PMX-SEN-TOWER20AM


TOWER-20AM MCW (Visonic sensors)

Outdoor Wireless Motion Sensor with Anti-masking.
  • Superior outdoor detection with virtually no false alarms
  • Fully wireless, ideal for difficult installations
  • Innovative Octa-Quad technology accurately determines whether motion is legitimate, minimizing false alarms while ensuring the effective detection of real threats
  • Vandal-resistant design, enabled by patentedV-Slot® technology, delivers unprecedented resistance to environmental interference and vandalism
  • Obsidian Black Mirror™ technology provides extremely high immunity to white light
  • Adaptive, active IR provides complete anti-masking protection (patented)
  • Patented, market-leading elliptical optics provide a longer detection range along with excellent detection sensitivity and false alarm immunity
  • 12m x 12m (40ft x 40ft) / 90o coverage with true creep zone down looking optics
  • Installer-selectable, anti-masking setup can provide Trouble/Masking event notification without triggering an alarm to suit specific installation needs (When connected to PowerMax, PowerMax+ or MCR-308 receiver, turn ON the switch in order to send masking alerts to the control panel)
  • Compatible with all types of PowerMax panels and MCR receivers
  • Complies with international standards and certifications in Europe and USA, as well as IP55 rating

Item #: PMX-SEN-TOWER20AM

Availability: Contact us



EUR 447,70






Details

Ground-breaking wireless outdoor mirror detector with anti-masking ; provides unparalleled alarm detection in outdoor environments.

Outdoor Wireless Mirror Detector with Anti-masking

TOWER®-20AM MCW is a ground-breaking,anti-masking wireless mirror detector that provides unparalleled alarm detection in outdoor environments due to the unique patented technologies it employs. It is the first detector to prevent false alarms caused by outdoor interferences, such as rain, snow, lightning storms, swaying bushes and free-roaming animals, while still providing reliable detection of real threats.

TOWER-20AM MCW features the revolutionaryOcta-Quad™ technology which uses eight PIR sensors, as compared to only one sensor found in other outdoor detectors. Each sensor acts as a Quad detector to accurately determine whether an alarm is justified. In addition, to further increase reliability, TOWER-20AM MCW has a robust housing and patented anti-masking protection that can distinguish between masking spray, rain and sprinkler irrigation, providing an exceptionally high resistance to vandalism and masking.

When used with Visonic’s PowerMax® advanced home security system*, the TOWER-20AM MCW wireless outdoor detector provides a complete solution for the protection of the house, inside and out.

Specs

TECHNICAL DATA
  • Coverage: 12 m - 90°.
  • Pet immunity: up to 18 kg
  • ANTIMASKING: YES
  • Power supply: 2x 3V Lithium batteries
  • Average battery life: 3 years
  • Wireless frequency: 868 MHz
  • Dimensions: 157x147x124 mm
  • Weight: 600 g
  • EMI immunity: CE and EN 50131

In order to continue improving the product, Visonic reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure TOWER-20AM MCW Brochure

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-200EXTN


Curtain Dual Passive Infrared Detector (Sensori Visonic)

Outdoor Wireless Motion Sensor with Magnetic Contact.
  • Pulse count: 1 or 2 Pulses in 2,5 seconds
  • Lens type: Fresnel
  • Alarm LED: ON/OFF selectable to be left STRICTLY in OFF position after installation
  • Tampering: Internal contact
  • Transmission: PowerCode® VISONIC Protocol of frequency 868MHz.
  • Max coverage area: 5m x 1.2m

Item #: PMX-SEN-200EXTN

Availability: Contact us



EUR 263,78

RE200EXTN Sensor




Details

Dual passive infrared curtain detector.

Dual detector with magnetic contact in white and brown color

Novelty to increase safety of VISONIC wireless installations. It is a dual passive infrared detector-channel SUPERVISED WIRELESS, OUTDOOR, curtain effect for doors and windows with alarm Selectable (AND/OR logic), provided with additional magnetic contact. It works in conjubction with VISONIC console/receiver with frequency 868MHz (PowerMax PLUS, PowerMax Xpress, PowerMax PRO). Available in 2 models with the same features, in white and brown colors.

Specs

TECHNICAL DATA
  • Power supply: Nr. 2x 3,6Vcc Lithium Batteries
  • Absorption: 75 µA Idle mode - 900µA in Alarm
  • Battery life: 4 years
  • Operational Temperature: From -20°C to +50°C.
  • Temperature compensation: Automatic
  • Environmental Humidity: 85% Max.
  • IP Protection Grade: IP 54
  • Dimensions (LxHxD): 265 x 36 x 36 mm

In order to continue improving the product, Visonic reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure Visonic Home Safety Catalogue

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-3500PLN


NEXT+ PIR MCW (Visonic sensors)

PowerCode(TM) Wireless Digital PIR Detector.
  • 15m (50 ft) 90o multiple-curtain coverage with "wall" creep zone
  • Enhanced false alarm immunity by combined Fresnel and cylindrical optics
  • Fully supervised wireless detector with anti-collision PowerCode technology
  • Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers
  • 3 Volt long life high power standard Lithium battery
  • Long-term stability and reliability thanks to advanced true digital FM processing
  • Industry's best catch performance based on proprietary Target Specific Imaging™ and 3D cylindrical optics
  • Ultimate false alarm immunity based on patented True Motion Recognition with exceptionally high sampling rates and "Event Verification" algorithm
  • Fast and easy adjustment-free installation
  • Attractive sleek design suitable for any home or office environment
  • Meets EN50131-2 European standards
  • Next+ PIR MCW T model is offered with back tamper

Item #: PMX-SEN-3500PLN

Availability: Contact us



EUR 112,53






Details

Motion Detector Next+ PIR MCW.

PowerCode Wireless Digital PIR Detector

Next®+ PIR MCW PowerCode™ wireless digital PIR detector represents the next generation of digital wireless detectors. A fully supervised wireless detector with anti-collisionPowerCode technology,Next+ PIR MCW is compatible with PowerMax® and all Visonic PowerCode wireless panels and receivers.

Next+ PIR MCW implements industry-leading patented technologies including FM Digital Signal Processing (FM-DSP), "True Motion Recognition"™ with Fuzzy Logic algorithm (TMR), and state of the art 3D cylindrical optics.

The result is the industry's best detection accuracy, false alarm immunity and ultimate long term reliability – in an attractive, easily installed wireless detector designed for any home or office environment.

Specs

TECHNICAL DATA
  • Range: max 15 m, 90°
  • Power supply: Lithium batteries
  • Relay output: NC
  • WALK-TEST: LED
  • Beam counter: 1 or 2 selectable
  • Operating Temperature: from -10° to 50°C ; from 0 to 40°C for IMQ
  • Dimensions: 63,5 x 94,5 x 49 mm
  • Weight: 50 g

In order to continue improving the product, Visonic reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure Visonic Home Safety Catalogue

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-985PIRN


NEXT+ PIR K9-85 MCW (Visonic sensors)

PowerCode(TM) Wireless Pet-Tolerant Digital PIR Detector.
  • Pet-tolerant for animals up to 38 kg (85 lb)
  • 15m (50 ft) 90o multiple-curtain coverage with "wall" creep zone
  • Enhanced false alarm immunity by combined Fresnel and cylindrical optics
  • Fully supervised wireless detector with anti-collision PowerCode technology
  • Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers
  • 3 Volt long life high power standard Lithium battery
  • Long-term stability and reliability thanks to advanced true digital FM processing
  • Industry's best catch performance based on proprietary Target Specific Imaging™ and 3D cylindrical optics
  • Ultimate false alarm immunity based on patented True Motion Recognition with exceptionally high sampling rates and "Event Verification" algorithm
  • Fast and easy adjustment-free installation
  • Attractive sleek design suitable for any home or office environment
  • Meets EN50131-2 European standards
  • Next+ PIR MCW T model is offered with back tamper

Item #: PMX-SEN-985PIRN

Availability: Contact us



EUR 119,79






Details

Pet-tolerant Detector Next+ K9-85 MCW

PowerCode Wireless Pet-tolerant Digital PIR Detector

Next+ K9-85 MCW PowerCode™ wireless digital PIR detector represents the next generation of digital wireless detectors. A fully supervised wireless detector with anti-collisionPowerCode technology,Next+ K9-85 MCW is compatible with PowerMax® and all Visonic PowerCode wireless panels and receivers.

Next+ K9-85 MCW implements industry-leading patented technologies including FM Digital Signal Processing (FM-DSP), "True Motion Recognition"™ with Fuzzy Logic algorithm (TMR), and state of the art 3D cylindrical optics.

The result is the industry's best detection accuracy, false alarm immunity and ultimate long term reliability – in an attractive, easily installed wireless detector designed for any home or office environment.

Specs

TECHNICAL DATA
  • Range: max 15 m, 90°
  • Power supply: Lithium batteries
  • Relay output: NC
  • WALK-TEST: LED
  • Beam counter: 1 or 2 selectable
  • Operating Temperature: from -10° to 50°C ; from 0 to 40°C for IMQ
  • Dimensions: 63,5 x 94,5 x 49 mm
  • Weight: 50 g

In order to continue improving the product, Visonic reserves the right to change specifications and/or designs without prior notice

Manuals

Brochure Visonic Home Safety Catalogue

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-CLIP4N


Motion Curtain Detector CLIP MCW (Visonic sensors)

Ultra-small wireless curtain PIR detector.
  • A fully-supervised wireless curtain-type detector with anti-collision PowerCode technology
  • Compatibility with members of the PowerMax family and all Visonic PowerCode wireless panels and receivers
  • Fast and easy installation
  • Digital FM technology incorporating an advanced selector (2m, 4m and 6m) for optimized detection and false alarm processing
  • Ultimate false alarm elimination via patented TMR algorithm
  • 3-volt long-life high power standard lithium battery
  • Attractive, sleek design suitable for any home or office
  • Several optional frequencies available in compliance with international standards
  • Clip MCW T model is offered with back tamper

Item #: PMX-SEN-CLIP4N

Availability: Contact us



EUR 119,79






Details

Ultra-small wireless curtain PIR detector

Clip MCW is the industry's smallest and most elegant wireless curtain-type PIR detector designed for the protection of doors, windows and all-glass walls. This fully-supervised detector featuring anti-collision PowerCode™ technology is compatible with the PowerMax® wireless family and other Visonic PowerCode wireless receivers.

Clip MCW creates a protective curtain enabling complete coverage for properties with large or subdivided windows, doors and all-glass walls. Clip MCW provides full perimeter protection while allowing consumers to normally and freely use the premises without triggering a false alarm.

Clip MCW uses advanced patented digital FM signal processing, as well as the well-known patented TMR™ algorithm to enable three different detection modes (2m, 4m, 6m) in a single detector, each programmable for optimal performance with the unit's specific application. Advanced motion analysis enables Clip MCW to distinguish human motion from other disturbances for the most accurate detection and the fewest false alarms.

Clip MCW is available in several optional frequencies in compliance with European, U.S. and other international standards.

Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-CON302N


MCT-302N Wireless Door/Window sensor (Visonic sensors)

Fully Supervised PowerCode(TM) Magnetic Contact Transmitter.
  • Magnetic contact and auxiliary input for external devices.
  • User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors).
  • Superior transmission range.
  • Fully supervised.
  • Frequency: 868.95 MHz
  • PowerCode(TM) ID factory-selected from 16 million possible combinations.
  • Smart anti-collision mechanism supports multiple simultaneous transmissions.
  • Long-life standard lithium battery included.
  • Low-battery signaling.
  • Compatible with PowerMax(TM) and all Visonic PowerCode(TM) wireless panels and receivers.

Item #: PMX-SEN-CON302N

Availability: Contact us



EUR 75,02

Visonic Door/Window sensor




Details

The MCT-302N is a fully supervised PowerCode(TM) magnetic contact transmitter, designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.

An additional hard-wired, end-of-line (EOL) protected input can be used, with normally open (NO) and normally closed (NC) pushbuttons, sensors, contacts, switches and other detection devices, for a variety of security and control applications.

When activated, the magnetic contact and the auxiliary input initiate an individual 24-bit PowerCode(TM) ID message, which identifies it to the target receiver as a separate transmitter. Each ID code is randomly selected from 16 million possible combinations, and is therefore unique and virtually impossible to accidentally reproduce.

A smart anti-collision algorithm prevents signal jamming by simultaneous transmission from multiple devices. Periodic transmission of supervision signals is used to confirm system connectivity at all times.

Each transmitter is powered by a standard long-life lithium battery, which is constantly monitored, with automatic reporting to the receiver when the battery needs to be replaced.

Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-501MICN


Glass break microphone (Visonic sensors)

Wireless Glass Break Environmental Microphone.
  • Sensor: Omnidirectional
  • Frequency: 868.95 MHz
  • Power supply: 3,6V Lithium battery
  • Supervised with Low-battery signalling.
  • Transmission range: 6 m.
  • Dimensions: 80 x 108 x 43 mm (W x H x D)

Item #: PMX-SEN-501MICN

Availability: Contact us



EUR 215,38






Details

Glass break sensor supervised via radio, compatible with Visonic PowerCode(TM) systems. Designed for a wide range of residential and commercial applications. It uses a patented technology by Visonic that's able to discriminate between false alarms and glass breaking. The Glass Break Microphone has an omnidirectional covering of 360°.

Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-RIN425N


Wireless smoke detector (Visonic sensors)

PowerCode(TM) Wireless Smoke Detector with Low-battery signalling and buzzer.
  • Sensor: Single-cell Photoelectric smoke detector.
  • Alarm power: 85 dB @ 3 metres distance
  • Frequency: 868.95 MHz
  • Supervised every 15 minutes
  • Power supply: 9 V Alkaline or Lithium battery
  • Transmission range: 80 m. free-air
  • Dimensions: Ø 140 x 45 mm (D x T)

Item #: PMX-SEN-RIN425N

Availability: Contact us



EUR 154,88






Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-RIN109VRD


Wireless optical smoke detector (Visonic sensors)

Optical smoke detector with PowerCode(TM) output and buzzer.

Item #: PMX-SEN-RIN109VRD

Availability: Contact us



EUR 45,98






Details

Wireless optical smoke detector. Complete of buzzer. 9Vcc battery power supply.

Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-ACQ550N


Water leak/ Flood sensor (Visonic sensors)

Wireless Water Leak/ Flood Sensor with Low-battery signalling.
  • Detects water leaks or watery liquids leaks.
  • Frequency: 868,95 MHz
  • Wall-mountable in all rooms where it might happen water leaks or widening
  • Supervised every 15 minutes
  • Cable sensor length: 3 metres
  • Power supply: 3V Lithium battery
  • Dimensions: 81 x 22 x 23.5 mm (W x H x D)

Item #: PMX-SEN-ACQ550N

Availability: Contact us



EUR 118,58






Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-CONT800


Wire Contact for rolling blinds (Visonic sensors)

Sensor for connection with Universal Transmitter.
  • Allows protection of the rolling blind by triggering an alarm condition during the first attempt of lifting
  • Installation with rolling blind already mounted
  • Spring type
  • Material: ABS
  • Dimensions: 100 x 90 x 15 mm

Item #: PMX-SEN-CONT800

Availability: Contact us



EUR 16,46






Dettagli

Sensore contatto a filo per tapparelle, per collegamento al Trasmettitore Universale MCT-100N.

Specifiche

Nota: Per far apprendere il dispositivo su un ricevitore o su una centrale via radio PowerMax Visonic, al momento della registrazione mandare in allarme il singolo ingresso (es. tirare la cordicella del dispositivo tapparella) così da registrare l'ingresso specifico.

Avviso

ATTENZIONE: Adatto per PowerMax PLUS/PRO.

FAQ

Contatti

 
PMX-SEN-CONT802


Wire Contact for COMPACT rolling blinds (Visonic sensors)

Sensor for connection with Universal Transmitter.
  • Allows protection of the rolling blind by triggering an alarm condition during the first attempt of lifting
  • Installation with rolling blind already mounted
  • Spring type
  • Material: ABS
  • Dimensions: compact

Item #: PMX-SEN-CONT802

Availability: Contact us



EUR 13,07






Dettagli

Sensore contatto a filo per tapparelle, per collegamento al Trasmettitore Universale MCT-100N.

Specifiche

Nota: Per far apprendere il dispositivo su un ricevitore o su una centrale via radio PowerMax Visonic, al momento della registrazione mandare in allarme il singolo ingresso (es. tirare la cordicella del dispositivo tapparella) così da registrare l'ingresso specifico.

Avviso

ATTENZIONE: Adatto per PowerMax PLUS/PRO.

FAQ

Contatti

 
PMX-SEN-CONT810


Analyzer for Wire Contacts for rolling blinds (Visonic sensors)

Sensor for connection with Universal Transmitter.

Item #: PMX-SEN-CONT810

Availability: Contact us



EUR 29,28






Details

Analyzer for Wire Contact sensor for rolling blinds, to be used in conjunction with MCT-100N Universal Transmitter.

Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-CONT850


Wire Contact for rolling blinds, complete of Analyzer (Visonic sensors)

Sensor for connection with Universal Transmitter.

Item #: PMX-SEN-CONT850

Availability: Contact us



EUR 59,29






Details

Wire Contact for rolling blinds, complete of Analyzer. 2,5 / 6 Volt power supply.

Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-CONT815


Interface Card for Wire Contacts for rolling blinds (Visonic sensors)

Sensor for connection with Universal Transmitter.

Item #: PMX-SEN-CONT815

Availability: Contact us



EUR 26,50






Details

Interface card for CONT800 and CONT802 sensors for rolling blinds, to be used in conjunction with MCT-100N Universal Transmitter.

Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
PMX-SEN-CON1000


Sliding sensor for rolling blinds (Visonic sensors)

Sensor for connection with Universal Transmitter.
  • Quick and easy to install
  • Installation outside the caisson
  • Cam system to avoid false alarms due to the frame bonds
  • Spring device to compensate roller blinds oscillations

Item #: PMX-SEN-CON1000

Availability: Contact us



EUR 16,09

Visonic Sliding sensor




Details

This new sensor, thanks to its small dimensions, can be easily mounted (using two screws to fix it to the frame) without the need to open the roller blinds caissons and with a price comparable to that of traditional wire contacts for rolling blinds. Sliding sensor for rolling blinds, to be used in conjunction with MCT-100N Universal Transmitter.

Specs

Note: Please register the device on a specific input of a Visonic receiver or a PowerMax wireless console, by triggering an alarm (e.g. pulling the cord of the device).

Warning

ATTENTION: Suitable for PowerMax PLUS/PRO

FAQ

Contacts

Contacts Contacts
 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP