PMX-RCV-304RXN


MCR-304N Single-Output Receiver (Visonic Receivers)

Single-channel wireless Receiver with PowerCode(TM) technology.
  • Cost-effective system upgrading from wireless to wired.
  • Designed for security alarm and control applications.
  • Easily integrated into most alarm control panels.
  • Supports up to 10 wireless devices in a single output.
  • Full supervision to ensure continuous system operation at all times.
  • Frequency: 868.95 MHz
  • Provides low battery, tamper, inactivity and RF jamming output indications.
  • Supports the complete variety of Visonic PowerCode(TM) and CodeSecure(TM) wireless devices.

Item #: PMX-RCV-304RXN

Availability: Contact us



EUR 116,16






Details

The MCR-304N superheterodyne receiver is designed for easy and cost-effective upgrading, enabling hard-wired control panels to operate with wireless remote devices. Compatible with all Visonic PowerCode(TM) and CodeSecure(TM) devices, the MCR-304N receiver supports up to 10 wireless devices - including hand-held and portable units, window/door transmitters and a variety of detectors and other devices.

The MCR-304N is designed for wireless alarm, emergency and arm/disarm applications as well as for remote control systems and gate openers for garage and parking lots. It is easy to install and program utilizing a unique "Easy Learn" technique for transmitter enrolment. It provides all the features professionals require, including low battery reporting, tamper protection, RF signal jamming and transmitter inactivity output indication.

When used with CodeSecure(TM) devices, the MCR-304N implements a rolling code encryption algorithm to prevent "code grabbing" by potential intruders trying to defeat the security system.

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO.

Contacts

 
PMX-RCV-308RXN


MCR-308N 16-Output Receiver (Visonic Receivers)

16-Output Wireless PowerCode(TM) Receiver.
  • Cost-effective system upgrading from wireless to wired.
  • Designed for security alarm and control applications.
  • Easily integrated into most alarm control panels.
  • Supports up to 28 zones and 112 wireless devices.
  • Full supervision to ensure continuous system operation at all times.
  • Frequency: 868.95 MHz
  • Provides low battery, tamper, inactivity and RF jamming output indications.
  • Supports the complete variety of Visonic PowerCode(TM) and CodeSecure(TM) wireless devices.

Item #: PMX-RCV-308RXN

Availability: Contact us



EUR 166,98






Details

The MCR-308N superheterodyne receiver is designed for easy and cost-effective upgrading, enabling hard-wired control panels to operate with wireless remote devices. Compatible with all Visonic PowerCode(TM) and CodeSecure(TM) devices, the MCR-308N receiver has 4 zones, each accommodating up to 4 transmitter devices. It is easily expanded using up to three MCX-8 zone expanders, for a total of 28 zones and 112 wireless devices in a single system. Dry contact outputs can be provided, using the RL-8 relay module that converts 8 open collector outputs to dry contact outputs.

The MCR-308N is designed for wireless alarm, emergency and arm/disarm applications as well as for remote control systems and gate openers for garage and parking lots. It is easy to install and program utilizing a unique "Easy Learn" technique for transmitter enrolment. It provides all the features professionals require, including low battery reporting, tamper protection, RF signal jamming and transmitter inactivity output indication.

When used with CodeSecure(TM) devices, the MCR-308N implements a rolling code encryption algorithm to prevent "code grabbing" by potential intruders trying to defeat the security system.

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO.

Contacts

 
PMX-RCV-008RXN


MCX-8 8-Zone Expander (Visonic Receivers)

8-Zone Expander for the MCR-308N Wireless Receiver.
  • Adds 8 outputs to the MCR-308N receiver.
  • Up to 3 MCX-8 units can be added to each MCR-308N unit.
  • Can be installed at the control panel with up to 1 kilometer (0.62 mile) distance from the receiver using a supervised bus.
  • Secure reliable communication with MCR-308N receiver.
  • Frequency: 868.95 MHz
  • Compact and easily installed.

Item #: PMX-RCV-008RXN

Availability: Contact us



EUR 76,23






Details

The MCX-8 is an 8-zone output expander designed to increase the number of outputs of the MCR-308N wireless receiver. Up to three MCX-8 expanders, with eight "open collector" outputs each, can be added to the MCR-308N via a supervised communication bus. Dry contact outputs can be provided if needed, using the RL-8 relay module that converts 8 open collector outputs to dry contact outputs.

For maximum convenience, the expander modules can be installed either close to the receiver or at the control panel end, with a distance of up to 1 kilometer (0.62 mile) between the receiver and the expanders. The MCR-308N receiver continuously monitors the communication bus, issuing inactivity alerts in case the connection is interrupted.

The MCX-8's printed circuit board is enclosed in a plastic cabinet for easy installation and added protection. The base can accommodate one or two MCX-8 units, or an MCX-8 and an MCR-308N unit. For tamper protection, an on-board switch is activated when the front cover is removed.

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO.

Contacts

 
PMX-RCV-RL8


8-Relay Board (Visonic Receivers)

8-Relay Board for MCR-308N Receiver.

Item #: PMX-RCV-RL8

Availability: Contact us



EUR 38,72






Details

8-Relay Board for MCR-308N Receiver.

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO.

Contacts

 
PMX-RCV-RX600N


MCX-600N Wireless Repeater (Visonic Receivers)

PowerCode(TM) Wireless Repeater.
  • Extends communication range between a PowerCode(TM) receiver and any wireless PowerCode transmitter.
  • Supports Visonic PowerCode(TM) wireless panels and receivers.
  • Up to 16 repeaters can be used in a system.
  • PowerCode(TM) ID factory-selected from 16 million possible combinations.
  • Smart anti-collision mechanism supports multiple simultaneous transmissions.
  • Fully supervised.
  • Frequency: 868.95 MHz
  • Power supply: 12 VDC.
  • 9-Volt nickel cadmium rechargeable backup battery.
  • Compact and easily installed.

Item #: PMX-RCV-RX600N

Availability: Contact us



EUR 203,28






Details

The MCX-600N wireless repeater extends the communication range of PowerCode(TM) solutions systems, by relaying data between any PowerCode(TM) receiver and remote wireless transmitters. Up to 16 auxiliary repeaters can be positioned between the farthest group of receivers transmitters and the receiver.

For maximum security, the MCX-600N repeater uses a unique, factory programmed, randomly selected 24-bit digital alarm ID code during each transmission. This code is selected from 16 million possible code combinations and is therefore unique and virtually impossible to accidentally reproduce.

Other important benefits of the MCX-600N include the unique anti-collision transmission sequence, which ensures accurate reception of simultaneous signals from multiple transmitters. The fully supervised repeater issues a test report on an hourly basis, indicating faults such as power failure, low battery charge and tampering.

Powered by 13-20 VDC or 11-16 VDC power supply, the MCX-600N uses a 9-Volt Nickel Cadmium rechargeable battery as a backup in case of power failure.

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO.

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP