preserved through power failures in non-volatile memory
  • Use with included tabletop stand or mounted on a wall
  • Use as an ON/OFF INSTEON controller: PLEASE READ CAREFULLY THE "Warning" tab

Item #: 2732-432-HVAC-WTHERMOSTAT

Availability: last 1 available

EUR 94,99
- 25%
EUR 71,24






Album Insteon Forum Insteon Developer Program

EU 869 MHz

Details

INSTEON Thermostat

INSTEON Wireless Thermostat with Humidity Sensor.
Model #2732-432 Description: place a thermostat anywhere you want. With an INSTEON Wireless Thermostat linked to your INSTEON Thermostat, you get room-specific, customized temperature control. Link it to control other INSTEON devices based on the rooms temperature and/or humidity status.

The INSTEON Wireless Thermostat lets you control and monitor the temperature of your home or business with a quick and easy installation and the prevent reliability of INSTEON technology. Save energy and money by remotely controlling and monitoring your thermostat. Utilizing the built-in 7-day scheduling, you can guarantee that your heating and cooling system is only active when you're home.

The Thermostat communicates wirelessly to other INSTEON devices and can serve as an INSTEON controller for lights and appliances too. Add the INSTEON Hub and the INSTEON Thermostat can be monitored and controlled from anywhere in the world. If you know you're going to be home late, you can preempt your Thermostat's schedule and keep the heat off until you're on your way. Catch an early flight in the middle of summer? Tell the thermostat you'll be home early and have a chilled home waiting for you. Using a Wireless Mini Remote, you can even add control from other rooms in the house. Pairing a Mini Remote lets you increment the temperature from anywhere in your home so you don't have to get out of bed or off of the couch to change the temperature to your liking.

You can pair up to two INSTEON Wireless Thermostats with a hard-wired INSTEON Thermostat and control the temperature of multiple zones in your home. The INSTEON Wireless Thermostat does not connect directly to a HVAC system. For direct control, an INSTEON Thermostat is required with a 24VAC, 5-wire HVAC system. If your home uses 120/240V radiant heating, consider using an INSTEON Wireless Thermostat and an On/Off Micro Module; no hard-wired thermostat needed.

Specs

TECHNICAL DATA
General
Product Name:INSTEON Wireless Thermostat
Brand/Manufacturer:INSTEON
Manufacturer Product No.:EU2732-432
UPC:EU813922012873
Patent:Protected under U.S. and foreign patents (see www.insteon.com)
Warranty:2 years, limited
INSTEON
INSTEON powerline mesh repeater:No
INSTEON RF mesh repeater:Yes
INSTEON controller:Yes
INSTEON responder:Yes
Maximum links/scenes:400
LED:Dual-color, blinds red or green during setup
LED brightness:LED can be enabled or disabled locally or via software
Local control:Yes
Commands supported as controller:OnOff
Commands supported as responder:N/A
Software configurable:Yes
RF range:Up to 50 meters open air
Phase bridge detect beacon:No, RF only device
INSTEON device category:0x05 (all frequencies)
INSTEON device category:2732-232 (915 MHz)0x0A
2732-432 (869 MHz)0x11
2732-532 (921 MHz)0x12
X10
X10 address:N/A
X10 transmitter:N/A
X10 receiver:N/A
X10 status response:N/A
X10 resume dim:N/A
X10 minimum transmit level:N/A
X10 minimum receive level:N/A
X10 messages repeated:N/A
Mechanical
Mounting:Tabletop stand or wall-mount
Wire connections:N/A
Screw clamp connections:Yes, 4 position
Case color:White
Set button:1
Plastic:UV stabilized ABS
Beeper:Yes
Beep on button press:Optional (off by default)
Dimensions:5.7" x 3.6" x 3" (14.5cm x 9.1cm x 7.6cm)
Weight:0.55 lbs (8.8 oz)
Operating environment:Indoors
Operating temperature range:39F - 104F (4C - 40C)
Operating humidity range:0 - 90% relative humidity
Storage temperature range:-4F - 158F (-20C - 70C)
Electrical
Voltage:5 VDC
Frequency:N/A
Load types:N/A
Maximum load:N/A
Minimum load:N/A
User replaceable fuse:No
Hardwired remote control:N/A
Retains all settings without power:Yes, saved in non-volatile EEPROM
Standby power consumption:22 ?A
Certifications:EN 300 220-1, 301 489-3
CE

In order to continue improving the product, INSTEON reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure INSTEON Wireless Thermostat Brochure
Manual INSTEON Wireless Thermostat Manual

Software

Download the INSTEON for Hub - Android app on the Google Play Store or the INSTEON for Hub - iPhone and iPad app on the Apple App Store or the INSTEON for Hub - Windows 8.1 app on the Windows Store.

Apple App Store    Apple App Store    Windows Store

Warning

WARNING: The Thermostat can activate other INSTEON devices when the temperature changes. Used as an INSTEON CONTROLLER it allows linking an INSTEON RESPONDER (e.g. ON/OFF micromodule) to manage ON/OFF heating/cooling systems, WITHOUT temperature control via Apps, at present.

WARNING: This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.
To control devices that are not RF-compatible, you'll need at least one dual-band device to convert the RF signal from the remote into power line signals. Up to two INSTEON Wireless Thermostats can be added.

WARNING: Technical Assistance and FAQ on all INSTEON products are managed exclusively by the INSTEON Forum Knowledge Base.

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP